zephyr/drivers/i3c/i3c_common.c

545 lines
12 KiB
C
Raw Normal View History

/*
* Copyright (c) 2022 Intel Corporation
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <string.h>
#include <zephyr/toolchain.h>
#include <zephyr/sys/__assert.h>
#include <zephyr/sys/slist.h>
#include <zephyr/drivers/i3c.h>
#include <zephyr/logging/log.h>
LOG_MODULE_REGISTER(i3c, CONFIG_I3C_LOG_LEVEL);
void i3c_dump_msgs(const char *name, const struct i3c_msg *msgs,
uint8_t num_msgs, struct i3c_device_desc *target)
{
LOG_DBG("I3C msg: %s, addr=%x", name, target->dynamic_addr);
for (unsigned int i = 0; i < num_msgs; i++) {
const struct i3c_msg *msg = &msgs[i];
LOG_DBG(" %c len=%02x: ",
msg->flags & I3C_MSG_READ ? 'R' : 'W', msg->len);
if (!(msg->flags & I3C_MSG_READ)) {
LOG_HEXDUMP_DBG(msg->buf, msg->len, "contents:");
}
}
}
void i3c_addr_slots_set(struct i3c_addr_slots *slots,
uint8_t dev_addr,
enum i3c_addr_slot_status status)
{
int bitpos;
int idx;
__ASSERT_NO_MSG(slots != NULL);
if (dev_addr > I3C_MAX_ADDR) {
/* Invalid address. Do nothing. */
return;
}
bitpos = dev_addr * 2;
idx = bitpos / BITS_PER_LONG;
slots->slots[idx] &= ~((unsigned long)I3C_ADDR_SLOT_STATUS_MASK <<
(bitpos % BITS_PER_LONG));
slots->slots[idx] |= status << (bitpos % BITS_PER_LONG);
}
enum i3c_addr_slot_status
i3c_addr_slots_status(struct i3c_addr_slots *slots,
uint8_t dev_addr)
{
unsigned long status;
int bitpos;
int idx;
__ASSERT_NO_MSG(slots != NULL);
if (dev_addr > I3C_MAX_ADDR) {
/* Invalid address.
* Simply says it's reserved so it will not be
* used for anything.
*/
return I3C_ADDR_SLOT_STATUS_RSVD;
}
bitpos = dev_addr * 2;
idx = bitpos / BITS_PER_LONG;
status = slots->slots[idx] >> (bitpos % BITS_PER_LONG);
status &= I3C_ADDR_SLOT_STATUS_MASK;
return status;
}
int i3c_addr_slots_init(struct i3c_addr_slots *slots,
const struct i3c_dev_list *dev_list)
{
int i, ret = 0;
struct i3c_device_desc *i3c_dev;
struct i3c_i2c_device_desc *i2c_dev;
__ASSERT_NO_MSG(slots != NULL);
(void)memset(slots, 0, sizeof(*slots));
for (i = 0; i <= 7; i++) {
/* Addresses 0 to 7 are reserved */
i3c_addr_slots_set(slots, i, I3C_ADDR_SLOT_STATUS_RSVD);
/*
* Addresses within a single bit error of broadcast address
* are also reserved.
*/
i3c_addr_slots_set(slots, I3C_BROADCAST_ADDR ^ BIT(i),
I3C_ADDR_SLOT_STATUS_RSVD);
}
/* The broadcast address is reserved */
i3c_addr_slots_set(slots, I3C_BROADCAST_ADDR,
I3C_ADDR_SLOT_STATUS_RSVD);
/*
* If there is a static address for the I3C devices, check
* if this address is free, and there is no other devices of
* the same (pre-assigned) address on the bus.
*/
for (i = 0; i < dev_list->num_i3c; i++) {
i3c_dev = &dev_list->i3c[i];
if (i3c_dev->static_addr != 0U) {
if (i3c_addr_slots_is_free(slots, i3c_dev->static_addr)) {
/*
* Mark address slot as I3C device for now to
* detect address collisons. This marking may be
* released during address assignment.
*/
i3c_addr_slots_mark_i3c(slots, i3c_dev->static_addr);
} else {
/* Address slot is not free */
ret = -EINVAL;
goto out;
}
}
}
/*
* Mark all I2C addresses.
