OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/samples/net/mbedtls_dtlsclient/prj_arduino_101.conf

33 lines
721 B
Plaintext
Raw Normal View History

samples/mbedtls_dtlsclient: mbedTLS sample DTLS client app on Arduino 101. This is a sample app using ECJPAKE crypto algorithm on DTLS, using mbedTLS, native IP stack and the enc28j60 SPI Ethernet Driver Change-Id: I658c3d9a54cfdd164a4147903125400f223c6e0a Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
2016-11-02 08:26:36 +08:00
CONFIG_SYS_LOG=y
CONFIG_NET_LOG=y
CONFIG_INIT_STACKS=y
CONFIG_MAIN_STACK_SIZE=4096
CONFIG_TEST_RANDOM_GENERATOR=y
CONFIG_NETWORKING=y
CONFIG_NET_ARP=y
CONFIG_NET_L2_ETHERNET=y
CONFIG_NET_IPV4=y
CONFIG_NET_IPV6=n
CONFIG_NET_BUF=y
CONFIG_NET_IFACE_UNICAST_IPV4_ADDR_COUNT=3
CONFIG_NET_NBUF_RX_COUNT=2
CONFIG_NET_NBUF_TX_COUNT=3
CONFIG_NET_NBUF_DATA_COUNT=12
CONFIG_ETH_ENC28J60=y
CONFIG_ETH_ENC28J60_0=y
CONFIG_ETH_ENC28J60_0_SPI_PORT_NAME="SPI_1"
samples: net: mbedtls: Let's enable fastest enc28j60 speed on a101 enc28j60 can work up to 25Mhz, let's set a divider of 2 on the 32Mhz host clock then. This require to mimic CS with a gpio in the SPI driver. Change-Id: I98f84fa793a614cdbb566be39a262ff825101255 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2016-12-06 22:27:09 +08:00
CONFIG_ETH_ENC28J60_0_SPI_BUS_FREQ=2
samples/mbedtls_dtlsclient: mbedTLS sample DTLS client app on Arduino 101. This is a sample app using ECJPAKE crypto algorithm on DTLS, using mbedTLS, native IP stack and the enc28j60 SPI Ethernet Driver Change-Id: I658c3d9a54cfdd164a4147903125400f223c6e0a Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
2016-11-02 08:26:36 +08:00
CONFIG_ETH_ENC28J60_0_MAC3=0x2D
CONFIG_ETH_ENC28J60_0_MAC4=0x30
CONFIG_ETH_ENC28J60_0_MAC5=0x32
CONFIG_SPI=y
samples: net: mbedtls: Let's enable fastest enc28j60 speed on a101 enc28j60 can work up to 25Mhz, let's set a divider of 2 on the 32Mhz host clock then. This require to mimic CS with a gpio in the SPI driver. Change-Id: I98f84fa793a614cdbb566be39a262ff825101255 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2016-12-06 22:27:09 +08:00
CONFIG_SPI_CS_GPIO=y
CONFIG_SPI_1_CS_GPIO_PORT="GPIO_0"
CONFIG_SPI_1_CS_GPIO_PIN=0
samples/mbedtls_dtlsclient: mbedTLS sample DTLS client app on Arduino 101. This is a sample app using ECJPAKE crypto algorithm on DTLS, using mbedTLS, native IP stack and the enc28j60 SPI Ethernet Driver Change-Id: I658c3d9a54cfdd164a4147903125400f223c6e0a Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
2016-11-02 08:26:36 +08:00
CONFIG_MBEDTLS=y
CONFIG_MBEDTLS_BUILTIN=y