zephyr/boards/arm/sam_e70_xplained/sam_e70_xplained.yaml

identifier: sam_e70_xplained
name: SAM E70 Xplained
type: mcu
arch: arm
toolchain:
  - zephyr
  - gnuarmemb
  - xtools
supported:
  - netif:eth
  - adc
  - gpio
  - spi
  - watchdog
  - usb_device
  - pwm
boards: add board meta-data Add board metadata to be consumed by the sanitycheck script to provide better matching with testcases and to test based on features declated in the board files. Signed-off-by: Anas Nashif <anas.nashif@intel.com> 2017-04-05 11:08:59 +08:00			`identifier: sam_e70_xplained`
update: board names Signed-off-by: Anas Nashif <anas.nashif@intel.com> 2017-06-17 02:23:38 +08:00			`name: SAM E70 Xplained`
boards: add board meta-data Add board metadata to be consumed by the sanitycheck script to provide better matching with testcases and to test based on features declated in the board files. Signed-off-by: Anas Nashif <anas.nashif@intel.com> 2017-04-05 11:08:59 +08:00			`type: mcu`
			`arch: arm`
			`toolchain:`
			`- zephyr`
build: Replace GCC ARM Embedded with GNU Arm Embedded The old GCC ARM Embedded website on launchpad (https://launchpad.net/gcc-arm-embedded) has been superseeded by the new GNU Arm Embedded one (https://developer.arm.com/open-source/gnu-toolchain/gnu-rm). This also means a change of name from "GCC" to "GNU". Reflect this in the enviroment variables so that the proper term is used henceforth. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no> 2018-08-03 23:11:23 +08:00			`- gnuarmemb`
boards: arm: Add xtools as a supported toolchain Update all ARM boards to have xtools as a supported toolchain. Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2019-01-10 00:25:16 +08:00			`- xtools`
boards: mark boards with built-in networking support Signed-off-by: Anas Nashif <anas.nashif@intel.com> 2017-06-30 22:40:35 +08:00			`supported:`
boards: support feature classes in yaml Signed-off-by: Anas Nashif <anas.nashif@intel.com> 2017-07-31 20:53:14 +08:00			`- netif:eth`
sam: adc: Updated SAM ADC driver. Updated to work with new ADC API. Signed-off-by: Justin Watson <jwatson5@gmail.com> 2018-08-16 06:01:57 +08:00			`- adc`
boards: atmel: Enable gpio in board.yaml List gpio as a support feature of the sam4s_xplained & sam_e70_xplained boards. Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2018-10-04 00:41:18 +08:00			`- gpio`
boards: same70: Enable SPI0 on dts Enable the SPI interface on Arduino Shield(J505 Header) default Signed-off-by: qianfan Zhao <qianfanguijin@163.com> 2018-10-16 15:02:54 +08:00			`- spi`
drivers: watchdog: Adding watchdog support for sam SOC Adding watchdog driver for sam SoC. The current implemntation just diables the watchdog on device boot. This PR adds the following support for SAM3X, SAM4S and SAME70 1. Activate processor reset 2. Activate all reset 3. Generate interrupt on watchdog timer expiration. Signed-off-by: Subramanian Meenakshi Sundaram <subbu147@gmail.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2018-10-25 13:16:25 +08:00			`- watchdog`
boards: enable USB device on Atmel SMART SAM E70 Xplained Board This enables the USBHS interface on the Atmel SMART SAM E70 Xplained Board, by adding an entry to the DTS. It also updates the documentation and mark usb_device as supported for the tests. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> 2018-11-01 05:42:47 +08:00			`- usb_device`
boards: enable PWM devices on Atmel SMART SAM E70 Xplained Board This commit enables the PWM0 device on the Atmel SMART SAM E70 Xplained Board, by adding the entries to the DTS and configuring the PWM pins from the EXT1 connector (channel 0, inverted) and EXT2 connector (channel 2, inverted and non-inverted) with the corresponding peripheral functions. It also updates the documentation and mark pwm as supported for the tests. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> 2019-01-29 04:48:26 +08:00			`- pwm`