*/
for (i = 0; i < dev_list->num_i2c; i++) {
i2c_dev = &dev_list->i2c[i];
if (i3c_addr_slots_is_free(slots, i2c_dev->addr)) {
i3c_addr_slots_mark_i2c(slots, i2c_dev->addr);
} else {
/* Address slot is not free */
ret = -EINVAL;
goto out;
}
}
out:
return ret;
}
bool i3c_addr_slots_is_free(struct i3c_addr_slots *slots,
uint8_t dev_addr)
{
enum i3c_addr_slot_status status;
__ASSERT_NO_MSG(slots != NULL);
status = i3c_addr_slots_status(slots, dev_addr);
return (status == I3C_ADDR_SLOT_STATUS_FREE);
}
uint8_t i3c_addr_slots_next_free_find(struct i3c_addr_slots *slots)
{
uint8_t addr;
enum i3c_addr_slot_status status;
/* Addresses 0 to 7 are reserved. So start at 8. */
for (addr = 8; addr < I3C_MAX_ADDR; addr++) {
status = i3c_addr_slots_status(slots, addr);
if (status == I3C_ADDR_SLOT_STATUS_FREE) {
return addr;
}
}
return 0;
}
struct i3c_device_desc *i3c_dev_list_find(const struct i3c_dev_list *dev_list,
const struct i3c_device_id *id)
{
int i;
struct i3c_device_desc *ret = NULL;
__ASSERT_NO_MSG(dev_list != NULL);
for (i = 0; i < dev_list->num_i3c; i++) {
struct i3c_device_desc *desc = &dev_list->i3c[i];
if (desc->pid == id->pid) {
ret = desc;
break;
}
}
return ret;
}
struct i3c_device_desc *i3c_dev_list_i3c_addr_find(const struct i3c_dev_list *dev_list,
uint8_t addr)
{
int i;
struct i3c_device_desc *ret = NULL;
__ASSERT_NO_MSG(dev_list != NULL);
for (i = 0; i < dev_list->num_i3c; i++) {
struct i3c_device_desc *desc = &dev_list->i3c[i];
if (desc->dynamic_addr == addr) {
ret = desc;
break;
}
}
return ret;
}
struct i3c_i2c_device_desc *i3c_dev_list_i2c_addr_find(const struct i3c_dev_list *dev_list,
uint16_t addr)
{
int i;
struct i3c_i2c_device_desc *ret = NULL;
__ASSERT_NO_MSG(dev_list != NULL);
for (i = 0; i < dev_list->num_i2c; i++) {
struct i3c_i2c_device_desc *desc = &dev_list->i2c[i];
if (desc->addr == addr) {
ret = desc;
break;
}
}
return ret;
}
int i3c_dev_list_daa_addr_helper(struct i3c_addr_slots *addr_slots,
const struct i3c_dev_list *dev_list,
uint64_t pid, bool must_match,
bool assigned_okay,
struct i3c_device_desc **target,
uint8_t *addr)
{
struct i3c_device_desc *desc;
const uint16_t vendor_id = (uint16_t)(pid >> 32);
const uint32_t part_no = (uint32_t)(pid & 0xFFFFFFFFU);
uint8_t dyn_addr = 0;
int ret = 0;
const struct i3c_device_id i3c_id = I3C_DEVICE_ID(pid);
desc = i3c_dev_list_find(dev_list, &i3c_id);
if (must_match && (desc == NULL)) {
/*
* No device descriptor matching incoming PID and
* that we want an exact match.
*/
ret = -ENODEV;
LOG_DBG("PID 0x%04x%08x is not in registered device list",
vendor_id, part_no);
goto out;
}
if (desc->dynamic_addr != 0U) {
if (assigned_okay) {
/* Return the already assigned address if desired so. */
dyn_addr = desc->dynamic_addr;
goto out;
} else {
/*
* Bail If target already has an assigned address.
* This is probably due to having the same PIDs for multiple targets
* in the device tree.
*/
LOG_ERR("PID 0x%04x%08x already has "
"dynamic address (0x%02x) assigned",
vendor_id, part_no, desc->dynamic_addr);
ret = -EINVAL;
goto err;
}
}
/*
* Use the desired dynamic address as the new dynamic address
* if the slot is free.
*/
if (desc->init_dynamic_addr != 0U) {
if (i3c_addr_slots_is_free(addr_slots,
desc->init_dynamic_addr)) {
dyn_addr = desc->init_dynamic_addr;
goto out;
}
}
/*
* Find the next available address.
