OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/soc/arm/silabs_exx32/Kconfig

210 lines
5.3 KiB
Plaintext
Raw Normal View History

arm: exx32: Add Silabs EFM32WG soc files The Silicon Labs EFM32 Wonder Gecko MCU includes: * Cortex-M4F core at 48MHz * up to 256KB of flash and 32KB of RAM * USB with host and OTG support * multiple low power peripherals Signed-off-by: Christian Taedcke <hacking@taedcke.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-04-06 00:49:41 +08:00
# Copyright (c) 2017 Christian Taedcke
arm: exx32: Add Silabs EFM32PG12B soc files The Silicon Labs EFM32 Pearl Gecko MCU includes: * Cortex-M4F core at 40MHz * up to 1024KB of flash and 256KB of RAM * multiple low power peripherals Ported from EFM32WG: https://www.silabs.com/documents/public/application-notes/an0918.0-efm32_to_efm32jgpg_migration_guide.pdf Signed-off-by: Gil Benkö <gil.benkoe@pm.me> Signed-off-by: Christian Taedcke <hacking@taedcke.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-04-11 17:47:19 +08:00
# Copyright (c) 2018 Gil Benkoe
arm: exx32: Add Silabs EFM32WG soc files The Silicon Labs EFM32 Wonder Gecko MCU includes: * Cortex-M4F core at 48MHz * up to 256KB of flash and 32KB of RAM * USB with host and OTG support * multiple low power peripherals Signed-off-by: Christian Taedcke <hacking@taedcke.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-04-06 00:49:41 +08:00
# SPDX-License-Identifier: Apache-2.0
config SOC_FAMILY_EXX32
bool
soc: silabs: Enable Segger RTT This change allows you to use RTT with EFR32 chips. Signed-off-by: Endre Karlson <endre.karslon@gmail.com>
2018-11-12 03:24:38 +08:00
select HAS_SEGGER_RTT
arm: exx32: Add Silabs EFM32WG soc files The Silicon Labs EFM32 Wonder Gecko MCU includes: * Cortex-M4F core at 48MHz * up to 256KB of flash and 32KB of RAM * USB with host and OTG support * multiple low power peripherals Signed-off-by: Christian Taedcke <hacking@taedcke.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-04-06 00:49:41 +08:00
if SOC_FAMILY_EXX32
config SOC_FAMILY
string
default "silabs_exx32"
arm: soc: move arm SoCs to top-dir Move the SoC outside of the architecture tree and put them at the same level as boards and architectures allowing both SoCs and boards to be maintained outside the tree. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-09-04 04:47:02 +08:00
source "soc/arm/silabs_exx32/*/Kconfig.soc"
arm: exx32: Add Silabs EFM32WG soc files The Silicon Labs EFM32 Wonder Gecko MCU includes: * Cortex-M4F core at 48MHz * up to 256KB of flash and 32KB of RAM * USB with host and OTG support * multiple low power peripherals Signed-off-by: Christian Taedcke <hacking@taedcke.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-04-06 00:49:41 +08:00
config SOC_PART_NUMBER
string
help
This string holds the full part number of the SoC. It is a hidden option
that you should not set directly. The part number selection choice defines
the default value for this string.
soc: silabs_exx32: Add independent Kconfig options for HAL libraries Zephyr gecko drivers depend on libraries provided by the vendor. The same libraries may also be used directly by the application code or RAIL library. To facilitate the latter use case scenario this commit adds Kconfig options to independently enable compilation of vendor HAL library modules. Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2018-12-12 23:30:00 +08:00
config SOC_GECKO_CORE
bool
help
Set if the Core interrupt handling (CORE) HAL module is used.
config SOC_GECKO_CRYOTIMER
bool
help
Set if the Ultra Low Energy Timer/Counter (CRYOTIMER) HAL module is used.
arm: silabs: Enable DCDC before setting up clk This enables DCDC for Silabs devices before initializing the clock. Signed-off-by: Endre Karlson <endre.karslon@gmail.com>
2018-11-08 20:48:12 +08:00
config SOC_GECKO_EMU
soc: arm: exx32: Add Silabs EFR32MG12P soc files The Silicon Labs EFR32MG12P Mighty Gecko MCU includes: * Cortex-M4F core at 40MHz * up to 1024KB of flash and 256KB of RAM * integrated Sub-GHz and/or 2.4GHz radio * multiple low power peripherals Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com> Signed-off-by: Endre Karlson <endre.karslon@gmail.com>
2018-10-17 14:58:14 +08:00
bool
help
soc: silabs_exx32: Add independent Kconfig options for HAL libraries Zephyr gecko drivers depend on libraries provided by the vendor. The same libraries may also be used directly by the application code or RAIL library. To facilitate the latter use case scenario this commit adds Kconfig options to independently enable compilation of vendor HAL library modules. Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2018-12-12 23:30:00 +08:00
Set if the Energy Management Unit (EMU) HAL module is used.
config SOC_GECKO_GPIO
bool
help
Set if the General Purpose Input/Output (GPIO) HAL module is used.
