OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/soc/arm/st_stm32/stm32f7/soc.h

85 lines
1.6 KiB
C
Raw Normal View History

arch: arm: stm32: Basic STM32F7 family support The patch includes support for STM32F746xG subfamily. Related to issue #6981. Signed-off-by: Yurii Hamann <yurii@hamann.site>
2018-06-14 02:04:43 +08:00
/*
* Copyright (c) 2018 Yurii Hamann
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* @file SoC configuration macros for the ST STM32F7 family processors.
*
* Based on reference manual:
* RM0385 Reference manual STM32F75xxx and STM32F74xxx
* advanced ARM(r)-based 32-bit MCUs
*
* Chapter 2.2.2: Memory map and register boundary addresses
*/
#ifndef _STM32F7_SOC_H_
#define _STM32F7_SOC_H_
soc: arm: do not include kernel headers in soc.h We shall not include core kernel headers in soc.h header of ARM SoCs. We should try to only include the vendor headers and auto-generated board header from DTS. This commit implements this policy for the SoCs, whose builds have shown to fail due to header inclusion cycles. Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-09-25 03:42:10 +08:00
#include <sys/util.h>
arch: arm: stm32: Basic STM32F7 family support The patch includes support for STM32F746xG subfamily. Related to issue #6981. Signed-off-by: Yurii Hamann <yurii@hamann.site>
2018-06-14 02:04:43 +08:00
#ifndef _ASMLANGUAGE
#include <stm32f7xx.h>
soc: arm: do not include kernel headers in soc.h We shall not include core kernel headers in soc.h header of ARM SoCs. We should try to only include the vendor headers and auto-generated board header from DTS. This commit implements this policy for the SoCs, whose builds have shown to fail due to header inclusion cycles. Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-09-25 03:42:10 +08:00
/* Add include for DTS generated information */
dts: Rename generated_dts_board*.{h,conf} to devicetree*.{h,conf} generated_dts_board.h is pretty redundant and confusing as a name. Call it devicetree.h instead. dts.h would be another option, but DTS stands for "devicetree source" and is the source code format, so it's a bit confusing too. The replacement was done by grepping for 'generated_dts_board' and 'GENERATED_DTS_BOARD'. Two build diagram and input-output SVG files were updated as well, along with misc. documentation. hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml update. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-01-16 20:29:53 +08:00
#include <devicetree.h>
arch: arm: stm32f7: remove core zephyr header inclusions from soc.h The stm32f7 version of soc.h misses the changes done in commit aee97be7107b ("arch: arm: soc: remove core zephyr header inclusions from soc.h") as it was not merged at that time. Fix that. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2018-06-29 03:52:42 +08:00
drivers/interrupt_controller: stm32: Use LL API exti driver implementation does not fit all SoCs because some EXTI ip does not match stm32_exti register map provided. Instead of providing exti register map for all SoCs, use LL API which abstracts IP variations and enable uniform use of the drivers on all STM32SoCs. Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-01-30 04:09:04 +08:00
#ifdef CONFIG_EXTI_STM32
#include <stm32f7xx_ll_exti.h>
#endif
drivers: clock_control: STM32F7 family clock control This patch adds clock control support for STM32F7 family microcontrollers. Signed-off-by: Yurii Hamann <yurii@hamann.site>
2018-06-14 02:07:25 +08:00
#ifdef CONFIG_CLOCK_CONTROL_STM32_CUBE
#include <stm32f7xx_ll_utils.h>
#include <stm32f7xx_ll_bus.h>
#include <stm32f7xx_ll_rcc.h>
#include <stm32f7xx_ll_system.h>
#endif /* CONFIG_CLOCK_CONTROL_STM32_CUBE */
serial: stm32: STM32F7 UART support The patch adds serial driver support for STM32F7 family microcontrollers, includes pinmux definitions and DTS fixup file. Signed-off-by: Yurii Hamann <yurii@hamann.site>
2018-06-19 03:49:58 +08:00
#ifdef CONFIG_SERIAL_HAS_DRIVER
#include <stm32f7xx_ll_usart.h>
#endif
soc: stm32: replace use of Kconfig I2C by I2C_STM32 For LL header inclusion, use _STM32 Kconfig symbol (related to the driver), rather than generic symbol, that could theoretically use an alternate solution. Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-10-10 17:11:57 +08:00
#ifdef CONFIG_I2C_STM32
drivers: i2c: stm32: add support for STM32F7 The STM32F7 uses the V2 version of the STM32 I2C controller. Add the corresponding Kconfig, DTS, DTS fixup and pinmux entries. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2018-07-04 22:51:13 +08:00
#include <stm32f7xx_ll_i2c.h>
#endif
