OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/drivers/sensor/bma280/Kconfig

169 lines
3.3 KiB
Plaintext
Raw Normal View History

sensors: bma280: move bma280 to own directory under drivers/sensor/ Change-Id: I1c73d36a51ea88fbda3707c7d6630d54f8fd3545 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 20:19:51 +08:00
# Kconfig - BMA280 Three Axis Accelerometer configuration options
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
#
# Copyright (c) 2016 Intel Corporation
#
license: Replace Apache boilerplate with SPDX tag Replace the existing Apache 2.0 boilerplate header with an SPDX tag throughout the zephyr code tree. This patch was generated via a script run over the master branch. Also updated doc/porting/application.rst that had a dependency on line numbers in a literal include. Manually updated subsys/logging/sys_log.c that had a malformed header in the original file. Also cleanup several cases that already had a SPDX tag and we either got a duplicate or missed updating. Jira: ZEP-1457 Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c Signed-off-by: David B. Kinder <david.b.kinder@intel.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-01-19 09:01:01 +08:00
# SPDX-License-Identifier: Apache-2.0
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
#
menuconfig BMA280
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
bool "BMA280 Three Axis Accelerometer Family"
drivers: sensor: clean up Kconfig files - place all sensor Kconfig options in submenu - separate device drivers and common options with a comment line - align help text Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2017-09-22 02:28:16 +08:00
depends on I2C
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
help
sensors: bma280: add support for BMC150 accelerometer Add support for BMC150 accelerometer which differs from BMA280 only in id, I2C address and acceleration data width. Change-Id: Iccf47ecc5de9fdb1b9e45f1561c5dbb54f720806 Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-04-19 21:53:37 +08:00
Enable driver for BMA280 I2C-based triaxial accelerometer sensor
family.
sensor: Eliminate repetitive Kconfig "depends on" in sensor drivers For each sensor driver, wrap all Kconfig symbols in a big if/endif conditional rather than repeating "depends on" for each symbol. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-13 06:23:26 +08:00
if BMA280
sensors: bma280: add support for BMC150 accelerometer Add support for BMC150 accelerometer which differs from BMA280 only in id, I2C address and acceleration data width. Change-Id: Iccf47ecc5de9fdb1b9e45f1561c5dbb54f720806 Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-04-19 21:53:37 +08:00
choice
prompt "Chip type"
default BMA280_CHIP_BMA280
help
Choose desired chip type from the BMA280 family.
config BMA280_CHIP_BMA280
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
bool "BMA280"
sensors: bma280: add support for BMC150 accelerometer Add support for BMC150 accelerometer which differs from BMA280 only in id, I2C address and acceleration data width. Change-Id: Iccf47ecc5de9fdb1b9e45f1561c5dbb54f720806 Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-04-19 21:53:37 +08:00
help
Choose this option to enable the BMA280 chip.
config BMA280_CHIP_BMC150_ACCEL
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
bool "BMC150_ACCEL"
sensors: bma280: add support for BMC150 accelerometer Add support for BMC150 accelerometer which differs from BMA280 only in id, I2C address and acceleration data width. Change-Id: Iccf47ecc5de9fdb1b9e45f1561c5dbb54f720806 Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-04-19 21:53:37 +08:00
help
Choose this option to enable the accelerometer of the BMC150 chip.
endchoice
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
config BMA280_NAME
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
string "Driver name"
sensors: bma280: add support for BMC150 accelerometer Add support for BMC150 accelerometer which differs from BMA280 only in id, I2C address and acceleration data width. Change-Id: Iccf47ecc5de9fdb1b9e45f1561c5dbb54f720806 Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-04-19 21:53:37 +08:00
default "BMA280" if BMA280_CHIP_BMA280
default "BMC150_ACCEL" if BMA280_CHIP_BMC150_ACCEL
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
help
sensors: bma280: add support for BMC150 accelerometer Add support for BMC150 accelerometer which differs from BMA280 only in id, I2C address and acceleration data width. Change-Id: Iccf47ecc5de9fdb1b9e45f1561c5dbb54f720806 Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-04-19 21:53:37 +08:00
Device name with which the sensor is identified.
