zephyr/soc/riscv32/openisa_rv32m1/soc_zero_riscy.h

77 lines
2.5 KiB
C
Raw Normal View History

/*
* Copyright (c) 2018 Foundries.io Ltd
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef SOC_RISCV32_OPENISA_RV32M1_SOC_ZERO_RISCY_H_
#define SOC_RISCV32_OPENISA_RV32M1_SOC_ZERO_RISCY_H_
/* Control and Status Registers (CSRs) available for ZERO_RISCY. */
#define ZERO_RISCY_MSTATUS 0x300U
#define ZERO_RISCY_MTVEC 0x305U
#define ZERO_RISCY_MEPC 0x341U
#define ZERO_RISCY_MCAUSE 0x342U
#define ZERO_RISCY_PCCR0 0x780U
#define ZERO_RISCY_PCCR1 0x781U
#define ZERO_RISCY_PCCR2 0x782U
#define ZERO_RISCY_PCCR3 0x783U
#define ZERO_RISCY_PCCR4 0x784U
#define ZERO_RISCY_PCCR5 0x785U
#define ZERO_RISCY_PCCR6 0x786U
#define ZERO_RISCY_PCCR7 0x787U
#define ZERO_RISCY_PCCR8 0x788U
#define ZERO_RISCY_PCCR9 0x789U
#define ZERO_RISCY_PCCR10 0x78AU
#define ZERO_RISCY_PCCR 0x78BU
#define ZERO_RISCY_PCER 0x7A0U
#define ZERO_RISCY_PCMR 0x7A1U
#define ZERO_RISCY_MHARTID 0xF14U
/*
* Map from SoC-specific configuration to generic Zephyr macros.
*
* These are expected by the code in arch/, and must be provided for
* the kernel to work (or even build at all).
*
* Some of these may also apply to ZERO-RISCY; needs investigation.
*/
/*
* MSTATUS CSR number. (Note this is the standard value in the RISC-V
* privileged ISA v1.10).
*/
#define SOC_MSTATUS_REG ZERO_RISCY_MSTATUS
/* MSTATUS's interrupt enable mask. This is also standard. */
#define SOC_MSTATUS_IEN (1U << 3)
/*
* Exception code mask. Use of the bottom five bits is a subset of
* what the standard allocates (which is XLEN-1 bits).
*/
#define SOC_MCAUSE_EXP_MASK 0x1F
/*
* Assembler instruction to exit from interrupt in machine mode.
* The name "ERET" is a leftover from pre-v1.10 privileged ISA specs.
* The "mret" mnemonic works properly with the Pulpino toolchain;
* YMMV if using a generic toolchain.
*/
#define SOC_ERET mret
/* The ecall exception number. This is a standard value. */
#define SOC_MCAUSE_ECALL_EXP 11
/*
* Default MSTATUS value to write when scheduling in a new thread for
* the first time.
*
* - Preserve machine privileges in MPP. If you see any documentation
* telling you that MPP is read-only on this SoC, don't believe its
* lies.
* - Enable interrupts when exiting from exception into a new thread
* by setting MPIE now, so it will be copied into IE on mret.
*/
#define ZERO_RISCY_MSTATUS_MPP_M (0x3U << 11)
#define ZERO_RISCY_MSTATUS_MPIE_EN (1U << 7)
#define SOC_MSTATUS_DEF_RESTORE (ZERO_RISCY_MSTATUS_MPP_M | \
ZERO_RISCY_MSTATUS_MPIE_EN)
#endif /* SOC_RISCV32_OPENISA_RV32M1_SOC_ZERO_RISCY_H_ */