zephyr/boards/adafruit/adafruit_itsybitsy/adafruit_itsybitsy_nrf52840...

identifier: adafruit_itsybitsy/nrf52840
name: Adafruit ItsyBitsy nRF52840 Express
type: mcu
arch: arm
ram: 256
flash: 1024
toolchain:
  - zephyr
  - gnuarmemb
  - xtools
supported:
  - adc
  - ble
  - counter
  - gpio
  - i2c
  - pwm
  - spi
  - usb_cdc
  - usb_device
  - watchdog
vendor: adafruit
boards: arm: adafruit_itsybitsy_nrf52840: Convert to v2 Converts the board to hwmv2 Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no> 2024-02-02 19:38:00 +08:00			`identifier: adafruit_itsybitsy/nrf52840`
boards: arm: Add adafruit_itsybitsy_nrf52840 board Adds support for the Adafruit ItsyBitsy nRF52840 Express. This board ships with the UF2 bootloader, so the device has been set up so that Zephyr applications are flashed the same way that other (Adafruit) firmware is flashed with the UF2 bootloader. This has been tested locally, and the button, blinky and led_apa102 samples run without problems. Signed-off-by: Embla Flatlandsmo <embla.flatlandsmo@gmail.com> 2022-10-11 19:14:48 +08:00			`name: Adafruit ItsyBitsy nRF52840 Express`
			`type: mcu`
			`arch: arm`
			`ram: 256`
			`flash: 1024`
			`toolchain:`
			`- zephyr`
			`- gnuarmemb`
			`- xtools`
			`supported:`
			`- adc`
			`- ble`
			`- counter`
			`- gpio`
			`- i2c`
			`- pwm`
			`- spi`
			`- usb_cdc`
			`- usb_device`
			`- watchdog`
boards: add vendor to board yaml This is coming from devicetree and corrosponds to what we have in the dts/bindings/vendor-prefixes.txt file. This will allow for static filtering, especially with twister, i.e. no need to build anything to know the vendor of a board All of the vendor data was extracted automatically from the devicetree, so some platforms might not have the right vendor or no vendor at all right now, we need to fix some of the DTS information or do this manually to get this 100% correct. But we are close. Signed-off-by: Anas Nashif <anas.nashif@intel.com> 2023-06-23 02:47:45 +08:00			`vendor: adafruit`