config SOC_GECKO_I2C
bool
help
Set if the Inter-Integrated Circuit Interface (I2C) HAL module is used.
config SOC_GECKO_LETIMER
bool
help
Set if the Low Energy Timer (LETIMER) HAL module is used.
config SOC_GECKO_LEUART
bool
help
Set if the Low Energy Universal Asynchronous Receiver/Transmitter (LEUART)
HAL module is used.
config SOC_GECKO_MSC
bool
help
Set if the Memory System Controller (MSC) HAL module is used.
config SOC_GECKO_PRS
bool
help
Set if the Peripheral Reflex System (PRS) HAL module is used.
config SOC_GECKO_RMU
bool
help
Set if the Reset Management Unit (RMU) HAL module is used.
config SOC_GECKO_RTC
bool
help
Set if the Real Time Counter (RTC) HAL module is used.
config SOC_GECKO_RTCC
bool
help
Set if the Real Time Counter and Calendar (RTCC) HAL module is used.
config SOC_GECKO_TIMER
bool
help
Set if the Timer/Counter (TIMER) HAL module is used.
config SOC_GECKO_USART
bool
help
Set if the Universal Synchronous Asynchronous Receiver/Transmitter (USART)
HAL module is used.
config SOC_GECKO_WDOG
bool
help
Set if the Watchdog Timer (WDOG) HAL module is used.
arm: silabs: Enable DCDC before setting up clk This enables DCDC for Silabs devices before initializing the clock. Signed-off-by: Endre Karlson <endre.karslon@gmail.com>
2018-11-08 20:48:12 +08:00
drivers: entropy: gecko: add entropy driver based on GECKO TRNG Add entropy driver based on GECKO TRNG module along with device tree support for EFM32PG and EFR32MG SOCs. Signed-off-by: Pooja Karanjekar <pooja.karanjekar@lemonbeat.com>
2020-02-21 22:22:05 +08:00
config SOC_GECKO_TRNG
bool
help
Set if the SoC has a True Random Number Generator (TRNG) module.
arm: silabs: Enable DCDC before setting up clk This enables DCDC for Silabs devices before initializing the clock. Signed-off-by: Endre Karlson <endre.karslon@gmail.com>
2018-11-08 20:48:12 +08:00
config SOC_GECKO_EMU_DCDC
bool "Enable SoC DC/DC regulator"
select SOC_GECKO_EMU
help
Enable the on chip DC/DC regulator
choice SOC_GECKO_EMU_DCDC_MODE
prompt "DC/DC mode"
depends on SOC_GECKO_EMU_DCDC
help
Select power configuration mode of the on chip DC/DC converter.
config SOC_GECKO_EMU_DCDC_MODE_UNCONFIGURED
bool "Initial / Unconfigured"
config SOC_GECKO_EMU_DCDC_MODE_ON
bool "DC/DC On"
config SOC_GECKO_EMU_DCDC_MODE_OFF
bool "DC/DC Off"
config SOC_GECKO_EMU_DCDC_MODE_BYPASS
bool "Bypass"
endchoice
soc: arm: exx32: Add Silabs EFR32MG12P soc files The Silicon Labs EFR32MG12P Mighty Gecko MCU includes: * Cortex-M4F core at 40MHz * up to 1024KB of flash and 256KB of RAM * integrated Sub-GHz and/or 2.4GHz radio * multiple low power peripherals Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com> Signed-off-by: Endre Karlson <endre.karslon@gmail.com>
2018-10-17 14:58:14 +08:00
soc: silabs_exx32: Add independent Kconfig options for HAL libraries Zephyr gecko drivers depend on libraries provided by the vendor. The same libraries may also be used directly by the application code or RAIL library. To facilitate the latter use case scenario this commit adds Kconfig options to independently enable compilation of vendor HAL library modules. Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2018-12-12 23:30:00 +08:00
config SOC_GECKO_CMU
arm: exx32: Add Silabs EFM32WG soc files The Silicon Labs EFM32 Wonder Gecko MCU includes: * Cortex-M4F core at 48MHz * up to 256KB of flash and 32KB of RAM * USB with host and OTG support * multiple low power peripherals Signed-off-by: Christian Taedcke <hacking@taedcke.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-04-06 00:49:41 +08:00
bool
help
Set if the clock management unit (CMU) is present in the SoC.
soc: silabs_exx32: Add independent Kconfig options for HAL libraries Zephyr gecko drivers depend on libraries provided by the vendor. The same libraries may also be used directly by the application code or RAIL library. To facilitate the latter use case scenario this commit adds Kconfig options to independently enable compilation of vendor HAL library modules. Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2018-12-12 23:30:00 +08:00
if SOC_GECKO_CMU
arm: exx32: Add Silabs EFM32WG soc files The Silicon Labs EFM32 Wonder Gecko MCU includes: * Cortex-M4F core at 48MHz * up to 256KB of flash and 32KB of RAM * USB with host and OTG support * multiple low power peripherals Signed-off-by: Christian Taedcke <hacking@taedcke.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-04-06 00:49:41 +08:00
choice
prompt "High Frequency Clock Selection"
default CMU_HFCLK_HFXO
config CMU_HFCLK_HFXO
bool "External high frequency crystal oscillator"
help
Set this option to use the external high frequency crystal oscillator
as high frequency clock.
