zephyr/samples/bluetooth/hci-usb/Makefile

KERNEL_TYPE = unified
CONF_FILE = prj.conf
BOARD ?= quark_se_c1000_devboard

include $(ZEPHYR_BASE)/Makefile.inc
Bluetooth: Use unified kernel build for tests and samples This makes all Bluetooth samples and tests being build with unified kernel. main() is now executed from init thread and specifying task for it in mdef file is no longer needed. By default main stack is 1024 bytes and this should be enough for BT samples. Change-Id: I6674eea2c028b78ada5190acef72937186738af2 Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com> 2016-10-24 18:02:25 +08:00			`KERNEL_TYPE = unified`
Bluetooth: Export USB HCI controller using RAW HCI channel The application exports Bluetooth controller over USB as USB HCI dongle using RAW HCI channel introduced in the previous patch. When connected to Linux is should be handled by btusb driver. usb-devices output: T: Bus=05 Lev=03 Prnt=121 Port=00 Cnt=01 Dev#= 22 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8086 ProdID=ff02 Rev=01.00 S: Manufacturer=Intel S: Product=BTUSB12 S: SerialNumber=00.01 C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Change-Id: I8bc362876353b6c97eb7051f4cdff3d8a9f55abd Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> 2016-08-08 15:43:36 +08:00			`CONF_FILE = prj.conf`
boards: rename Quark SE Devboard to Quark SE C1000 This board now has an official name and will be available soon: http://www.intel.com/content/www/us/en/embedded/products/quark/mcu/se-soc/overview.html Jira: ZEP-758 Change-Id: Ia16d33722308cf81471321c3063bdc75055a4d50 Signed-off-by: Anas Nashif <anas.nashif@intel.com> 2016-08-30 20:41:04 +08:00			`BOARD ?= quark_se_c1000_devboard`
Bluetooth: Export USB HCI controller using RAW HCI channel The application exports Bluetooth controller over USB as USB HCI dongle using RAW HCI channel introduced in the previous patch. When connected to Linux is should be handled by btusb driver. usb-devices output: T: Bus=05 Lev=03 Prnt=121 Port=00 Cnt=01 Dev#= 22 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8086 ProdID=ff02 Rev=01.00 S: Manufacturer=Intel S: Product=BTUSB12 S: SerialNumber=00.01 C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Change-Id: I8bc362876353b6c97eb7051f4cdff3d8a9f55abd Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> 2016-08-08 15:43:36 +08:00
			`include $(ZEPHYR_BASE)/Makefile.inc`