OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/boards/arm/mimxrt1050_evk/board.cmake

18 lines
285 B
CMake
Raw Normal View History

boards: arm: Add NXP mimxrt1050_evk Adds support for the NXP MIMXRT1050-EVK board, an entry-level development board for the new mimxrt1052 Cortex-M7 SoC. Adds pinmuxing, dts, documentation, and jlink debug support for the new board. Note that pinmuxing uses the mcux pinmux driver directly rather than the Zephyr pinmux interface. The mimxrt1052 SoC has complicated pinmuxing that may require changing the Zephyr pinmux interface to support, so for now let's use the mcux driver directly. We are also not yet configuring the external flash, therefore a debugger is required to load code to the internal sram. The on-board OpenSDA circuit with jlink firmware is sufficient, and the 'make debug' build target is supported. Samples tested include: hello_world, philosophers, synchronization, basic/blinky, and basic/button. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-08-12 03:46:04 +08:00
#
# Copyright (c) 2017, NXP
#
# SPDX-License-Identifier: Apache-2.0
#
set_ifndef(OPENSDA_FW jlink)
if(OPENSDA_FW STREQUAL jlink)
scripts: refactor flash/debug scripts to remove "shell" The Python-based runners have replaced the old shell scripts. Refactor the build system accordingly: - FLASH_SCRIPT is now BOARD_FLASH_RUNNER - DEBUG_SCRIPT is now BOARD_DEBUG_RUNNER The values, rather than being the names of files, are now the names of runners in scripts/support/runner. They are still short, descriptive names like "openocd", "jlink", "em-starterkit", etc. Adjust the zephyr_flash_debug.py call and runner internals accordingly. Have each runner class report a name and the commands it can handle. This lets us move some boilerplate from each do_run() method into the common run() routine, and enables further improvements in future patches. The handles_command() method is temporary, and will be replaced by a more general mechanism for describing runner capabilities in a subsequent patch. The initial use case for extending this is to add device tree awareness to the runners. To try to avoid user confusion, abort the configuration if an xxx_SCRIPT is defined. Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
2017-11-17 02:32:00 +08:00
set_ifndef(BOARD_DEBUG_RUNNER jlink)
boards: arm: Add NXP mimxrt1050_evk Adds support for the NXP MIMXRT1050-EVK board, an entry-level development board for the new mimxrt1052 Cortex-M7 SoC. Adds pinmuxing, dts, documentation, and jlink debug support for the new board. Note that pinmuxing uses the mcux pinmux driver directly rather than the Zephyr pinmux interface. The mimxrt1052 SoC has complicated pinmuxing that may require changing the Zephyr pinmux interface to support, so for now let's use the mcux driver directly. We are also not yet configuring the external flash, therefore a debugger is required to load code to the internal sram. The on-board OpenSDA circuit with jlink firmware is sufficient, and the 'make debug' build target is supported. Samples tested include: hello_world, philosophers, synchronization, basic/blinky, and basic/button. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-08-12 03:46:04 +08:00
endif()
mimxrt1050_evk: Fix setting of JLINK_DEVICE The '=' character was incorrectly getting passed to the JLinkGDBServer device argument, and caused the server to fail to connect to the target. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-11-16 04:52:49 +08:00
set(JLINK_DEVICE Cortex-M7)
boards: arm: Add NXP mimxrt1050_evk Adds support for the NXP MIMXRT1050-EVK board, an entry-level development board for the new mimxrt1052 Cortex-M7 SoC. Adds pinmuxing, dts, documentation, and jlink debug support for the new board. Note that pinmuxing uses the mcux pinmux driver directly rather than the Zephyr pinmux interface. The mimxrt1052 SoC has complicated pinmuxing that may require changing the Zephyr pinmux interface to support, so for now let's use the mcux driver directly. We are also not yet configuring the external flash, therefore a debugger is required to load code to the internal sram. The on-board OpenSDA circuit with jlink firmware is sufficient, and the 'make debug' build target is supported. Samples tested include: hello_world, philosophers, synchronization, basic/blinky, and basic/button. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-08-12 03:46:04 +08:00
set_property(GLOBAL APPEND PROPERTY FLASH_SCRIPT_ENV_VARS
mimxrt1050_evk: Fix setting of JLINK_DEVICE The '=' character was incorrectly getting passed to the JLinkGDBServer device argument, and caused the server to fail to connect to the target. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-11-16 04:52:49 +08:00
JLINK_DEVICE
boards: arm: Add NXP mimxrt1050_evk Adds support for the NXP MIMXRT1050-EVK board, an entry-level development board for the new mimxrt1052 Cortex-M7 SoC. Adds pinmuxing, dts, documentation, and jlink debug support for the new board. Note that pinmuxing uses the mcux pinmux driver directly rather than the Zephyr pinmux interface. The mimxrt1052 SoC has complicated pinmuxing that may require changing the Zephyr pinmux interface to support, so for now let's use the mcux driver directly. We are also not yet configuring the external flash, therefore a debugger is required to load code to the internal sram. The on-board OpenSDA circuit with jlink firmware is sufficient, and the 'make debug' build target is supported. Samples tested include: hello_world, philosophers, synchronization, basic/blinky, and basic/button. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-08-12 03:46:04 +08:00
)