zephyr/include/sys_io.h

/* Port and memory mapped registers I/O operations */

/*
 * Copyright (c) 2015 Intel Corporation.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef __SYS_IO_H__
#define __SYS_IO_H__

#ifdef __cplusplus
extern "C" {
#endif

#include <stdint.h>
#include <stddef.h>

typedef uint32_t io_port_t;
typedef uint32_t mm_reg_t;
typedef uint32_t mem_addr_t;

/* Port I/O functions */

/**
 * @fn static inline void sys_out8(uint8_t data, io_port_t port);
 * @brief Output a byte to an I/O port
 *
 * This function writes a byte to the given port.
 *
 * @param data the byte to write
 * @param port the port address where to write the byte
 */

/**
 * @fn static inline uint8_t sys_in8(io_port_t port);
 * @brief Input a byte from an I/O port
 *
 * This function reads a byte from the port.
 *
 * @param port the port address from where to read the byte
 *
 * @return the byte read
 */

/**
 * @fn static inline void sys_out16(uint16_t data, io_port_t port);
 * @brief Output a 16 bits to an I/O port
 *
 * This function writes a 16 bits to the given port.
 *
 * @param data the 16 bits to write
 * @param port the port address where to write the 16 bits
 */

/**
 * @fn static inline uint16_t sys_in16(io_port_t port);
 * @brief Input 16 bits from an I/O port
 *
 * This function reads 16 bits from the port.
 *
 * @param port the port address from where to read the 16 bits
 *
 * @return the 16 bits read
 */

/**
 * @fn static inline void sys_out32(uint32_t data, io_port_t port);
 * @brief Output 32 bits to an I/O port
 *
 * This function writes 32 bits to the given port.
 *
 * @param data the 32 bits to write
 * @param port the port address where to write the 32 bits
 */

/**
 * @fn static inline uint32_t sys_in32(io_port_t port);
 * @brief Input 32 bits from an I/O port
 *
 * This function reads 32 bits from the port.
 *
 * @param port the port address from where to read the 32 bits
 *
 * @return the 32 bits read
 */


/* Memory mapped registers I/O functions */

/**
 * @fn static inline void sys_write8(uint8_t data, mm_reg_t addr);
 * @brief Write a byte to a memory mapped register
 *
 * This function writes a byte to the given memory mapped register.
 *
 * @param data the byte to write
 * @param addr the memory mapped register address where to write the byte
 */

/**
 * @fn static inline uint8_t sys_read8(mm_reg_t addr);
 * @brief Read a byte from a memory mapped register
 *
 * This function reads a byte from the given memory mapped register.
 *
 * @param addr the memory mapped register address from where to read the byte
 *
 * @return the byte read
 */

/**
 * @fn static inline void sys_write16(uint16_t data, mm_reg_t addr);
 * @brief Write 16 bits to a memory mapped register
 *
 * This function writes 16 bits to the given memory mapped register.
 *
 * @param data the 16 bits to write
 * @param addr the memory mapped register address where to write the 16 bits
 */

/**
 * @fn static inline uint16_t sys_read16(mm_reg_t addr);
 * @brief Read 16 bits from a memory mapped register
 *
 * This function reads 16 bits from the given memory mapped register.
 *
 * @param addr the memory mapped register address from where to read
 *        the 16 bits
 *
 * @return the 16 bits read
 */

/**
 * @fn static inline void sys_write32(uint32_t data, mm_reg_t addr);
 * @brief Write 32 bits to a memory mapped register
 *
 * This function writes 32 bits to the given memory mapped register.
 *
 * @param data the 32 bits to write
 * @param addr the memory mapped register address where to write the 32 bits
 */

/**
 * @fn static inline uint32_t sys_read32(mm_reg_t addr);
 * @brief Read 32 bits from a memory mapped register
 *
 * This function reads 32 bits from the given memory mapped register.
 *
 * @param addr the memory mapped register address from where to read
 *        the 32 bits
 *
 * @return the 32 bits read
 */

/* Memory bits manipulation functions */

/**
 * @fn static inline void sys_set_bit(mem_addr_t addr, int bit)
 * @brief Set the designated bit from addr to 1
 *
 * This functions takes the designated bit starting from addr and sets it to 1.
 *
 * @param addr the memory address from where to look for the bit
 * @param bit the designated bit to set (from 0 to n)
 */

/**
 * @fn static inline void sys_clear_bit(mem_addr_t addr, int bit)
 * @brief Clear the designated bit from addr to 0
 *
 * This functions takes the designated bit starting from addr and sets it to 0.
 *
 * @param addr the memory address from where to look for the bit
 * @param bit the designated bit to clear (from 0 to n)
 */

/**
 * @fn static inline int sys_test_bit(mem_addr_t addr, int bit)
 * @brief Test the bit if it is set or not
 *
 * This functions takes the designated bit starting from addr and tests its
 * current setting. If it return the current setting.
 *
 * @param addr the memory address from where to look for the bit
 * @param bit the designated bit to test (from 0 to n)
 *
 * @return 1 if it is set, 0 otherwise
 */

/**
 * @fn static inline int sys_test_and_set_bit(mem_addr_t addr, int bit)
 * @brief Test the bit and set it
 *
 * This functions takes the designated bit starting from addr, tests its
 * current setting and sets it. It will return the previous setting.
 *
 * @param addr the memory address from where to look for the bit
 * @param bit the designated bit to test and set (from 0 to n)
 *
 * @return 1 if it was set, 0 otherwise
 */

/**
 * @fn static inline int sys_test_and_clear_bit(mem_addr_t addr, int bit)
 * @brief Test the bit and clear it
 *
 * This functions takes the designated bit starting from addr, test its
 * current setting and clears it. It will return the previous setting.
 *
 * @param addr the memory address from where to look for the bit
 * @param bit the designated bit to test (from 0 to n)
 *
 * @return 0 if it was clear, 1 otherwise
 */

#ifdef __cplusplus
}
#endif

#endif /* __SYS_IO_H__ */