drivers: spi_ll_stm32: Enable SPI driver for F7 family Enables SPI driver for STM32F7 SoCs Signed-off-by: Christian Taedcke <hacking@taedcke.com>
2018-10-17 04:15:56 +08:00
#if defined(CONFIG_SPI_STM32) || defined(CONFIG_I2S_STM32)
#include <stm32f7xx_ll_spi.h>
#endif
drivers: entropy: stm32: add support for STM32F7 All the STM32F7 SoCs have a TRNG. Adding support for it is just a matter of tweaking the #ifdef and including the right file from HAL. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2018-07-02 00:15:15 +08:00
#ifdef CONFIG_ENTROPY_STM32_RNG
#include <stm32f7xx_ll_rng.h>
#endif
rtc: Remove old rtc functionality Remove the old rtc functionality as its been deprecated for 2 releases now. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-09-10 21:34:56 +08:00
#if defined(CONFIG_COUNTER_RTC_STM32)
drivers/rtc: Enable RTC driver for STM32F7 series Enable RTC driver for STM32F7 series. Signed-off-by: Christian Taedcke <hacking@taedcke.com>
2018-10-17 03:51:00 +08:00
#include <stm32f7xx_ll_rtc.h>
#include <stm32f7xx_ll_exti.h>
#include <stm32f7xx_ll_pwr.h>
#endif
soc: arm: st_stm32: Using LL library to implement gpio functions The original implementation of gpio functions access registers directly. Using LL library can add a set of unifying access functions for all series of stm32 for avoiding accessing low level code, and improve readability. Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
2019-01-08 18:12:04 +08:00
#ifdef CONFIG_GPIO_STM32
#include <stm32f7xx_ll_gpio.h>
#endif
soc: stm32: Extended watchdog support to all series STM32F2, STM32F7 and STM32L0 were missing wtachdog API support. Fix this. Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2019-02-01 20:43:08 +08:00
#ifdef CONFIG_IWDG_STM32
#include <stm32f7xx_ll_iwdg.h>
#endif
drivers: watchdog: stm32: Add implementation for WWDG Added drivers for System Window Watchdog of STM32 platform. Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
2019-07-15 21:07:00 +08:00
#ifdef CONFIG_WWDG_STM32
#include <stm32f7xx_ll_wwdg.h>
#endif
drivers: adc: add driver support for ADC1 of stm32 This commit adds driver support for ADC1 on all 8 supported series of stm32 with resolution and conversion time selection and calibration. Currently DMA is not supported for all series, and without it, zephyr won't be able to catch up ADC's end of conversion interrupt, so this version of the driver supports one channel conversion only. Users want multi-channel conversion should use multiple sequences in their app code. This driver uses LL lib rather than HAL because the current HAL lib for ADC will call HAL_DMA_* functions rather than using zephyr's common DMA interface, so that way the driver will break the consistency of the code. This driver has been tested on multiple nucleo boards including NUCLEO_F091RC/F103RB/F207ZG/F302R8/F401RE/F746ZG/L073RZ/L476RG and all passed the test cases in tests/drivers/adc/adc_api. If the external ADC line is floating, it may fail the tests since ADC may get 0V and the test cases think 0 is failing. Connect it to any voltage source between 0-3.3V will help passing the test cases. Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
2019-05-07 16:37:35 +08:00
#ifdef CONFIG_ADC_STM32
#include <stm32f7xx_ll_adc.h>
#endif
drivers: dma: add generic driver support for some series of stm32 This commit adds driver support for DMA on f0/f1/f2/f3/f4/l0/l4 series stm32. Notice due to some bugs, this is currently not working with f7. There are two kinds of IP blocks are used across these stm32, one is the one that has been used on F2/F4/F7 series, and the other one is the one that has been used on F0/F1/F3/L0/L4 series. Memory to memory transfer is only supported on the second DMA on F2/F4 with 'st,mem2mem' to be declared in dts. This driver depends on k_malloc to allocate memory for stream instances, so CONFIG_HEAP_MEM_POOL_SIZE must be big enough to hold them. Common parts of the driver are in dma_stm32.c and SoC related parts are implemented in dma_stm32_v*.c. This driver has been tested on multiple nucleo boards, including NUCLEO_F091RC/F103RB/F207ZG/F302R8/F401RE/L073RZ/L476RG with the loop_transfer and chan_blen_transfer test cases. Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
2019-10-24 19:06:19 +08:00
#ifdef CONFIG_DMA_STM32
#include <stm32f7xx_ll_dma.h>
#endif
arch: arm: stm32: Basic STM32F7 family support The patch includes support for STM32F746xG subfamily. Related to issue #6981. Signed-off-by: Yurii Hamann <yurii@hamann.site>
2018-06-14 02:04:43 +08:00
#endif /* !_ASMLANGUAGE */
#endif /* _STM32F7_SOC_H_ */