config CMU_HFCLK_LFXO
bool "External low frequency crystal oscillator"
help
Set this option to use the external low frequency crystal oscillator
as high frequency clock.
config CMU_HFCLK_HFRCO
bool "Internal high frequency RC oscillator"
help
Set this option to use the internal high frequency RC oscillator as high frequency clock.
endchoice
config CMU_HFXO_FREQ
int "External high frequency oscillator frequency"
help
Set the external high frequency oscillator frequency in Hz. This should be set by the
board's defconfig.
config CMU_LFXO_FREQ
int "External low frequency oscillator frequency"
help
Set the external low frequency oscillator frequency in Hz. This should be set by the
board's defconfig.
soc: silabs_exx32: Make HFRCO frequency configurable This commit adds an option to configure the frequency in Hz for the HFRCO clock source. The default value for this option is 0 which skips the configuration of the HFRCO. This feature is supported for efm32gg, efm32jg, efm32pg, efm32fg and efm32mg SOCs currently. Signed-off-by: Pooja Karanjekar <pooja.karanjekar@lemonbeat.com>
2020-02-05 17:43:43 +08:00
config CMU_HFRCO_FREQ
int "Internal high frequency RC oscillator frequency"
default 0
depends on SOC_GECKO_HAS_HFRCO_FREQRANGE
help
Set the internal high frequency RC oscillator frequency in Hz. This should be set by the
board's defconfig. Only supported values may be used here. Setting this to 0, skips the
configuration of the high frequency RC oscillator completely. This may be desired, if
the bootloader already configured it properly or the device's default clock source should
be used with it's default configuration.
soc: silabs_exx32: Add independent Kconfig options for HAL libraries Zephyr gecko drivers depend on libraries provided by the vendor. The same libraries may also be used directly by the application code or RAIL library. To facilitate the latter use case scenario this commit adds Kconfig options to independently enable compilation of vendor HAL library modules. Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2018-12-12 23:30:00 +08:00
endif # SOC_GECKO_CMU
drivers: uart_gecko: use DT_<COMPAT>_<INSTANCE>_<PROP> defines Use the new DT_<COMPAT>_<INSTANCE>_<PROP> defines to instantiate devices. This commit adds also ability to define individual pin locations on SoC series that support the feature. Definitions of GPIO pins assigned to a given location have been moved from soc_pinmap.h file to board DTS file. Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2019-01-14 23:39:40 +08:00
config SOC_GECKO_HAS_INDIVIDUAL_PIN_LOCATION
bool
help
If enabled, indicates that SoC allows to configure individual pin
locations. This is supported by e.g. efr32fg1p, efr32mg12p series.
If disabled, indicates that pin locations are configured in groups.
This is supported by e.g. efm32hg, efm32wg series.
drivers: Add counter driver (RTCC) for SiLabs Gecko SoCs This commit adds counter driver based on RTCC module for SiLabs Gecko SoCs. Tested with SLWSTK6061A / BRD4250B wireless starter kit. Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2019-05-17 15:20:17 +08:00
config SOC_GECKO_HAS_ERRATA_RTCC_E201
bool
help
Set if the SoC is affected by errata RTCC_E201:
"When the RTCC is configured with a prescaler, the CCV1 top value enable
feature enabled by setting CCV1TOP in RTCC_CTRL fails to wrap the counter
when RTCC_CNT is equal to RTCC_CC1_CCV, as intended."
soc: silabs_exx32: Make HFRCO frequency configurable This commit adds an option to configure the frequency in Hz for the HFRCO clock source. The default value for this option is 0 which skips the configuration of the HFRCO. This feature is supported for efm32gg, efm32jg, efm32pg, efm32fg and efm32mg SOCs currently. Signed-off-by: Pooja Karanjekar <pooja.karanjekar@lemonbeat.com>
2020-02-05 17:43:43 +08:00
config SOC_GECKO_HAS_HFRCO_FREQRANGE
bool
help
If enabled, indicates that configuration of HFRCO frequency for this SOC is supported
via FREQRANGE field. This is supported for e.g. efr32fg1p, efr32mg12p series.
If disabled, indicates that configuration of HFRCO frequency for corresponding SOC
is not supported via this field. This is the case for e.g. efm32hg, efm32wg series.
arch: arm: soc: Cleanup Kconfig inclusion per SoC When we included SoC specific Kconfig files we do something like: gsource "arch/arm/soc/arm/*/Kconfig.soc" However, we should do that inside an if block for that SoC family so as to limit SoC family specific options to only being visible when that SoC family is selected. So we simply move the gsource and related items inside the if SOC_FAMILY_<SOC> block. Fixes: #7452 Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2018-05-10 23:17:19 +08:00
endif # SOC_FAMILY_EXX32