zephyr/boards/arm/twr_ke18f/pinmux.c

150 lines
4.4 KiB
C
Raw Normal View History

/*
* Copyright (c) 2019 Vestas Wind Systems A/S
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <init.h>
#include <drivers/pinmux.h>
#include <fsl_port.h>
static int twr_ke18f_pinmux_init(struct device *dev)
{
ARG_UNUSED(dev);
#ifdef CONFIG_PINMUX_MCUX_PORTA
__unused struct device *porta =
device_get_binding(CONFIG_PINMUX_MCUX_PORTA_NAME);
#endif
#ifdef CONFIG_PINMUX_MCUX_PORTB
__unused struct device *portb =
device_get_binding(CONFIG_PINMUX_MCUX_PORTB_NAME);
#endif
#ifdef CONFIG_PINMUX_MCUX_PORTC
__unused struct device *portc =
device_get_binding(CONFIG_PINMUX_MCUX_PORTC_NAME);
#endif
#ifdef CONFIG_PINMUX_MCUX_PORTD
__unused struct device *portd =
device_get_binding(CONFIG_PINMUX_MCUX_PORTD_NAME);
#endif
#ifdef CONFIG_PINMUX_MCUX_PORTE
__unused struct device *porte =
device_get_binding(CONFIG_PINMUX_MCUX_PORTE_NAME);
#endif
#ifdef CONFIG_PWM_0
/* Tri-color LED as PWM */
pinmux_pin_set(portb, 5, PORT_PCR_MUX(kPORT_MuxAlt2));
pinmux_pin_set(portd, 15, PORT_PCR_MUX(kPORT_MuxAlt2));
pinmux_pin_set(portd, 16, PORT_PCR_MUX(kPORT_MuxAlt2));
#else /* !CONFIG_PWM_0 */
/* Tri-color LED as GPIO */
pinmux_pin_set(portb, 5, PORT_PCR_MUX(kPORT_MuxAsGpio));
pinmux_pin_set(portd, 15, PORT_PCR_MUX(kPORT_MuxAsGpio));
pinmux_pin_set(portd, 16, PORT_PCR_MUX(kPORT_MuxAsGpio));
#endif /* !CONFIG_PWM_0 */
#ifdef CONFIG_PWM_3
/* User LEDs as PWM */
pinmux_pin_set(portc, 10, PORT_PCR_MUX(kPORT_MuxAlt2));
pinmux_pin_set(portc, 11, PORT_PCR_MUX(kPORT_MuxAlt2));
pinmux_pin_set(portc, 12, PORT_PCR_MUX(kPORT_MuxAlt2));
pinmux_pin_set(portc, 13, PORT_PCR_MUX(kPORT_MuxAlt2));
#else /* !CONFIG_PWM_3 */
/* User LEDs as GPIO */
pinmux_pin_set(portc, 10, PORT_PCR_MUX(kPORT_MuxAsGpio));
pinmux_pin_set(portc, 11, PORT_PCR_MUX(kPORT_MuxAsGpio));
pinmux_pin_set(portc, 12, PORT_PCR_MUX(kPORT_MuxAsGpio));
pinmux_pin_set(portc, 13, PORT_PCR_MUX(kPORT_MuxAsGpio));
#endif /* !CONFIG_PWM_3 */
/* Buttons */
pinmux_pin_set(portd, 3, PORT_PCR_MUX(kPORT_MuxAsGpio));
pinmux_pin_set(portd, 6, PORT_PCR_MUX(kPORT_MuxAsGpio));
#ifdef CONFIG_UART_MCUX_LPUART_0
/* UART0 RX, TX */
pinmux_pin_set(portb, 0, PORT_PCR_MUX(kPORT_MuxAlt2));
pinmux_pin_set(portb, 1, PORT_PCR_MUX(kPORT_MuxAlt2));
#endif
