zephyr/boards/xtensa/nxp_adsp_imx8m/nxp_adsp_imx8m.yaml

identifier: nxp_adsp_imx8m
name: NXP i.MX8M Plus EVK Audio DSP
type: mcu
arch: xtensa
toolchain:
  - zephyr
testing:
  only_tags:
    - kernel
    - sof
    - ipm
supported:
  - uart
boards: xtensa: adsp: add support for imx8m board Add support for i.MX8MP board by defining defconfig, board configuration and device tree. Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> 2021-10-02 00:01:59 +08:00			`identifier: nxp_adsp_imx8m`
boards: xtensa: nxp_adsp_imx8m: update board config based on renamed soc SOC has been renamed to mimx8ml8 to link this board to the MIMX8ML8 device from nxp_hal/mcux/mcux-sdk/. We need this in order to use the drivers from mcux-sdk. Therefore, update board configs based on renamed soc. Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> 2023-03-10 23:56:01 +08:00			`name: NXP i.MX8M Plus EVK Audio DSP`
boards: xtensa: adsp: add support for imx8m board Add support for i.MX8MP board by defining defconfig, board configuration and device tree. Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> 2021-10-02 00:01:59 +08:00			`type: mcu`
			`arch: xtensa`
			`toolchain:`
			`- zephyr`
			`testing:`
			`only_tags:`
yamllint: indentation: fix files in boards/ Fix the YAML files indentation for files in boards/. Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com> 2023-01-04 03:04:01 +08:00			`- kernel`
			`- sof`
boards: nxp_adsp_imx8m: add tag for openamp_rsc_table sample test Add ipm tag for testing openamp_rsc_table sample for nxp_adsp_imx8m platform. Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> 2023-08-11 22:09:12 +08:00			`- ipm`
boards: xtensa: nxp_adsp_imx8m: Add UART support for the ADSP from i.MX8MP Enable UART on the DSP from the i.MX8MP target: - add corresponding nodes in dtsi and dts; - create a dts overlay for uart; - add a config fragment for uart and console configuration. So, in order to compile an application and enable UART a user must run west build using DTC_OVERLAY_FILE and CONF_FILE. Here's an example for hello_world: west build -p always -b nxp_adsp_imx8m samples/hello_world/ -DDTC_OVERLAY_FILE="boards/xtensa/nxp_adsp_imx8m/ nxp_adsp_imx8m_uart.overlay" -DCONF_FILE="boards/xtensa/nxp_adsp_imx8m/ nxp_adsp_imx8m_uart.conf" For other applications, like SOF, where we don't need UART, we simply run: west build -p always -b nxp_adsp_imx8m ../modules/audio/sof/ -- -DTOOLCHAIN=/opt/zephyr-sdk-0.15.2/xtensa-nxp_imx8m_adsp_zephyr-elf/ bin/xtensa-nxp_imx8m_adsp_zephyr-elf -DINIT_CONFIG=imx8m_defconfig The nxp_adsp_imx8m is using the nxp_imx_iuart driver. For now, is used in poll mode. Next step is to enable the interrupt controller in DSP and use the interrupt driver UART. Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> 2023-03-10 23:58:41 +08:00			`supported:`
			`- uart`