OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/drivers/flash/CMakeLists.txt

44 lines
1.5 KiB
CMake
Raw Normal View History

drivers: flash: Remove usage of zephyr_library_ifdef Phasing out the usage of this cmake macro from the drivers/flash folder. Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
2018-05-23 19:22:20 +08:00
zephyr_library()
drivers: Cmake: Add __ZEPHYR_SUPERVISOR__ macro for driver files. Normally a syscall would check the current privilege level and then decide to go to _impl_<syscall> directly or go through a _handler_<syscall>. __ZEPHYR_SUPERVISOR__ is a compiler optimization flag which will make all the system calls from the driver files directly link to the _impl_<syscall>. Thereby reducing the overhead of checking the privileges. In the previous implementation all the source files would be compiled by zephyr_source() rule. This means that zephyr_* is a catchall CMake library for source files that can be built purely with the include paths, defines, and other compiler flags that all zephyr source files uses. This states that adding one extra compiler flag for only one complete directory would fail. This limitation can be overcome by using zephyr_libray* APIs. This creates a library for the required directories and it also supports directory level properties. Hence we use zephyr_library* to create a new library with macro _ZEPHYR_SUPERVISOR_ for the optimization. Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
2018-03-28 18:06:12 +08:00
drivers: flash: add a generic spi nor flash driver This driver is inspired from the w25qxxdv SPI NOR flash driver which was already implementing the CFI (Common Flash Interface) for its purpose. To handle other NOR flash a flash id table (as Linux do) which contains the geometry for a few SPI NOR flash based on their JEDEC ID has been introduced. We currently support the following flash: - W25Q80 - W25Q16 - W25Q32 - S25FL216K - MX25UM512 The read and write functions are able to handle more then one page at a time and return the number of bytes read or write. Also because every NOR flash expect to disable the write protection before writing or erasing, the write enable command is now part of the write and erase functions. Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
2018-11-12 23:36:24 +08:00
zephyr_library_sources_ifdef(CONFIG_SPI_NOR spi_nor.c)
drivers: Cmake: Add __ZEPHYR_SUPERVISOR__ macro for driver files. Normally a syscall would check the current privilege level and then decide to go to _impl_<syscall> directly or go through a _handler_<syscall>. __ZEPHYR_SUPERVISOR__ is a compiler optimization flag which will make all the system calls from the driver files directly link to the _impl_<syscall>. Thereby reducing the overhead of checking the privileges. In the previous implementation all the source files would be compiled by zephyr_source() rule. This means that zephyr_* is a catchall CMake library for source files that can be built purely with the include paths, defines, and other compiler flags that all zephyr source files uses. This states that adding one extra compiler flag for only one complete directory would fail. This limitation can be overcome by using zephyr_libray* APIs. This creates a library for the required directories and it also supports directory level properties. Hence we use zephyr_library* to create a new library with macro _ZEPHYR_SUPERVISOR_ for the optimization. Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
2018-03-28 18:06:12 +08:00
zephyr_library_sources_ifdef(CONFIG_SPI_FLASH_W25QXXDV spi_flash_w25qxxdv.c)
zephyr_library_sources_ifdef(CONFIG_SOC_FLASH_QMSI soc_flash_qmsi.c)
zephyr_library_sources_ifdef(CONFIG_SOC_FLASH_NRF soc_flash_nrf.c)
zephyr_library_sources_ifdef(CONFIG_SOC_FLASH_MCUX soc_flash_mcux.c)
zephyr_library_sources_ifdef(CONFIG_FLASH_PAGE_LAYOUT flash_page_layout.c)
zephyr_library_sources_ifdef(CONFIG_USERSPACE flash_handlers.c)
zephyr_library_sources_ifdef(CONFIG_SOC_FLASH_SAM0 flash_sam0.c)
drivers: flash: add flash driver support for Atmel SAM E70 This patch adds a flash driver for the Atmel SAM E70 SoC. The driver has been kept simple by considering that the flash is only composed of 8-KiB blocks. Indeed an area at the beginning of the flash might be erased with a smaller granularity, and the other blocks can also be erased with a higher granularity. It also only handles the global read/write protection, not the 128-KiB lock regions. A write error is returned if a region is locked. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2018-11-05 04:41:22 +08:00