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
sensors: do not use choice for I2C address Set the value for the I2C address directly and use only one per sensor. Change-Id: I24d06a964e8e372eddf262b70fe5d9854a04563c Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-05 20:45:54 +08:00
config BMA280_I2C_ADDR
hex "BMA280 I2C address"
default 0x18 if BMA280_CHIP_BMA280
default 0x10 if BMA280_CHIP_BMC150_ACCEL
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
help
I2C address of the BMA280 sensor.
sensors: do not use choice for I2C address Set the value for the I2C address directly and use only one per sensor. Change-Id: I24d06a964e8e372eddf262b70fe5d9854a04563c Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-05 20:45:54 +08:00
0x10: Use if the SDO pin is pulled to GND.
0x10: Use if the SDO pin is pulled to VDDIO.
0x18: Use if the SDO pin is pulled to GND.
0x19: Use if the SDO pin is pulled to VDDIO.
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
config BMA280_I2C_MASTER_DEV_NAME
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
string "I2C master device name"
i2c: use I2C_X nameing instead of I2CX Other IOs use this format, so lets be consistent and use I2C_0 instead of I2C0 and I2C_1 an instead of I2C1. Change-Id: I591ab08e14bd533ef0fac38e596559da783863b8 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-04-23 23:06:05 +08:00
default "I2C_0"
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
help
sensors: bma280: add support for BMC150 accelerometer Add support for BMC150 accelerometer which differs from BMA280 only in id, I2C address and acceleration data width. Change-Id: Iccf47ecc5de9fdb1b9e45f1561c5dbb54f720806 Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-04-19 21:53:37 +08:00
Specify the device name of the I2C master device to which chip is
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
connected.
choice
prompt "Trigger mode"
drivers: sensors: use unified kernel threads convert all sensor drivers to use threads and the unified kernel API and remove all legacy APIs. Change-Id: Ica43ea74ecbbf85273f718f182c413a9dcd8abc6 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-11-10 23:05:53 +08:00
default BMA280_TRIGGER_GLOBAL_THREAD
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
help
Specify the type of triggering to be used by the driver.
config BMA280_TRIGGER_NONE
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
bool "No trigger"
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
drivers: sensors: use unified kernel threads convert all sensor drivers to use threads and the unified kernel API and remove all legacy APIs. Change-Id: Ica43ea74ecbbf85273f718f182c413a9dcd8abc6 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-11-10 23:05:53 +08:00
config BMA280_TRIGGER_GLOBAL_THREAD
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
bool "Use global thread"
unified: dissociate system workqueue from common workqueue module Making a reference to the common work queue code should not necessarily drag in the system workqueue, since it is possible to use a workqueue that is not the system workqueue. This is done by moving the system workqueue into its own code module. Moving the system workqueue to its own code module allows removing the NANO_WORKQUEUE and SYSTEM_WORKQUEUE kconfig options, and compiling the common workqueue code and system workqueue all the time. They are only linked in the final image if a reference to them exist, same as the other kernel modules. Change-Id: I6f48d2542bda24f4702e7c2e317818dd082b3c11 Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-11-05 03:47:32 +08:00
depends on GPIO
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
select BMA280_TRIGGER
drivers: sensors: use unified kernel threads convert all sensor drivers to use threads and the unified kernel API and remove all legacy APIs. Change-Id: Ica43ea74ecbbf85273f718f182c413a9dcd8abc6 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-11-10 23:05:53 +08:00
config BMA280_TRIGGER_OWN_THREAD
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
bool "Use own thread"
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
depends on GPIO
select BMA280_TRIGGER
endchoice
config BMA280_TRIGGER
bool
config BMA280_GPIO_DEV_NAME
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
string "GPIO device"
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
default "GPIO_0"
sensor: Eliminate repetitive Kconfig "depends on" in sensor drivers For each sensor driver, wrap all Kconfig symbols in a big if/endif conditional rather than repeating "depends on" for each symbol. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-13 06:23:26 +08:00
depends on BMA280_TRIGGER
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
help
sensors: bma280: add support for BMC150 accelerometer Add support for BMC150 accelerometer which differs from BMA280 only in id, I2C address and acceleration data width. Change-Id: Iccf47ecc5de9fdb1b9e45f1561c5dbb54f720806 Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-04-19 21:53:37 +08:00
The device name of the GPIO device to which the chip's interrupt pins
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
are connected.