#ifdef CONFIG_SPI_0
/* SPI0 SCK, SIN, SOUT */
pinmux_pin_set(porte, 0, PORT_PCR_MUX(kPORT_MuxAlt2));
pinmux_pin_set(porte, 1, PORT_PCR_MUX(kPORT_MuxAlt2));
pinmux_pin_set(porte, 2, PORT_PCR_MUX(kPORT_MuxAlt2));
#endif
#ifdef CONFIG_BOARD_TWR_KE18F_SPI_0_PCS2
/* SPI0 PCS2 */
pinmux_pin_set(porte, 6, PORT_PCR_MUX(kPORT_MuxAlt2));
#else
pinmux_pin_set(porte, 6, PORT_PCR_MUX(kPORT_MuxAsGpio));
#endif
#ifdef CONFIG_SPI_1
/* SPI1 SCK, SIN, SOUT */
pinmux_pin_set(portd, 0, PORT_PCR_MUX(kPORT_MuxAlt3));
pinmux_pin_set(portd, 1, PORT_PCR_MUX(kPORT_MuxAlt3));
pinmux_pin_set(portd, 2, PORT_PCR_MUX(kPORT_MuxAlt3));
#endif
#ifdef CONFIG_BOARD_TWR_KE18F_SPI_1_PCS0
/* SPI1 PCS0 */
pinmux_pin_set(portd, 3, PORT_PCR_MUX(kPORT_MuxAlt3));
#else
pinmux_pin_set(portd, 3, PORT_PCR_MUX(kPORT_MuxAsGpio));
#endif
#ifdef CONFIG_BOARD_TWR_KE18F_SPI_1_PCS2
/* SPI1 PCS2 */
pinmux_pin_set(porta, 16, PORT_PCR_MUX(kPORT_MuxAlt3));
#else
pinmux_pin_set(porta, 16, PORT_PCR_MUX(kPORT_MuxAsGpio));
#endif
#ifdef CONFIG_BOARD_TWR_KE18F_FLEXIO_CLKOUT
/* CLKOUT */
pinmux_pin_set(porte, 10, PORT_PCR_MUX(kPORT_MuxAlt2));
#endif
#if CONFIG_I2C_0
/* LPI2C0 SCL, SDA - FXOS8700 */
pinmux_pin_set(porta, 3, PORT_PCR_MUX(kPORT_MuxAlt3));
pinmux_pin_set(porta, 2, PORT_PCR_MUX(kPORT_MuxAlt3));
#endif
#if CONFIG_I2C_1
/* LPI2C1 SCL, SDA - Elevator connector */
pinmux_pin_set(portd, 9, PORT_PCR_MUX(kPORT_MuxAlt2));
pinmux_pin_set(portd, 8, PORT_PCR_MUX(kPORT_MuxAlt2));
#endif
#if CONFIG_CAN_0
/* FlexCAN0 RX, TX */
pinmux_pin_set(porte, 4, PORT_PCR_MUX(kPORT_MuxAlt5));
pinmux_pin_set(porte, 5, PORT_PCR_MUX(kPORT_MuxAlt5));
#endif
/* FXOS8700 INT1, INT2, RST */
#ifdef DT_INST_0_NXP_FXOS8700_INT1_GPIOS_PIN
pinmux_pin_set(porta, 14, PORT_PCR_MUX(kPORT_MuxAsGpio));
#endif
#ifdef DT_INST_0_NXP_FXOS8700_INT2_GPIOS_PIN
pinmux_pin_set(portc, 17, PORT_PCR_MUX(kPORT_MuxAsGpio));
#endif
pinmux_pin_set(portc, 15, PORT_PCR_MUX(kPORT_MuxAsGpio));
#ifdef CONFIG_ADC_0
/* Thermistor A, B */
pinmux_pin_set(porta, 0, PORT_PCR_MUX(kPORT_PinDisabledOrAnalog));
pinmux_pin_set(porta, 1, PORT_PCR_MUX(kPORT_PinDisabledOrAnalog));
/* Potentiometer */
pinmux_pin_set(portc, 14, PORT_PCR_MUX(kPORT_PinDisabledOrAnalog));
#endif
return 0;
}
SYS_INIT(twr_ke18f_pinmux_init, PRE_KERNEL_1, CONFIG_PINMUX_INIT_PRIORITY);