OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/samples/bluetooth/mesh/microbit_gatt.conf

63 lines
1.4 KiB
Plaintext
Raw Normal View History

Bluetooth: Mesh: Add initial implementation Add an initial implementation for the Bluetooth Mesh Profile Specification. The main code resides in subsys/bluetooth/host/mesh and the public API can be found in include/bluetooth/mesh.h. There are a couple of samples provided as well under samples/bluetooth and tests/bluetooth. The implementation covers all layers of the Bluetooth Mesh stack and most optional features as well. The following is a list of some of these features and the c-files where the implementation can be found: - GATT & Advertising bearers (proxy.c & adv.c) - Network Layer (net.c) - Lower and Upper Transport Layers (transport.c) - Access Layer (access.c) - Foundation Models, Server role (health.c & cfg.c) - Both PB-ADV and PB-GATT based provisioning (prov.c) - Low Power Node support (lpn.c) - Relay support (net.c) - GATT Proxy (proxy.c) Notable features that are *not* part of the implementation: - Friend support (initial bits are in place in friend.c) - Provisioner support (low-value for typical Zephyr devices) - GATT Client (low-value for typical Zephyr devices) Jira: ZEP-2360 Change-Id: Ic773113dbfd84878ff8cee7fe2bb948f0ace19ed Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-06-16 17:30:54 +08:00
#CONFIG_INIT_STACKS=y
CONFIG_MAIN_STACK_SIZE=320
CONFIG_IDLE_STACK_SIZE=128
driver: ILI9340 LCD display driver Minimal driver for ILI9340 LCD display driver including support for adafruit 2.2" LCD display (1480) Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2017-10-06 14:34:43 +08:00
CONFIG_DISPLAY=y
Bluetooth: Mesh: Add initial implementation Add an initial implementation for the Bluetooth Mesh Profile Specification. The main code resides in subsys/bluetooth/host/mesh and the public API can be found in include/bluetooth/mesh.h. There are a couple of samples provided as well under samples/bluetooth and tests/bluetooth. The implementation covers all layers of the Bluetooth Mesh stack and most optional features as well. The following is a list of some of these features and the c-files where the implementation can be found: - GATT & Advertising bearers (proxy.c & adv.c) - Network Layer (net.c) - Lower and Upper Transport Layers (transport.c) - Access Layer (access.c) - Foundation Models, Server role (health.c & cfg.c) - Both PB-ADV and PB-GATT based provisioning (prov.c) - Low Power Node support (lpn.c) - Relay support (net.c) - GATT Proxy (proxy.c) Notable features that are *not* part of the implementation: - Friend support (initial bits are in place in friend.c) - Provisioner support (low-value for typical Zephyr devices) - GATT Client (low-value for typical Zephyr devices) Jira: ZEP-2360 Change-Id: Ic773113dbfd84878ff8cee7fe2bb948f0ace19ed Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-06-16 17:30:54 +08:00
CONFIG_MICROBIT_DISPLAY=y
CONFIG_SYS_CLOCK_TICKS_PER_SEC=250
CONFIG_GPIO=y
Bluetooth: Kconfig: Rename CONFIG_BLUETOOTH_* to CONFIG_BT_* The API name space for Bluetooth is bt_* and BT_* so it makes sense to align the Kconfig name space with this. The additional benefit is that this also makes the names shorter. It is also in line with what Linux uses for Bluetooth Kconfig entries. Some Bluetooth-related Networking Kconfig defines are renamed as well in order to be consistent, such as NET_L2_BLUETOOTH. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-08-09 14:21:11 +08:00
CONFIG_BT_PERIPHERAL=y
CONFIG_BT_MESH_GATT_PROXY=y
CONFIG_BT_MESH_PB_GATT=y
CONFIG_BT_MESH_PB_ADV=n
CONFIG_BT=y
CONFIG_BT_DEVICE_NAME="Zephyr Mesh"
CONFIG_BT_TINYCRYPT_ECC=y
CONFIG_BT_RX_STACK_SIZE=1400
CONFIG_BT_L2CAP_RX_MTU=69
CONFIG_BT_L2CAP_TX_MTU=69
CONFIG_BT_L2CAP_TX_BUF_COUNT=5
Bluetooth: controller: Rename Kconfig prefix Rename the BT_CONTROLLER prefix used in all of the Kconfig variables related to the Bluetooth controller to BT_CTLR. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2017-08-14 19:45:13 +08:00
CONFIG_BT_CTLR_DUP_FILTER_LEN=0
