OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/samples/net/wpan_serial/prj.conf

30 lines
592 B
Plaintext
Raw Normal View History

wpan_serial: Implement 802.15.4 serial radio protocol Implement serial-radio protocol used in Contiki-based border routers to interact with 802.15.4 devices connected over serial or USB-serial. Change-Id: I938b34ca32ae7a08e5d48e3bea585cda6c98c113 Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2016-10-07 21:35:31 +08:00
CONFIG_GPIO=y
CONFIG_ARC_INIT=n
CONFIG_USB=y
CONFIG_USB_DW=y
CONFIG_USB_DEVICE_STACK=y
CONFIG_SYS_LOG_USB_DW_LEVEL=0
CONFIG_USB_CDC_ACM=y
CONFIG_SYS_LOG_USB_LEVEL=0
CONFIG_SERIAL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_UART_LINE_CTRL=y
drivers: cc2520: Correct configuration options At the moment CC2520 configuration options are selected inside "TI CC2520 Driver RAW channe" submenu like: [*] TI CC2520 Driver support ---- [ ] TI CC2520 Driver RAW channel ---> Make RAW channel depends on TI CC2520. Change-Id: I92879b7f4391f1842c012b6c03c78956e90b9441 Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2017-03-21 17:11:53 +08:00
CONFIG_IEEE802154_CC2520=y
drivers/net/ieee802154: Change configuration prefix This commit changes Kconfig prefix for ieee802154 drivers to IEEE802154_*. This is done for consistency with config prefixes used in other subsystems. Change-Id: Ibbb4d96d2b748f4f13135bde85304ec34c5a90a6 Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no>
2017-02-06 18:49:16 +08:00
CONFIG_IEEE802154_CC2520_RAW=y
wpan_serial: Implement 802.15.4 serial radio protocol Implement serial-radio protocol used in Contiki-based border routers to interact with 802.15.4 devices connected over serial or USB-serial. Change-Id: I938b34ca32ae7a08e5d48e3bea585cda6c98c113 Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2016-10-07 21:35:31 +08:00
CONFIG_NET_BUF=y
CONFIG_NETWORKING=y
samples/net: Remove the need for IEEE 802.15.4 stack in wpan serial It can uses CONFIG_NET_APP_IEEE802154_* options instead. Change-Id: I2501ca2015cfc1e68c6c384cb32c21084d2cb30d Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-03-16 00:36:36 +08:00
CONFIG_NET_APP_SETTINGS=y
wpan_serial: Implement 802.15.4 serial radio protocol Implement serial-radio protocol used in Contiki-based border routers to interact with 802.15.4 devices connected over serial or USB-serial. Change-Id: I938b34ca32ae7a08e5d48e3bea585cda6c98c113 Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2016-10-07 21:35:31 +08:00
CONFIG_NET_NBUF_RX_COUNT=6
CONFIG_NET_NBUF_TX_COUNT=6
wpan_serial: Minimize debug output by default and set proper nbuf size Nbuf data size needs to be set to 128 bytes, specifically for wpan sample. Debug output kills timing, and thus can generate spurious failures on reception, so limiting it to errors by default. Change-Id: Ia0b8c904e0bc66a7922af4f317db623db6c51462 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2016-11-17 20:55:29 +08:00
CONFIG_NET_NBUF_DATA_SIZE=128
wpan_serial: Implement 802.15.4 serial radio protocol Implement serial-radio protocol used in Contiki-based border routers to interact with 802.15.4 devices connected over serial or USB-serial. Change-Id: I938b34ca32ae7a08e5d48e3bea585cda6c98c113 Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2016-10-07 21:35:31 +08:00
CONFIG_SYS_LOG=y
wpan_serial: Minimize debug output by default and set proper nbuf size Nbuf data size needs to be set to 128 bytes, specifically for wpan sample. Debug output kills timing, and thus can generate spurious failures on reception, so limiting it to errors by default. Change-Id: Ia0b8c904e0bc66a7922af4f317db623db6c51462 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2016-11-17 20:55:29 +08:00
CONFIG_SYS_LOG_DEFAULT_LEVEL=3
ieee802154: conf: add common log level Add common log level for all IEEE802154 drivers. Change-Id: If92c96b14e630d4482aadf9cacb25662d6663399 Signed-off-by: Johann Fischer <j.fischer@phytec.de>
2017-01-10 21:24:01 +08:00
CONFIG_SYS_LOG_IEEE802154_DRIVER_LEVEL=1
wpan_serial: Implement 802.15.4 serial radio protocol Implement serial-radio protocol used in Contiki-based border routers to interact with 802.15.4 devices connected over serial or USB-serial. Change-Id: I938b34ca32ae7a08e5d48e3bea585cda6c98c113 Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2016-10-07 21:35:31 +08:00
random: Restructure RANDOM Kconfig Restructure the RANDOM Kconfig to match the structure used in other drivers with a single top level menu. Move the true random number generators to appear first in the menu, with pseudo generators at the bottom. Do not present pseudo generators if a true random generator is presented. This change implies that tests, samples and applications that require the random driver interface must now select CONFIG_RANDOM_GENERATOR. In order for tests and samples to build (and run) on platforms that have no random driver it remains necessary to select the CONFIG_TEST_RANDOM_GENERATOR. Note that CONFIG_TEST_RANDOM_GENERATOR retains its original purpose of enabling a random driver that delivers non random numbers for the purpose of testing only. Change-Id: I2e28e44b4adf800e64a885aefe36a52da8aa455a Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
2016-11-29 04:39:43 +08:00
CONFIG_RANDOM_GENERATOR=y
wpan_serial: Implement 802.15.4 serial radio protocol Implement serial-radio protocol used in Contiki-based border routers to interact with 802.15.4 devices connected over serial or USB-serial. Change-Id: I938b34ca32ae7a08e5d48e3bea585cda6c98c113 Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
2016-10-07 21:35:31 +08:00
CONFIG_TEST_RANDOM_GENERATOR=y