snippets: initial snippet.yml support
Add a new script, snippets.py, which is responsible for searching
SNIPPET_ROOT for snippet definitions, validating them, and informing
the build system about what needs doing as a result.
Use this script in snippets.cmake to:
- validate any discovered snippet.yml files
- error out on undefined snippets
- add a 'snippets' build system target that prints all snippet
names (analogous to 'boards' and 'shields' targets)
- handle any specific build system settings properly,
by include()-ing a file it generates
With this patch, you can define or extend a snippet in a snippet.yml
file anywhere underneath a directory in SNIPPET_ROOT. The snippet.yml
file format has a schema whose initial definition is in a new file,
snippet-schema.yml.
This initial snippet.yml file format supports adding .overlay and
.conf files, like this:
name: foo
append:
DTC_OVERLAY_FILE: foo.overlay
OVERLAY_CONFIG: foo.conf
boards:
myboard:
append:
DTC_OVERLAY_FILE: myboard.overlay
OVERLAY_CONFIG: myboard.conf
/my-regular-expression-over-board-names/:
append:
DTC_OVERLAY_FILE: myregexp.overlay
OVERLAY_CONFIG: myregexp.conf
(Note that since the snippet feature is intended to be extensible, the
same snippet name may appear in multiple files throughout any
directory in SNIPPET_ROOT, with each addition augmenting prior ones.)
This initial syntax aligns with the following snippet design goals:
- extensible: you can add board-specific support for an existing
snippet in another module
- able to combine multiple types of configuration: we can now apply a
.overlay and .conf at the same time
- specializable: this allows you to define settings that only apply
to a selectable set of boards (including with regular expression
support for matching against multiple similar boards that follow
a naming convention)
- DRY: you can use regular expressions to apply the same snippet
settings to multiple boards like this: /(board1|board2|...)/
This patch is not trying to design and implement everything up front.
Additional features can and will be added to the snippet.yml format
over time; using YAML as a format allows us to make
backwards-compatible extensions as needed.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
2023-01-08 07:27:07 +08:00
|
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
#
|
|
|
|
# Copyright (c) 2022, Nordic Semiconductor ASA
|
|
|
|
|
|
|
|
# A pykwalify schema for basic validation of the snippet.yml format.
|
|
|
|
|
|
|
|
schema;append-schema:
|
|
|
|
# Sub-schema for appending onto CMake list variables.
|
|
|
|
# See uses under 'append:' keys below.
|
|
|
|
type: map
|
|
|
|
mapping:
|
2023-05-24 18:34:34 +08:00
|
|
|
EXTRA_DTC_OVERLAY_FILE:
|
snippets: initial snippet.yml support
Add a new script, snippets.py, which is responsible for searching
SNIPPET_ROOT for snippet definitions, validating them, and informing
the build system about what needs doing as a result.
Use this script in snippets.cmake to:
- validate any discovered snippet.yml files
- error out on undefined snippets
- add a 'snippets' build system target that prints all snippet
names (analogous to 'boards' and 'shields' targets)
- handle any specific build system settings properly,
by include()-ing a file it generates
With this patch, you can define or extend a snippet in a snippet.yml
file anywhere underneath a directory in SNIPPET_ROOT. The snippet.yml
file format has a schema whose initial definition is in a new file,
snippet-schema.yml.
This initial snippet.yml file format supports adding .overlay and
.conf files, like this:
name: foo
append:
DTC_OVERLAY_FILE: foo.overlay
OVERLAY_CONFIG: foo.conf
boards:
myboard:
append:
DTC_OVERLAY_FILE: myboard.overlay
OVERLAY_CONFIG: myboard.conf
/my-regular-expression-over-board-names/:
append:
DTC_OVERLAY_FILE: myregexp.overlay
OVERLAY_CONFIG: myregexp.conf
(Note that since the snippet feature is intended to be extensible, the
same snippet name may appear in multiple files throughout any
directory in SNIPPET_ROOT, with each addition augmenting prior ones.)
This initial syntax aligns with the following snippet design goals:
- extensible: you can add board-specific support for an existing
snippet in another module
- able to combine multiple types of configuration: we can now apply a
.overlay and .conf at the same time
- specializable: this allows you to define settings that only apply
to a selectable set of boards (including with regular expression
support for matching against multiple similar boards that follow
a naming convention)
- DRY: you can use regular expressions to apply the same snippet
settings to multiple boards like this: /(board1|board2|...)/
This patch is not trying to design and implement everything up front.
Additional features can and will be added to the snippet.yml format
over time; using YAML as a format allows us to make
backwards-compatible extensions as needed.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
2023-01-08 07:27:07 +08:00
|
|
|
type: str
|
2023-05-24 18:34:34 +08:00
|
|
|
EXTRA_CONF_FILE:
|
snippets: initial snippet.yml support
Add a new script, snippets.py, which is responsible for searching
SNIPPET_ROOT for snippet definitions, validating them, and informing
the build system about what needs doing as a result.