Bluetooth: Kconfig: Rename CONFIG_BLUETOOTH_* to CONFIG_BT_* The API name space for Bluetooth is bt_* and BT_* so it makes sense to align the Kconfig name space with this. The additional benefit is that this also makes the names shorter. It is also in line with what Linux uses for Bluetooth Kconfig entries. Some Bluetooth-related Networking Kconfig defines are renamed as well in order to be consistent, such as NET_L2_BLUETOOTH. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-08-09 14:21:11 +08:00
CONFIG_BT_OBSERVER=y
CONFIG_BT_BROADCASTER=y
Bluetooth: controller: Rename Kconfig prefix Rename the BT_CONTROLLER prefix used in all of the Kconfig variables related to the Bluetooth controller to BT_CTLR. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2017-08-14 19:45:13 +08:00
CONFIG_BT_CTLR_LE_ENC=n
CONFIG_BT_CTLR_LE_PING=n
CONFIG_BT_CTLR_DATA_LENGTH=n
CONFIG_BT_CTLR_PHY=n
CONFIG_BT_CTLR_CHAN_SEL_2=n
Bluetooth: controller: Add Minimum Number of Used Channels Proc Add implementation to support Bluetooth 5.0 Minimum Number of Used Channels Procedure. Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
2017-08-18 19:46:49 +08:00
CONFIG_BT_CTLR_MIN_USED_CHAN=n
Bluetooth: controller: Rename Kconfig prefix Rename the BT_CONTROLLER prefix used in all of the Kconfig variables related to the Bluetooth controller to BT_CTLR. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2017-08-14 19:45:13 +08:00
CONFIG_BT_CTLR_ADV_EXT=n
CONFIG_BT_CTLR_PRIVACY=n
Bluetooth: Kconfig: Rename CONFIG_BLUETOOTH_* to CONFIG_BT_* The API name space for Bluetooth is bt_* and BT_* so it makes sense to align the Kconfig name space with this. The additional benefit is that this also makes the names shorter. It is also in line with what Linux uses for Bluetooth Kconfig entries. Some Bluetooth-related Networking Kconfig defines are renamed as well in order to be consistent, such as NET_L2_BLUETOOTH. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-08-09 14:21:11 +08:00
CONFIG_BT_MESH=y
CONFIG_BT_MESH_RX_SDU_MAX=36
CONFIG_BT_MESH_RELAY=y
CONFIG_BT_MESH_MSG_CACHE_SIZE=2
#CONFIG_BT_MESH_LOW_POWER=y
#CONFIG_BT_MESH_SELF_TEST=y
#CONFIG_BT_MESH_IV_UPDATE_TEST=y
CONFIG_BT_MESH_SUBNET_COUNT=1
CONFIG_BT_MESH_APP_KEY_COUNT=1
CONFIG_BT_MESH_MODEL_GROUP_COUNT=1
CONFIG_BT_MESH_LABEL_COUNT=0
Bluetooth: Mesh: Add initial implementation Add an initial implementation for the Bluetooth Mesh Profile Specification. The main code resides in subsys/bluetooth/host/mesh and the public API can be found in include/bluetooth/mesh.h. There are a couple of samples provided as well under samples/bluetooth and tests/bluetooth. The implementation covers all layers of the Bluetooth Mesh stack and most optional features as well. The following is a list of some of these features and the c-files where the implementation can be found: - GATT & Advertising bearers (proxy.c & adv.c) - Network Layer (net.c) - Lower and Upper Transport Layers (transport.c) - Access Layer (access.c) - Foundation Models, Server role (health.c & cfg.c) - Both PB-ADV and PB-GATT based provisioning (prov.c) - Low Power Node support (lpn.c) - Relay support (net.c) - GATT Proxy (proxy.c) Notable features that are *not* part of the implementation: - Friend support (initial bits are in place in friend.c) - Provisioner support (low-value for typical Zephyr devices) - GATT Client (low-value for typical Zephyr devices) Jira: ZEP-2360 Change-Id: Ic773113dbfd84878ff8cee7fe2bb948f0ace19ed Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-06-16 17:30:54 +08:00
#CONFIG_UART_CONSOLE=n
Bluetooth: Kconfig: Rename CONFIG_BLUETOOTH_* to CONFIG_BT_* The API name space for Bluetooth is bt_* and BT_* so it makes sense to align the Kconfig name space with this. The additional benefit is that this also makes the names shorter. It is also in line with what Linux uses for Bluetooth Kconfig entries. Some Bluetooth-related Networking Kconfig defines are renamed as well in order to be consistent, such as NET_L2_BLUETOOTH. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-08-09 14:21:11 +08:00
#CONFIG_BT_DEBUG_MONITOR=y
#CONFIG_BT_DEBUG_LOG=y
#CONFIG_BT_MESH_DEBUG=y
#CONFIG_BT_MESH_DEBUG_NET=y
#CONFIG_BT_MESH_DEBUG_PROXY=y
#CONFIG_BT_MESH_DEBUG_TRANS=y
#CONFIG_BT_MESH_DEBUG_PROV=y
#CONFIG_BT_MESH_DEBUG_BEACON=y
#CONFIG_BT_MESH_DEBUG_CRYPTO=y
#CONFIG_BT_MESH_DEBUG_ADV=y
#CONFIG_BT_MESH_DEBUG_ACCESS=y