OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/drivers/modem/Kconfig.ublox-sara-r4

124 lines
3.5 KiB
Plaintext
Raw Normal View History

kconfig: Clean up header comments and make them consistent Use this short header style in all Kconfig files: # <description> # <copyright> # <license> ... Also change all <description>s from # Kconfig[.extension] - Foo-related options to just # Foo-related options It's clear enough that it's about Kconfig. The <description> cleanup was done with this command, along with some manual cleanup (big letter at the start, etc.) git ls-files '*Kconfig*' | \ xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /' Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-11-01 20:45:29 +08:00
# u-blox SARA R4 driver options
drivers: modem: introduce u-blox SARA-R4 modem driver The u-blox SARA-R4 modem modules are Ultra-compact LTE Cat M1 / NB1 ready: - Configurable with a single hardware version - Flexible mode selection as LTE Cat M1, LTE Cat NB1, EGPRS - only/preferred - Low power consumption and longer battery life - Extended range in buildings, basements, and with NB1, underground This driver introduces support for basic AT commands to query modem information as well as socket connection for TCP/UDP communication. Signed-off-by: Michael Scott <mike@foundries.io>
2019-05-18 01:14:00 +08:00
# Copyright (c) 2019 Foundries.io
# SPDX-License-Identifier: Apache-2.0
drivers: modem: ublox-sara-r4: Support SARA-U2 modems, sense VINT This adds support for SARA-U2 modems. They have different timings on the PWR_ON pin, don't support AT+CESQ and require a manual GPRS connection setup. The VINT pin is used as a more reliable and faster way to power on the modem. Based on work by Göran Weinholt <goran.weinholt@endian.se> Signed-off-by: Michael Scott <mike@foundries.io>
2019-08-07 23:06:00 +08:00
config MODEM_UBLOX_SARA
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 19:05:12 +08:00
bool "U-blox SARA modem driver"
drivers: modem: ublox SARA convert to modem context Let's convert the SARA modem to use the more generic modem context layers so that we don't maintain a lot of what should be shared code. This conversion includes: - modem context as the helper umbrella - uart modem interface layer - generic command handler layer - modem socket helper - move from net_context offload API to socket offload API Signed-off-by: Michael Scott <mike@foundries.io>
2019-08-07 23:05:00 +08:00
select MODEM_CONTEXT
select MODEM_CMD_HANDLER
select MODEM_IFACE_UART
select MODEM_SOCKET
drivers: modem: introduce u-blox SARA-R4 modem driver The u-blox SARA-R4 modem modules are Ultra-compact LTE Cat M1 / NB1 ready: - Configurable with a single hardware version - Flexible mode selection as LTE Cat M1, LTE Cat NB1, EGPRS - only/preferred - Low power consumption and longer battery life - Extended range in buildings, basements, and with NB1, underground This driver introduces support for basic AT commands to query modem information as well as socket connection for TCP/UDP communication. Signed-off-by: Michael Scott <mike@foundries.io>
2019-05-18 01:14:00 +08:00
select NET_OFFLOAD
drivers: modem: ublox SARA convert to modem context Let's convert the SARA modem to use the more generic modem context layers so that we don't maintain a lot of what should be shared code. This conversion includes: - modem context as the helper umbrella - uart modem interface layer - generic command handler layer - modem socket helper - move from net_context offload API to socket offload API Signed-off-by: Michael Scott <mike@foundries.io>
2019-08-07 23:05:00 +08:00
select NET_SOCKETS_OFFLOAD
drivers: modem: introduce u-blox SARA-R4 modem driver The u-blox SARA-R4 modem modules are Ultra-compact LTE Cat M1 / NB1 ready: - Configurable with a single hardware version - Flexible mode selection as LTE Cat M1, LTE Cat NB1, EGPRS - only/preferred - Low power consumption and longer battery life - Extended range in buildings, basements, and with NB1, underground This driver introduces support for basic AT commands to query modem information as well as socket connection for TCP/UDP communication. Signed-off-by: Michael Scott <mike@foundries.io>
2019-05-18 01:14:00 +08:00
help
Choose this setting to enable u-blox SARA-R4 LTE-CatM1/NB-IoT modem
driver.