Use this script in snippets.cmake to:
- validate any discovered snippet.yml files
- error out on undefined snippets
- add a 'snippets' build system target that prints all snippet
names (analogous to 'boards' and 'shields' targets)
- handle any specific build system settings properly,
by include()-ing a file it generates
With this patch, you can define or extend a snippet in a snippet.yml
file anywhere underneath a directory in SNIPPET_ROOT. The snippet.yml
file format has a schema whose initial definition is in a new file,
snippet-schema.yml.
This initial snippet.yml file format supports adding .overlay and
.conf files, like this:
name: foo
append:
DTC_OVERLAY_FILE: foo.overlay
OVERLAY_CONFIG: foo.conf
boards:
myboard:
append:
DTC_OVERLAY_FILE: myboard.overlay
OVERLAY_CONFIG: myboard.conf
/my-regular-expression-over-board-names/:
append:
DTC_OVERLAY_FILE: myregexp.overlay
OVERLAY_CONFIG: myregexp.conf
(Note that since the snippet feature is intended to be extensible, the
same snippet name may appear in multiple files throughout any
directory in SNIPPET_ROOT, with each addition augmenting prior ones.)
This initial syntax aligns with the following snippet design goals:
- extensible: you can add board-specific support for an existing
snippet in another module
- able to combine multiple types of configuration: we can now apply a
.overlay and .conf at the same time
- specializable: this allows you to define settings that only apply
to a selectable set of boards (including with regular expression
support for matching against multiple similar boards that follow
a naming convention)
- DRY: you can use regular expressions to apply the same snippet
settings to multiple boards like this: /(board1|board2|...)/
This patch is not trying to design and implement everything up front.
Additional features can and will be added to the snippet.yml format
over time; using YAML as a format allows us to make
backwards-compatible extensions as needed.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
2023-01-08 07:27:07 +08:00
|
|
|
type: str
|
2023-07-08 18:28:37 +08:00
|
|
|
DTS_EXTRA_CPPFLAGS:
|
|
|
|
type: str
|
snippets: initial snippet.yml support
Add a new script, snippets.py, which is responsible for searching
SNIPPET_ROOT for snippet definitions, validating them, and informing
the build system about what needs doing as a result.
Use this script in snippets.cmake to:
- validate any discovered snippet.yml files
- error out on undefined snippets
- add a 'snippets' build system target that prints all snippet
names (analogous to 'boards' and 'shields' targets)
- handle any specific build system settings properly,
by include()-ing a file it generates
With this patch, you can define or extend a snippet in a snippet.yml
file anywhere underneath a directory in SNIPPET_ROOT. The snippet.yml
file format has a schema whose initial definition is in a new file,
snippet-schema.yml.
This initial snippet.yml file format supports adding .overlay and
.conf files, like this:
name: foo
append:
DTC_OVERLAY_FILE: foo.overlay
OVERLAY_CONFIG: foo.conf
boards:
myboard:
append:
DTC_OVERLAY_FILE: myboard.overlay
OVERLAY_CONFIG: myboard.conf
/my-regular-expression-over-board-names/:
append:
DTC_OVERLAY_FILE: myregexp.overlay
OVERLAY_CONFIG: myregexp.conf
(Note that since the snippet feature is intended to be extensible, the
same snippet name may appear in multiple files throughout any
directory in SNIPPET_ROOT, with each addition augmenting prior ones.)
This initial syntax aligns with the following snippet design goals:
- extensible: you can add board-specific support for an existing
snippet in another module
- able to combine multiple types of configuration: we can now apply a
.overlay and .conf at the same time
- specializable: this allows you to define settings that only apply
to a selectable set of boards (including with regular expression
support for matching against multiple similar boards that follow
a naming convention)
- DRY: you can use regular expressions to apply the same snippet
settings to multiple boards like this: /(board1|board2|...)/
This patch is not trying to design and implement everything up front.
Additional features can and will be added to the snippet.yml format
over time; using YAML as a format allows us to make
backwards-compatible extensions as needed.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
2023-01-08 07:27:07 +08:00
|
|
|
|
|
|
|
type: map
|
|
|
|
mapping:
|
|
|
|
name:
|
|
|
|
required: true
|
|
|
|
type: str
|
|
|
|
append:
|
|
|
|
example: |
|
|
|
|
Snippet-wide appending can be done here:
|
|
|
|
|
|
|
|
name: foo
|
|
|
|
append:
|
2023-08-09 03:44:30 +08:00
|
|
|
EXTRA_DTC_OVERLAY_FILE: m3.overlay
|
snippets: initial snippet.yml support
Add a new script, snippets.py, which is responsible for searching
SNIPPET_ROOT for snippet definitions, validating them, and informing
the build system about what needs doing as a result.