zephyr_library_sources_ifdef(CONFIG_SOC_FLASH_SAM flash_sam.c)
drivers: Cmake: Add __ZEPHYR_SUPERVISOR__ macro for driver files. Normally a syscall would check the current privilege level and then decide to go to _impl_<syscall> directly or go through a _handler_<syscall>. __ZEPHYR_SUPERVISOR__ is a compiler optimization flag which will make all the system calls from the driver files directly link to the _impl_<syscall>. Thereby reducing the overhead of checking the privileges. In the previous implementation all the source files would be compiled by zephyr_source() rule. This means that zephyr_* is a catchall CMake library for source files that can be built purely with the include paths, defines, and other compiler flags that all zephyr source files uses. This states that adding one extra compiler flag for only one complete directory would fail. This limitation can be overcome by using zephyr_libray* APIs. This creates a library for the required directories and it also supports directory level properties. Hence we use zephyr_library* to create a new library with macro _ZEPHYR_SUPERVISOR_ for the optimization. Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
2018-03-28 18:06:12 +08:00
zephyr_library_sources_ifdef(CONFIG_SOC_FLASH_NIOS2_QSPI soc_flash_nios2_qspi.c)
drivers: flash_gecko: Add flash driver for SiLabs Gecko SoCs Tested with SLWSTK6061A / BRD4250B wireless starter kit. Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2018-08-07 20:11:45 +08:00
zephyr_library_sources_ifdef(CONFIG_SOC_FLASH_GECKO flash_gecko.c)
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
flash: stm32: add support for STM32F0 flash controller Add the STM32F0 Embedded Flash support in the flash_stm32 driver interface. The STM32F0 has a particularity or use the HSI as clock source for the flash controller interface, so this clock must be enabled directly in the case HSE or another clock is used by the system clock. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-12-04 21:09:59 +08:00
if(CONFIG_SOC_SERIES_STM32F0X)
drivers: Cmake: Add __ZEPHYR_SUPERVISOR__ macro for driver files. Normally a syscall would check the current privilege level and then decide to go to _impl_<syscall> directly or go through a _handler_<syscall>. __ZEPHYR_SUPERVISOR__ is a compiler optimization flag which will make all the system calls from the driver files directly link to the _impl_<syscall>. Thereby reducing the overhead of checking the privileges. In the previous implementation all the source files would be compiled by zephyr_source() rule. This means that zephyr_* is a catchall CMake library for source files that can be built purely with the include paths, defines, and other compiler flags that all zephyr source files uses. This states that adding one extra compiler flag for only one complete directory would fail. This limitation can be overcome by using zephyr_libray* APIs. This creates a library for the required directories and it also supports directory level properties. Hence we use zephyr_library* to create a new library with macro _ZEPHYR_SUPERVISOR_ for the optimization. Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
2018-03-28 18:06:12 +08:00
zephyr_library_sources_ifdef(CONFIG_SOC_FLASH_STM32
flash: stm32: add support for STM32F0 flash controller Add the STM32F0 Embedded Flash support in the flash_stm32 driver interface. The STM32F0 has a particularity or use the HSI as clock source for the flash controller interface, so this clock must be enabled directly in the case HSE or another clock is used by the system clock. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-12-04 21:09:59 +08:00
flash_stm32.c
flash_stm32f0x.c
)
endif()
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
if(CONFIG_SOC_SERIES_STM32F3X)