drivers: modem: ublox-sara-r4: Support SARA-U2 modems, sense VINT This adds support for SARA-U2 modems. They have different timings on the PWR_ON pin, don't support AT+CESQ and require a manual GPRS connection setup. The VINT pin is used as a more reliable and faster way to power on the modem. Based on work by Göran Weinholt <goran.weinholt@endian.se> Signed-off-by: Michael Scott <mike@foundries.io>
2019-08-07 23:06:00 +08:00
if MODEM_UBLOX_SARA
choice MODEM_UBLOX_SARA_VARIANT
bool "u-blox SARA variant selection"
default MODEM_UBLOX_SARA_R4
config MODEM_UBLOX_SARA_R4
bool "u-blox SARA-R4"
help
Enable support for SARA-R4 modem
config MODEM_UBLOX_SARA_U2
bool "u-blox SARA-U2"
help
Enable support for SARA-U2 modem
drivers: modem: ublox-sara-r4: automatic detection of modem type The modem type (Sara R410 or Sara U201) is detected automatically after hardware initialisation of the modem. Further initialisation and functionality is then chosen depending on the detected modem type. To enable this functionality, set following bool in Kconfig: MODEM_UBLOX_SARA_AUTODETECT_VARIANT Signed-off-by: Hans Wilmers <hans@wilmers.no>
2020-04-23 19:57:33 +08:00
config MODEM_UBLOX_SARA_AUTODETECT_VARIANT
bool "detect automatically"
help
Enable automatic detection of modem variant (SARA-R4 or SARA-U2)
drivers: modem: ublox-sara-r4: Support SARA-U2 modems, sense VINT This adds support for SARA-U2 modems. They have different timings on the PWR_ON pin, don't support AT+CESQ and require a manual GPRS connection setup. The VINT pin is used as a more reliable and faster way to power on the modem. Based on work by Göran Weinholt <goran.weinholt@endian.se> Signed-off-by: Michael Scott <mike@foundries.io>
2019-08-07 23:06:00 +08:00
endchoice
drivers: modem: introduce u-blox SARA-R4 modem driver The u-blox SARA-R4 modem modules are Ultra-compact LTE Cat M1 / NB1 ready: - Configurable with a single hardware version - Flexible mode selection as LTE Cat M1, LTE Cat NB1, EGPRS - only/preferred - Low power consumption and longer battery life - Extended range in buildings, basements, and with NB1, underground This driver introduces support for basic AT commands to query modem information as well as socket connection for TCP/UDP communication. Signed-off-by: Michael Scott <mike@foundries.io>
2019-05-18 01:14:00 +08:00
config MODEM_UBLOX_SARA_R4_RX_STACK_SIZE
int "Stack size for the u-blox SARA-R4 modem driver RX thread"
default 1028
help
This stack is used by the u-blox SARA-R4 RX thread.
config MODEM_UBLOX_SARA_R4_RX_WORKQ_STACK_SIZE
int "Stack size for the u-blox SARA-R4 modem driver work queue"
default 2048
help
This stack is used by the work queue to pass off net_pkt data
to the rest of the network stack, letting the rx thread continue
processing data.
config MODEM_UBLOX_SARA_R4_APN
string "APN for establishing network connection"
default "hologram"
help
This setting is used in the AT+CGDCONT command to set the APN name
for the network connection context. This value is specific to
the network provider and may need to be changed.
