zephyr/boards/arm/mimxrt1040_evk/mimxrt1040_evk.yaml

#
# Copyright 2023 NXP
#
# SPDX-License-Identifier: Apache-2.0
#

identifier: mimxrt1040_evk
name: NXP MIMXRT1040-EVK
type: mcu
arch: arm
toolchain:
  - zephyr
  - gnuarmemb
  - xtools
ram: 32768
flash: 8192
supported:
  - arduino_gpio
  - gpio
  - pwm
  - adc
  - spi
boards: arm: mixmrt1040_evk: add RT1040-EVK board Add RT1040 EVK board definition. This board port currently enables UART and GPIO only. Programming is supported by JLink host tools. Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com> 2023-02-21 01:10:58 +08:00			`#`
			`# Copyright 2023 NXP`
			`#`
			`# SPDX-License-Identifier: Apache-2.0`
			`#`

			`identifier: mimxrt1040_evk`
			`name: NXP MIMXRT1040-EVK`
			`type: mcu`
			`arch: arm`
			`toolchain:`
			`- zephyr`
			`- gnuarmemb`
			`- xtools`
			`ram: 32768`
			`flash: 8192`
			`supported:`
			`- arduino_gpio`
			`- gpio`
boards: arm: mimxrt1040: enabled PWM Enabled PWM output on J16.6, using tests/drivers/pwm/pwm_api. This board does not connect a PWM output to an LED, so only the PWM testcase was verified to function. Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com> 2023-02-21 03:10:00 +08:00			`- pwm`
boards: arm: mimxrt1040_evk: enable ADC support Enable ADC support for RT1040 EVK. Tested using samples/drivers/adc, using channels 3 and 4 of ADC0. Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com> 2023-02-21 05:07:04 +08:00			`- adc`
boards: arm: mixmrt1040_evk: enable SPI support Add support for SPI on RT1040 EVK, tested using tests/drivers/spi/spi_loopback sample. Transfers are enabled using DMA mode, with LPSPI1. Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com> 2023-02-21 09:32:52 +08:00			`- spi`