unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
/*
|
2016-11-05 03:47:32 +08:00
|
|
|
* Copyright (c) 2016 Intel Corporation
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
* Copyright (c) 2016 Wind River Systems, Inc.
|
|
|
|
*
|
2017-01-19 09:01:01 +08:00
|
|
|
* SPDX-License-Identifier: Apache-2.0
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
*/
|
|
|
|
|
|
|
|
/**
|
|
|
|
* @file
|
|
|
|
*
|
|
|
|
* Workqueue support functions
|
|
|
|
*/
|
|
|
|
|
2016-11-08 23:36:50 +08:00
|
|
|
#include <kernel_structs.h>
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
#include <wait_q.h>
|
|
|
|
#include <errno.h>
|
|
|
|
|
|
|
|
static void work_q_main(void *work_q_ptr, void *p2, void *p3)
|
|
|
|
{
|
|
|
|
struct k_work_q *work_q = work_q_ptr;
|
|
|
|
|
|
|
|
ARG_UNUSED(p2);
|
|
|
|
ARG_UNUSED(p3);
|
|
|
|
|
|
|
|
while (1) {
|
|
|
|
struct k_work *work;
|
|
|
|
k_work_handler_t handler;
|
|
|
|
|
2017-07-04 00:09:44 +08:00
|
|
|
work = k_queue_get(&work_q->queue, K_FOREVER);
|
2017-07-04 00:24:10 +08:00
|
|
|
if (!work) {
|
|
|
|
continue;
|
|
|
|
}
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
|
|
|
|
handler = work->handler;
|
|
|
|
|
2016-09-26 14:36:49 +08:00
|
|
|
/* Reset pending state so it can be resubmitted by handler */
|
2016-10-05 05:11:05 +08:00
|
|
|
if (atomic_test_and_clear_bit(work->flags,
|
2017-07-04 00:09:44 +08:00
|
|
|
K_WORK_STATE_PENDING)) {
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
handler(work);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Make sure we don't hog up the CPU if the FIFO never (or
|
|
|
|
* very rarely) gets empty.
|
|
|
|
*/
|
|
|
|
k_yield();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-10-17 05:46:34 +08:00
|
|
|
void k_work_q_start(struct k_work_q *work_q, k_thread_stack_t *stack,
|
2016-11-15 05:46:14 +08:00
|
|
|
size_t stack_size, int prio)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
{
|
2017-07-04 00:09:44 +08:00
|
|
|
k_queue_init(&work_q->queue);
|
2017-03-31 04:07:02 +08:00
|
|
|
k_thread_create(&work_q->thread, stack, stack_size, work_q_main,
|
|
|
|
work_q, 0, 0, prio, 0, 0);
|
2017-08-23 04:15:23 +08:00
|
|
|
_k_object_init(work_q);
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
}
|
|
|
|
|
2016-10-05 04:58:46 +08:00
|
|
|
#ifdef CONFIG_SYS_CLOCK_EXISTS
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
static void work_timeout(struct _timeout *t)
|
|
|
|
{
|
|
|
|
struct k_delayed_work *w = CONTAINER_OF(t, struct k_delayed_work,
|
|
|
|
timeout);
|
|
|
|
|
|
|
|
/* submit work to workqueue */
|
|
|
|
k_work_submit_to_queue(w->work_q, &w->work);
|
|
|
|
}
|
|
|
|
|
|
|
|
void k_delayed_work_init(struct k_delayed_work *work, k_work_handler_t handler)
|
|
|
|
{
|
|
|
|
k_work_init(&work->work, handler);
|
2016-10-06 05:16:01 +08:00
|
|
|
_init_timeout(&work->timeout, work_timeout);
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
work->work_q = NULL;
|
2017-08-23 04:15:23 +08:00
|
|
|
|
|
|
|
_k_object_init(work);
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
int k_delayed_work_submit_to_queue(struct k_work_q *work_q,
|
|
|
|
struct k_delayed_work *work,
|
2017-04-21 23:55:34 +08:00
|
|
|
s32_t delay)
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
{
|
|
|
|
int key = irq_lock();
|
|
|
|
int err;
|
|
|
|
|
|
|
|
/* Work cannot be active in multiple queues */
|
|
|
|
if (work->work_q && work->work_q != work_q) {
|
|
|
|
err = -EADDRINUSE;
|
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Cancel if work has been submitted */
|
|
|
|
if (work->work_q == work_q) {
|
|
|
|
err = k_delayed_work_cancel(work);
|
|
|
|
if (err < 0) {
|
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Attach workqueue so the timeout callback can submit it */
|
|
|
|
work->work_q = work_q;
|
|
|
|
|
2016-10-18 03:34:53 +08:00
|
|
|
if (!delay) {
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
/* Submit work if no ticks is 0 */
|
|
|
|
k_work_submit_to_queue(work_q, &work->work);
|
|
|
|
} else {
|
|
|
|
/* Add timeout */
|
2016-10-18 03:34:53 +08:00
|
|
|