drivers: modem: ublox-sara-r4: automatic setting of APN During communication initialisation, the IMSI of the inserted SIM card is evaluated to determine the APN. This is done by comparing the first 5 characters of the IMSI to a list of known providers. The list can be given in Kconfig. To enable this functionality, set following bool in Kconfig: MODEM_UBLOX_SARA_AUTODETECT_APN To set a list of providers, set following string: MODEM_UBLOX_SARA_AUTODETECT_APN_PROFILES If the provider can not be found in the list, the APN given in following entry is used as a fallback: MODEM_UBLOX_SARA_R4_APN Signed-off-by: Hans Wilmers <hans@wilmers.no>
2020-04-23 20:07:55 +08:00
config MODEM_UBLOX_SARA_AUTODETECT_APN
bool "detect APN automatically"
help
Enable automatic detection of the APN, based on the IMSI
If the detection fails, the configured APN will be used
config MODEM_UBLOX_SARA_AUTODETECT_APN_PROFILES
string "list of profiles to search when autodetecting APN"
default "hologram=23450, wm=20601 29505 29509 23450 53703 90143"
help
Set a comma separated list of profiles, each containing of:
<apn>=<IMSI_1> ... <IMSI_n>
drivers: modem: introduce u-blox SARA-R4 modem driver The u-blox SARA-R4 modem modules are Ultra-compact LTE Cat M1 / NB1 ready: - Configurable with a single hardware version - Flexible mode selection as LTE Cat M1, LTE Cat NB1, EGPRS - only/preferred - Low power consumption and longer battery life - Extended range in buildings, basements, and with NB1, underground This driver introduces support for basic AT commands to query modem information as well as socket connection for TCP/UDP communication. Signed-off-by: Michael Scott <mike@foundries.io>
2019-05-18 01:14:00 +08:00
config MODEM_UBLOX_SARA_R4_MANUAL_MCCMNO
string "MCC/MNOfor establishing network connection"
help
This setting is used in the AT+COPS command to set the MCC/MNO
for the network connection context. This value is specific to
the network provider and may need to be changed if auto is not
selected.
config MODEM_UBLOX_SARA_R4_INIT_PRIORITY
int "u-blox SARA-R4 driver init priority"
default 80
help
u-blox SARA-R4 device driver initialization priority.
Do not mess with it unless you know what you are doing.
Note that the priority needs to be lower than the net stack
so that it can start before the networking sub-system.
drivers: modem: sara-r4: support for network indication on SARA modems The u-blox SARA modems have the ability to output the network status on a GPIO pin. This can be used to light up a LED when the modem is connected to the network. Signed-off-by: Göran Weinholt <goran.weinholt@endian.se>
2020-01-13 17:53:36 +08:00
config MODEM_UBLOX_SARA_R4_NET_STATUS
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 19:05:12 +08:00
bool "Support for network status indication"
drivers: modem: sara-r4: support for network indication on SARA modems The u-blox SARA modems have the ability to output the network status on a GPIO pin. This can be used to light up a LED when the modem is connected to the network. Signed-off-by: Göran Weinholt <goran.weinholt@endian.se>
2020-01-13 17:53:36 +08:00
help
Choose this setting to use a modem GPIO pin as network indication.
if MODEM_UBLOX_SARA_R4_NET_STATUS
config MODEM_UBLOX_SARA_R4_NET_STATUS_PIN
int "Network status indication GPIO ID"
default 16
help
This setting is used to configure one of the modem's GPIO pins
as a network status indication. See the manual for the gpio ids
and how they map to pin numbers.
endif # MODEM_UBLOX_SARA_R4_NET_STATUS
drivers: modem: sara-r4: Add Kconfig to configure RSSI work This comit introduce two new Kconfig which allow to configure RSSI polling work. One Kconfig allow to completely disable the polling. The other one allow to sonfigure the polling period. Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
2020-11-10 00:21:49 +08:00
config MODEM_UBLOX_SARA_RSSI_WORK
kconfig: remove Enable from boolean prompts According to Kconfig guidelines, boolean prompts must not start with "Enable...". The following command has been used to automate the changes in this patch: sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig* Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 19:05:12 +08:00
bool "RSSI polling work"
drivers: modem: sara-r4: Add Kconfig to configure RSSI work This comit introduce two new Kconfig which allow to configure RSSI polling work. One Kconfig allow to completely disable the polling. The other one allow to sonfigure the polling period. Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
2020-11-10 00:21:49 +08:00
default y
help
u-blox SARA-R4 device is configured to poll for RSSI
config MODEM_UBLOX_SARA_RSSI_WORK_PERIOD
int "Configure RSSI WORK polling frequency"
depends on MODEM_UBLOX_SARA_RSSI_WORK
default 30
help
This settings is used to configure the period of RSSI polling
drivers: modem: ublox-sara-r4: Support SARA-U2 modems, sense VINT This adds support for SARA-U2 modems. They have different timings on the PWR_ON pin, don't support AT+CESQ and require a manual GPRS connection setup. The VINT pin is used as a more reliable and faster way to power on the modem. Based on work by Göran Weinholt <goran.weinholt@endian.se> Signed-off-by: Michael Scott <mike@foundries.io>
2019-08-07 23:06:00 +08:00
endif # MODEM_UBLOX_SARA