Use this script in snippets.cmake to:
- validate any discovered snippet.yml files
- error out on undefined snippets
- add a 'snippets' build system target that prints all snippet
names (analogous to 'boards' and 'shields' targets)
- handle any specific build system settings properly,
by include()-ing a file it generates
With this patch, you can define or extend a snippet in a snippet.yml
file anywhere underneath a directory in SNIPPET_ROOT. The snippet.yml
file format has a schema whose initial definition is in a new file,
snippet-schema.yml.
This initial snippet.yml file format supports adding .overlay and
.conf files, like this:
name: foo
append:
DTC_OVERLAY_FILE: foo.overlay
OVERLAY_CONFIG: foo.conf
boards:
myboard:
append:
DTC_OVERLAY_FILE: myboard.overlay
OVERLAY_CONFIG: myboard.conf
/my-regular-expression-over-board-names/:
append:
DTC_OVERLAY_FILE: myregexp.overlay
OVERLAY_CONFIG: myregexp.conf
(Note that since the snippet feature is intended to be extensible, the
same snippet name may appear in multiple files throughout any
directory in SNIPPET_ROOT, with each addition augmenting prior ones.)
This initial syntax aligns with the following snippet design goals:
- extensible: you can add board-specific support for an existing
snippet in another module
- able to combine multiple types of configuration: we can now apply a
.overlay and .conf at the same time
- specializable: this allows you to define settings that only apply
to a selectable set of boards (including with regular expression
support for matching against multiple similar boards that follow
a naming convention)
- DRY: you can use regular expressions to apply the same snippet
settings to multiple boards like this: /(board1|board2|...)/
This patch is not trying to design and implement everything up front.
Additional features can and will be added to the snippet.yml format
over time; using YAML as a format allows us to make
backwards-compatible extensions as needed.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
2023-01-08 07:27:07 +08:00
|
|
|
include: append-schema
|
|
|
|
boards:
|
|
|
|
example: |
|
|
|
|
Board-specific appending can be done here:
|
|
|
|
|
|
|
|
name: foo
|
|
|
|
boards:
|
|
|
|
qemu_cortex_m3:
|
|
|
|
append:
|
2023-08-09 03:44:30 +08:00
|
|
|
EXTRA_DTC_OVERLAY_FILE: m3.overlay
|
snippets: initial snippet.yml support
Add a new script, snippets.py, which is responsible for searching
SNIPPET_ROOT for snippet definitions, validating them, and informing
the build system about what needs doing as a result.
Use this script in snippets.cmake to:
- validate any discovered snippet.yml files
- error out on undefined snippets
- add a 'snippets' build system target that prints all snippet
names (analogous to 'boards' and 'shields' targets)
- handle any specific build system settings properly,
by include()-ing a file it generates
With this patch, you can define or extend a snippet in a snippet.yml
file anywhere underneath a directory in SNIPPET_ROOT. The snippet.yml
file format has a schema whose initial definition is in a new file,
snippet-schema.yml.
This initial snippet.yml file format supports adding .overlay and
.conf files, like this:
name: foo
append:
DTC_OVERLAY_FILE: foo.overlay
OVERLAY_CONFIG: foo.conf
boards:
myboard:
append:
DTC_OVERLAY_FILE: myboard.overlay
OVERLAY_CONFIG: myboard.conf
/my-regular-expression-over-board-names/:
append:
DTC_OVERLAY_FILE: myregexp.overlay
OVERLAY_CONFIG: myregexp.conf
(Note that since the snippet feature is intended to be extensible, the
same snippet name may appear in multiple files throughout any
directory in SNIPPET_ROOT, with each addition augmenting prior ones.)
This initial syntax aligns with the following snippet design goals:
- extensible: you can add board-specific support for an existing
snippet in another module
- able to combine multiple types of configuration: we can now apply a
.overlay and .conf at the same time
- specializable: this allows you to define settings that only apply
to a selectable set of boards (including with regular expression
support for matching against multiple similar boards that follow
a naming convention)
- DRY: you can use regular expressions to apply the same snippet
settings to multiple boards like this: /(board1|board2|...)/
This patch is not trying to design and implement everything up front.
Additional features can and will be added to the snippet.yml format
over time; using YAML as a format allows us to make
backwards-compatible extensions as needed.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
2023-01-08 07:27:07 +08:00
|
|
|
type: map
|
|
|
|
mapping:
|
|
|
|
regex;(.*):
|
|
|
|
type: map
|
|
|
|
mapping:
|
|
|
|
append:
|
|
|
|
include: append-schema
|