zephyr/boards/arm/96b_argonkey/96b_argonkey.yaml

identifier: 96b_argonkey
name: 96Boards Argonkey
type: mcu
arch: arm
toolchain:
  - zephyr
  - gnuarmemb
  - xtools
ram: 256
flash: 1024
supported:
  - gpio
  - i2c
  - i2s
  - hts221
  - lps22hb
  - lsm6dsl
  - rtc
  - spi
  - vl53l0x
boards: arm: Add support for 96Boards Argonkey Board ArgonKey board is a 96boards sensor hub platform for all 96Boards compliant family products. The ArgonKey packs a Cortex-M4 chip together with a set of motion, environmental and ambiental sensors and can be used as a development platform for many different applications. Signed-off-by: Armando Visconti <armando.visconti@st.com> 2018-02-23 17:24:36 +08:00			`identifier: 96b_argonkey`
			`name: 96Boards Argonkey`
			`type: mcu`
			`arch: arm`
			`toolchain:`
			`- zephyr`
build: Replace GCC ARM Embedded with GNU Arm Embedded The old GCC ARM Embedded website on launchpad (https://launchpad.net/gcc-arm-embedded) has been superseeded by the new GNU Arm Embedded one (https://developer.arm.com/open-source/gnu-toolchain/gnu-rm). This also means a change of name from "GCC" to "GNU". Reflect this in the enviroment variables so that the proper term is used henceforth. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no> 2018-08-03 23:11:23 +08:00			`- gnuarmemb`
boards: arm: Add xtools as a supported toolchain Update all ARM boards to have xtools as a supported toolchain. Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2019-01-10 00:25:16 +08:00			`- xtools`
boards: 96b_argonkey: adapt to the board configuration guidelines As per default board configuration guidelines, this commit updates 96Boards Argonkey board. Following changes are done: - Enable exposed SPI1 - Update yaml file - Only enable basic peripherals in board defconfig - Add exposed peripherals in board Kconfig Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> 2018-10-02 22:58:17 +08:00			`ram: 256`
			`flash: 1024`
boards/arm: Enable RTC on STM32F4 based boards Enable RTC on STM32F4 based boards. Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2018-06-21 00:51:42 +08:00			`supported:`
boards: arm: 96b_argonkey.yaml: Add i2c/spi/gpio to the supported list Add i2c/spi/gpio to the supported list to enable the CI to correctly run the 96b_argonkey board sample. Signed-off-by: Armando Visconti <armando.visconti@st.com> 2018-09-28 21:55:04 +08:00			`- gpio`
			`- i2c`
board/argonkey: Add MP34DT05 microphone in DTS Add MP34DT05 pdm microphone in DTS under i2s_5 node. Signed-off-by: Armando Visconti <armando.visconti@st.com> 2018-11-13 17:14:33 +08:00			`- i2s`
boards: 96b_argonkey: Add hts221 sensor to supported list Add hts221 sensor to 96b_argonkey.yaml so we build and samples/tests associated with the hts221. Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2019-01-16 22:40:25 +08:00			`- hts221`
boards/arm: 96b_argonkey: add supported sensors to yaml file Add supported sensor to yaml file. The ArgonKey board supports following sensors: - HTS221 (humidity) - LPS22HB (pressure) - LSM6DSL (imu) - VL53L0X (proximity) Signed-off-by: Armando Visconti <armando.visconti@st.com> 2019-01-21 17:54:35 +08:00			`- lps22hb`
			`- lsm6dsl`
boards/arm: Enable RTC on STM32F4 based boards Enable RTC on STM32F4 based boards. Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2018-06-21 00:51:42 +08:00			`- rtc`
boards: arm: 96b_argonkey.yaml: Add i2c/spi/gpio to the supported list Add i2c/spi/gpio to the supported list to enable the CI to correctly run the 96b_argonkey board sample. Signed-off-by: Armando Visconti <armando.visconti@st.com> 2018-09-28 21:55:04 +08:00			`- spi`
samples: sensor: vl53l0x: Fixup sample to build all boards with it Updated the sample.yaml to use depends_on and update the board yaml that have the vl53l0x sensor. Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2019-01-19 00:02:17 +08:00			`- vl53l0x`