OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/boards/arm/lpcxpresso54114/pinmux.c

114 lines
2.4 KiB
C
Raw Normal View History

arm: lpcxpresso54114_m0: Add board support for slave core Add a board port to allow creation of "firmware" code that will run on the slave core (Cortex-M0+). Origin: Original Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-05-16 03:16:13 +08:00
/*
* Copyright (c) 2017, NXP
* SPDX-License-Identifier: Apache-2.0
*/
#include <init.h>
#include <pinmux.h>
#include <fsl_common.h>
boards: lpcxpresso54114_m0: fix pinmux.c Some of the headers referenced in the pinmux.c file don't exist. Match the includes that the lpcxpresso54114_m4 pinmux.c file uses. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-10-05 05:31:01 +08:00
#include <fsl_iocon.h>
#include <soc.h>
arm: lpcxpresso54114_m0: Add board support for slave core Add a board port to allow creation of "firmware" code that will run on the slave core (Cortex-M0+). Origin: Original Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-05-16 03:16:13 +08:00
static int lpcxpresso_54114_pinmux_init(struct device *dev)
{
ARG_UNUSED(dev);
#ifdef CONFIG_PINMUX_MCUX_LPC_PORT0
struct device *port0 =
device_get_binding(CONFIG_PINMUX_MCUX_LPC_PORT0_NAME);
#endif
#ifdef CONFIG_PINMUX_MCUX_LPC_PORT1
struct device *port1 =
device_get_binding(CONFIG_PINMUX_MCUX_LPC_PORT1_NAME);
#endif
#ifdef CONFIG_USART_MCUX_LPC_0
/* USART0 RX, TX */
const u32_t port0_pin0_config = (
IOCON_PIO_FUNC1 |
IOCON_PIO_MODE_INACT |
IOCON_PIO_INV_DI |
IOCON_PIO_DIGITAL_EN |
IOCON_PIO_INPFILT_OFF |
IOCON_PIO_SLEW_STANDARD |
IOCON_PIO_OPENDRAIN_DI
);
const u32_t port0_pin1_config = (
IOCON_PIO_FUNC1 |
IOCON_PIO_MODE_INACT |
IOCON_PIO_INV_DI |
IOCON_PIO_DIGITAL_EN |
IOCON_PIO_INPFILT_OFF |
IOCON_PIO_SLEW_STANDARD |
IOCON_PIO_OPENDRAIN_DI
);
pinmux_pin_set(port0, 0, port0_pin0_config);
pinmux_pin_set(port0, 1, port0_pin1_config);
#endif
#ifdef CONFIG_GPIO_MCUX_LPC_PORT0
const u32_t port0_pin29_config = (
IOCON_PIO_FUNC0 |
IOCON_PIO_MODE_PULLUP |
IOCON_PIO_INV_DI |
IOCON_PIO_DIGITAL_EN |
IOCON_PIO_INPFILT_OFF |
IOCON_PIO_OPENDRAIN_DI
);
pinmux_pin_set(port0, 29, port0_pin29_config);
boards: lpcxpresso54114: Add SW for lpcxpresso54114 Update dts files for SW, Update pinmux.c for pin mux settings of the SW. Signed-off-by: Mark Wang <yichang.wang@nxp.com>
2019-01-15 15:55:17 +08:00
const u32_t port0_pin24_config = (
IOCON_PIO_FUNC0 |
IOCON_PIO_INV_DI |
IOCON_PIO_DIGITAL_EN |
IOCON_PIO_INPFILT_OFF |
IOCON_PIO_OPENDRAIN_DI
);
pinmux_pin_set(port0, 24, port0_pin24_config);
const u32_t port0_pin31_config = (
IOCON_PIO_FUNC0 |
IOCON_PIO_MODE_PULLUP |
IOCON_PIO_INV_DI |
IOCON_PIO_DIGITAL_EN |
IOCON_PIO_INPFILT_OFF |
IOCON_PIO_OPENDRAIN_DI
);
pinmux_pin_set(port0, 31, port0_pin31_config);
const u32_t port0_pin4_config = (
IOCON_PIO_FUNC0 |
IOCON_PIO_MODE_PULLUP |
IOCON_PIO_INV_DI |
IOCON_PIO_DIGITAL_EN |
IOCON_PIO_INPFILT_OFF |
IOCON_PIO_OPENDRAIN_DI
);
pinmux_pin_set(port0, 4, port0_pin4_config);
arm: lpcxpresso54114_m0: Add board support for slave core Add a board port to allow creation of "firmware" code that will run on the slave core (Cortex-M0+). Origin: Original Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-05-16 03:16:13 +08:00
#endif
#ifdef CONFIG_GPIO_MCUX_LPC_PORT1
const u32_t port1_pin10_config = (
IOCON_PIO_FUNC0 |
IOCON_PIO_MODE_PULLUP |
IOCON_PIO_INV_DI |
IOCON_PIO_DIGITAL_EN |
IOCON_PIO_INPFILT_OFF |
IOCON_PIO_SLEW_STANDARD |
IOCON_PIO_OPENDRAIN_DI
);
pinmux_pin_set(port1, 10, port1_pin10_config);
#endif
return 0;
}
SYS_INIT(lpcxpresso_54114_pinmux_init, PRE_KERNEL_1,
CONFIG_PINMUX_INIT_PRIORITY);