drivers: Cmake: Add __ZEPHYR_SUPERVISOR__ macro for driver files. Normally a syscall would check the current privilege level and then decide to go to _impl_<syscall> directly or go through a _handler_<syscall>. __ZEPHYR_SUPERVISOR__ is a compiler optimization flag which will make all the system calls from the driver files directly link to the _impl_<syscall>. Thereby reducing the overhead of checking the privileges. In the previous implementation all the source files would be compiled by zephyr_source() rule. This means that zephyr_* is a catchall CMake library for source files that can be built purely with the include paths, defines, and other compiler flags that all zephyr source files uses. This states that adding one extra compiler flag for only one complete directory would fail. This limitation can be overcome by using zephyr_libray* APIs. This creates a library for the required directories and it also supports directory level properties. Hence we use zephyr_library* to create a new library with macro _ZEPHYR_SUPERVISOR_ for the optimization. Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
2018-03-28 18:06:12 +08:00
zephyr_library_sources_ifdef(CONFIG_SOC_FLASH_STM32 flash_stm32f3x.c)
zephyr_library_sources_ifdef(CONFIG_SOC_FLASH_STM32 flash_stm32f3x_priv.c)
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
endif()
if(CONFIG_SOC_SERIES_STM32F4X)
drivers: Cmake: Add __ZEPHYR_SUPERVISOR__ macro for driver files. Normally a syscall would check the current privilege level and then decide to go to _impl_<syscall> directly or go through a _handler_<syscall>. __ZEPHYR_SUPERVISOR__ is a compiler optimization flag which will make all the system calls from the driver files directly link to the _impl_<syscall>. Thereby reducing the overhead of checking the privileges. In the previous implementation all the source files would be compiled by zephyr_source() rule. This means that zephyr_* is a catchall CMake library for source files that can be built purely with the include paths, defines, and other compiler flags that all zephyr source files uses. This states that adding one extra compiler flag for only one complete directory would fail. This limitation can be overcome by using zephyr_libray* APIs. This creates a library for the required directories and it also supports directory level properties. Hence we use zephyr_library* to create a new library with macro _ZEPHYR_SUPERVISOR_ for the optimization. Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
2018-03-28 18:06:12 +08:00
zephyr_library_sources_ifdef(CONFIG_SOC_FLASH_STM32
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
flash_stm32.c
flash_stm32f4x.c
)
endif()
if(CONFIG_SOC_SERIES_STM32L4X)
drivers: Cmake: Add __ZEPHYR_SUPERVISOR__ macro for driver files. Normally a syscall would check the current privilege level and then decide to go to _impl_<syscall> directly or go through a _handler_<syscall>. __ZEPHYR_SUPERVISOR__ is a compiler optimization flag which will make all the system calls from the driver files directly link to the _impl_<syscall>. Thereby reducing the overhead of checking the privileges. In the previous implementation all the source files would be compiled by zephyr_source() rule. This means that zephyr_* is a catchall CMake library for source files that can be built purely with the include paths, defines, and other compiler flags that all zephyr source files uses. This states that adding one extra compiler flag for only one complete directory would fail. This limitation can be overcome by using zephyr_libray* APIs. This creates a library for the required directories and it also supports directory level properties. Hence we use zephyr_library* to create a new library with macro _ZEPHYR_SUPERVISOR_ for the optimization. Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
2018-03-28 18:06:12 +08:00
zephyr_library_sources_ifdef(CONFIG_SOC_FLASH_STM32
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
flash_stm32.c
flash_stm32l4x.c
)
endif()
flash: make flash shell generic This shell command was tied to bluetooth and the bluetooth shell and also had messages all related to nordic ICs. Make it generic and put it under drivers/flash/ so it can be included by anyone and independently of bluetooth. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-10-19 01:15:46 +08:00
zephyr_library_sources_ifdef(CONFIG_FLASH_SHELL flash_shell.c)
drivers: flash: nrf: Rename nrf5 to nrf With upcoming ICs that are not in the nRF5x family, rename the flash driver and all its dependencies from nrf5 to nrf. Should also fix the issue introduced by f49150cab686ae3 which broke the assignment of the flash device due to a partial rename. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2018-03-21 01:41:39 +08:00
zephyr_include_directories_ifdef(CONFIG_SOC_FLASH_NRF_RADIO_SYNC ${ZEPHYR_BASE}/subsys/bluetooth)