OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/samples/display/ili9340/dts_fixup.h

36 lines
988 B
C
Raw Normal View History

samples: display: Updated ili9340 sample to use DTS Update ili9340 display driver sample to make use of device tree overlay. Part of #10894 Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2018-10-30 02:10:11 +08:00
/*
* Copyright (c) 2017 Jan Van Winkel <jan.van_winkel@dxplore.eu>
*
* SPDX-License-Identifier: Apache-2.0
*/
#if defined(CONFIG_SPI_STM32) && defined(CONFIG_ILI9340)
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_ILI9340_SPI_DEV_NAME \
dts_fixups: Update labels generated from DTS with DT_ prefix All labels containing "_<8-hex-digits>_" or "16550_<3or6-hex-digits>_" in their names, assumed to be generated by the extracting script, are updated with the DT_ prefix, to reflect the recent changes made to the script. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 19:24:15 +08:00
DT_ST_STM32_SPI_FIFO_40013000_ILITEK_ILI9340_0_BUS_NAME
samples: display: Updated ili9340 sample to use DTS Update ili9340 display driver sample to make use of device tree overlay. Part of #10894 Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2018-10-30 02:10:11 +08:00
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_ILI9340_SPI_SLAVE_NUMBER \
dts_fixups: Update labels generated from DTS with DT_ prefix All labels containing "_<8-hex-digits>_" or "16550_<3or6-hex-digits>_" in their names, assumed to be generated by the extracting script, are updated with the DT_ prefix, to reflect the recent changes made to the script. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 19:24:15 +08:00
DT_ST_STM32_SPI_FIFO_40013000_ILITEK_ILI9340_0_BASE_ADDRESS
samples: display: Updated ili9340 sample to use DTS Update ili9340 display driver sample to make use of device tree overlay. Part of #10894 Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2018-10-30 02:10:11 +08:00
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_ILI9340_CMD_DATA_GPIO_PORT_NAME \
dts_fixups: Update labels generated from DTS with DT_ prefix All labels containing "_<8-hex-digits>_" or "16550_<3or6-hex-digits>_" in their names, assumed to be generated by the extracting script, are updated with the DT_ prefix, to reflect the recent changes made to the script. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 19:24:15 +08:00
DT_ST_STM32_SPI_FIFO_40013000_ILITEK_ILI9340_0_CMD_DATA_GPIOS_CONTROLLER
samples: display: Updated ili9340 sample to use DTS Update ili9340 display driver sample to make use of device tree overlay. Part of #10894 Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2018-10-30 02:10:11 +08:00
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_ILI9340_CMD_DATA_PIN \
dts_fixups: Update labels generated from DTS with DT_ prefix All labels containing "_<8-hex-digits>_" or "16550_<3or6-hex-digits>_" in their names, assumed to be generated by the extracting script, are updated with the DT_ prefix, to reflect the recent changes made to the script. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 19:24:15 +08:00
DT_ST_STM32_SPI_FIFO_40013000_ILITEK_ILI9340_0_CMD_DATA_GPIOS_PIN
samples: display: Updated ili9340 sample to use DTS Update ili9340 display driver sample to make use of device tree overlay. Part of #10894 Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2018-10-30 02:10:11 +08:00
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_ILI9340_DEV_NAME \
dts_fixups: Update labels generated from DTS with DT_ prefix All labels containing "_<8-hex-digits>_" or "16550_<3or6-hex-digits>_" in their names, assumed to be generated by the extracting script, are updated with the DT_ prefix, to reflect the recent changes made to the script. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 19:24:15 +08:00
DT_ST_STM32_SPI_FIFO_40013000_ILITEK_ILI9340_0_LABEL
samples: display: Updated ili9340 sample to use DTS Update ili9340 display driver sample to make use of device tree overlay. Part of #10894 Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2018-10-30 02:10:11 +08:00
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_ILI9340_RESET_GPIO_PORT_NAME \
dts_fixups: Update labels generated from DTS with DT_ prefix All labels containing "_<8-hex-digits>_" or "16550_<3or6-hex-digits>_" in their names, assumed to be generated by the extracting script, are updated with the DT_ prefix, to reflect the recent changes made to the script. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 19:24:15 +08:00
DT_ST_STM32_SPI_FIFO_40013000_ILITEK_ILI9340_0_RESET_GPIOS_CONTROLLER
samples: display: Updated ili9340 sample to use DTS Update ili9340 display driver sample to make use of device tree overlay. Part of #10894 Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2018-10-30 02:10:11 +08:00
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_ILI9340_RESET_PIN \
dts_fixups: Update labels generated from DTS with DT_ prefix All labels containing "_<8-hex-digits>_" or "16550_<3or6-hex-digits>_" in their names, assumed to be generated by the extracting script, are updated with the DT_ prefix, to reflect the recent changes made to the script. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 19:24:15 +08:00
DT_ST_STM32_SPI_FIFO_40013000_ILITEK_ILI9340_0_RESET_GPIOS_PIN
samples: display: Updated ili9340 sample to use DTS Update ili9340 display driver sample to make use of device tree overlay. Part of #10894 Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2018-10-30 02:10:11 +08:00
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define DT_ILI9340_SPI_FREQ \
dts_fixups: Update labels generated from DTS with DT_ prefix All labels containing "_<8-hex-digits>_" or "16550_<3or6-hex-digits>_" in their names, assumed to be generated by the extracting script, are updated with the DT_ prefix, to reflect the recent changes made to the script. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 19:24:15 +08:00
DT_ST_STM32_SPI_FIFO_40013000_ILITEK_ILI9340_0_SPI_MAX_FREQUENCY
samples: display: Updated ili9340 sample to use DTS Update ili9340 display driver sample to make use of device tree overlay. Part of #10894 Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2018-10-30 02:10:11 +08:00
#endif