_add_timeout(NULL, &work->timeout, NULL,
|
|
|
|
_TICK_ALIGN + _ms_to_ticks(delay));
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
err = 0;
|
|
|
|
|
|
|
|
done:
|
|
|
|
irq_unlock(key);
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
int k_delayed_work_cancel(struct k_delayed_work *work)
|
|
|
|
{
|
|
|
|
int key = irq_lock();
|
|
|
|
|
|
|
|
if (!work->work_q) {
|
|
|
|
irq_unlock(key);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2017-07-04 00:24:10 +08:00
|
|
|
if (k_work_pending(&work->work)) {
|
|
|
|
/* Remove from the queue if already submitted */
|
|
|
|
if (!k_queue_remove(&work->work_q->queue, &work->work)) {
|
|
|
|
irq_unlock(key);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
_abort_timeout(&work->timeout);
|
|
|
|
}
|
unified: initial unified kernel implementation
Summary of what this includes:
initialization:
Copy from nano_init.c, with the following changes:
- the main thread is the continuation of the init thread, but an idle
thread is created as well
- _main() initializes threads in groups and starts the EXE group
- the ready queues are initialized
- the main thread is marked as non-essential once the system init is
done
- a weak main() symbol is provided if the application does not provide a
main() function
scheduler:
Not an exhaustive list, but basically provide primitives for:
- adding/removing a thread to/from a wait queue
- adding/removing a thread to/from the ready queue
- marking thread as ready
- locking/unlocking the scheduler
- instead of locking interrupts
- getting/setting thread priority
- checking what state (coop/preempt) a thread is currenlty running in
- rescheduling threads
- finding what thread is the next to run
- yielding/sleeping/aborting sleep
- finding the current thread
threads:
- Add operationns on threads, such as creating and starting them.
standardized handling of kernel object return codes:
- Kernel objects now cause _Swap() to return the following values:
0 => operation successful
-EAGAIN => operation timed out
-Exxxxx => operation failed for another reason
- The thread's swap_data field can be used to return any additional
information required to complete the operation, such as the actual
result of a successful operation.
timeouts:
- same as nano timeouts, renamed to simply 'timeouts'
- the kernel is still tick-based, but objects take timeout values in
ms for forward compatibility with a tickless kernel.
semaphores:
- Port of the nanokernel semaphores, which have the same basic behaviour
as the microkernel ones. Semaphore groups are not yet implemented.
- These semaphores are enhanced in that they accept an initial count and a
count limit. This allows configuring them as binary semaphores, and also
provisioning them without having to "give" the semaphore multiple times
before using them.
mutexes:
- Straight port of the microkernel mutexes. An init function is added to
allow defining them at runtime.
pipes:
- straight port
timers:
- amalgamation of nano and micro timers, with all functionalities
intact.
events:
- re-implementation, using semaphores and workqueues.
mailboxes:
- straight port
message queues:
- straight port of microkernel FIFOs
memory maps:
- straight port
workqueues:
- Basically, have all APIs follow the k_ naming rule, and use the _timeout
subsystem from the unified kernel directory, and not the _nano_timeout
one.
stacks:
- Port of the nanokernel stacks. They can now have multiple threads
pending on them and threads can wait with a timeout.
LIFOs:
- Straight port of the nanokernel LIFOs.
FIFOs:
- Straight port of the nanokernel FIFOs.
Work by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens <allan.stephens@windriver.com>
Benjamin Walsh <benjamin.walsh@windriver.com>
Change-Id: Id3cadb3694484ab2ca467889cfb029be3cd3a7d6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-09-03 06:55:39 +08:00
|
|
|
|
|
|
|
/* Detach from workqueue */
|
|
|
|
work->work_q = NULL;
|
|
|
|
|
|
|
|
irq_unlock(key);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
2016-10-05 04:58:46 +08:00
|
|
|
#endif /* CONFIG_SYS_CLOCK_EXISTS */
|