config BMA280_GPIO_PIN_NUM
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
int "Interrupt GPIO pin number"
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
default 0
sensor: Eliminate repetitive Kconfig "depends on" in sensor drivers For each sensor driver, wrap all Kconfig symbols in a big if/endif conditional rather than repeating "depends on" for each symbol. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-13 06:23:26 +08:00
depends on BMA280_TRIGGER
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
help
sensors: bma280: add support for BMC150 accelerometer Add support for BMC150 accelerometer which differs from BMA280 only in id, I2C address and acceleration data width. Change-Id: Iccf47ecc5de9fdb1b9e45f1561c5dbb54f720806 Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-04-19 21:53:37 +08:00
The number of the GPIO on which the interrupt signal from the chip
will be received.
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
drivers: sensors: use unified kernel threads convert all sensor drivers to use threads and the unified kernel API and remove all legacy APIs. Change-Id: Ica43ea74ecbbf85273f718f182c413a9dcd8abc6 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-11-10 23:05:53 +08:00
config BMA280_THREAD_PRIORITY
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
int "Thread priority"
sensor: Eliminate repetitive Kconfig "depends on" in sensor drivers For each sensor driver, wrap all Kconfig symbols in a big if/endif conditional rather than repeating "depends on" for each symbol. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-13 06:23:26 +08:00
depends on BMA280_TRIGGER_OWN_THREAD
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
default 10
help
drivers: sensors: use unified kernel threads convert all sensor drivers to use threads and the unified kernel API and remove all legacy APIs. Change-Id: Ica43ea74ecbbf85273f718f182c413a9dcd8abc6 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-11-10 23:05:53 +08:00
Priority of thread used by the driver to handle interrupts.
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
drivers: sensors: use unified kernel threads convert all sensor drivers to use threads and the unified kernel API and remove all legacy APIs. Change-Id: Ica43ea74ecbbf85273f718f182c413a9dcd8abc6 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-11-10 23:05:53 +08:00
config BMA280_THREAD_STACK_SIZE
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
int "Thread stack size"
sensor: Eliminate repetitive Kconfig "depends on" in sensor drivers For each sensor driver, wrap all Kconfig symbols in a big if/endif conditional rather than repeating "depends on" for each symbol. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-13 06:23:26 +08:00
depends on BMA280_TRIGGER_OWN_THREAD
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
default 1024
help
drivers: sensors: use unified kernel threads convert all sensor drivers to use threads and the unified kernel API and remove all legacy APIs. Change-Id: Ica43ea74ecbbf85273f718f182c413a9dcd8abc6 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-11-10 23:05:53 +08:00
Stack size of thread used by the driver to handle interrupts.
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
choice
prompt "Acceleration measurement range"
default BMA280_PMU_RANGE_2G
help
Measurement range for acceleration values.
config BMA280_PMU_RANGE_2G
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
bool "+/-2g"
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
config BMA280_PMU_RANGE_4G
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
bool "+/-4g"
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
config BMA280_PMU_RANGE_8G
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
bool "+/-8g"
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
config BMA280_PMU_RANGE_16G
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
bool "+/-16g"
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
endchoice
choice
prompt "Acceleration data filter bandwidth"
default BMA280_PMU_BW_7
help
Bandwidth of filtered acceleration data.
config BMA280_PMU_BW_1
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
bool "7.81Hz"
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
config BMA280_PMU_BW_2
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
bool "15.63HZ"
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
config BMA280_PMU_BW_3
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
bool "31.25Hz"
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
config BMA280_PMU_BW_4
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
bool "62.5Hz"
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
config BMA280_PMU_BW_5
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
bool "125Hz"
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
config BMA280_PMU_BW_6
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
bool "250HZ"
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
config BMA280_PMU_BW_7
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
bool "500Hz"
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
config BMA280_PMU_BW_8
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
bool "unfiltered"
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
endchoice
sensor: Eliminate repetitive Kconfig "depends on" in sensor drivers For each sensor driver, wrap all Kconfig symbols in a big if/endif conditional rather than repeating "depends on" for each symbol. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-13 06:23:26 +08:00
endif # BMA280