*/
dyn_addr = i3c_addr_slots_next_free_find(addr_slots);
if (dyn_addr == 0U) {
/* No free addresses available */
LOG_DBG("No more free addresses available.");
ret = -ENOSPC;
}
out:
*addr = dyn_addr;
*target = desc;
err:
return ret;
}
int i3c_device_basic_info_get(struct i3c_device_desc *target)
{
int ret;
uint8_t tmp_bcr;
struct i3c_ccc_getbcr bcr = {0};
struct i3c_ccc_getdcr dcr = {0};
struct i3c_ccc_mrl mrl = {0};
struct i3c_ccc_mwl mwl = {0};
/*
* Since some CCC functions requires BCR to function
* correctly, we save the BCR here and update the BCR
* in the descriptor. If any following operations fails,
* we can restore the BCR.
*/
tmp_bcr = target->bcr;
/* GETBCR */
ret = i3c_ccc_do_getbcr(target, &bcr);
if (ret != 0) {
goto out;
}
target->bcr = bcr.bcr;
/* GETDCR */
ret = i3c_ccc_do_getdcr(target, &dcr);
if (ret != 0) {
goto out;
}
/* GETMRL */
ret = i3c_ccc_do_getmrl(target, &mrl);
if (ret != 0) {
goto out;
}
/* GETMWL */
ret = i3c_ccc_do_getmwl(target, &mwl);
if (ret != 0) {
goto out;
}
target->dcr = dcr.dcr;
target->data_length.mrl = mrl.len;
target->data_length.mwl = mwl.len;
target->data_length.max_ibi = mrl.ibi_len;
out:
if (ret != 0) {
/* Restore BCR is any CCC fails. */
target->bcr = tmp_bcr;
}
return ret;
}
/**
* @brief Do SETDASA to set static address as dynamic address.
*
* @param dev Pointer to the device driver instance.
* @param[out] True if DAA is still needed. False if all registered
* devices have static addresses.
*
* @retval 0 if successful.
*/
static int i3c_bus_setdasa(const struct device *dev,
const struct i3c_dev_list *dev_list,
bool *need_daa)
{
int i, ret;
*need_daa = false;
/* Loop through the registered I3C devices */
for (i = 0; i < dev_list->num_i3c; i++) {
struct i3c_device_desc *desc = &dev_list->i3c[i];
/*
* A device without static address => need to do
* dynamic address assignment.
*/
if (desc->static_addr == 0U) {
*need_daa = true;
continue;
}
/*
* If there is a desired dynamic address and it is
* not the same as the static address, wait till
* ENTDAA to do address assignment as this is
* no longer SETDASA.
*/
if ((desc->init_dynamic_addr != 0U) &&
(desc->init_dynamic_addr != desc->static_addr)) {
*need_daa = true;
continue;
}
LOG_DBG("SETDASA for 0x%x", desc->static_addr);
ret = i3c_ccc_do_setdasa(desc);
if (ret == 0) {
desc->dynamic_addr = desc->static_addr;
} else {
LOG_ERR("SETDASA error on address 0x%x (%d)",
desc->static_addr, ret);
continue;
}
}
return 0;
}
int i3c_bus_init(const struct device *dev, const struct i3c_dev_list *dev_list)
{
int i, ret = 0;
bool need_daa = true;
struct i3c_ccc_events i3c_events;
/*
* Reset all connected targets. Also reset dynamic
* addresses for all devices as we have no idea what
* dynamic addresses the connected devices have
* (e.g. assigned during previous power cycle).
*
* Note that we ignore error for both RSTACT and RSTDAA
* as there may not be any connected devices responding
* to these CCCs.
*/
if (i3c_ccc_do_rstact_all(dev, I3C_CCC_RSTACT_RESET_WHOLE_TARGET) != 0) {
/*
* Reset Whole Target support is not required so
* if there is any NACK, we want to at least reset
* the I3C peripheral of targets.
*/
LOG_DBG("Broadcast RSTACT (whole target) was NACK.");
if (i3c_ccc_do_rstact_all(dev, I3C_CCC_RSTACT_PERIPHERAL_ONLY) != 0) {
LOG_DBG("Broadcast RSTACT (peripehral) was NACK.");
}
}
if (i3c_ccc_do_rstdaa_all(dev) != 0) {
LOG_DBG("Broadcast RSTDAA was NACK.");
}
/*
* Disable all events from targets to avoid them
* interfering with bus initialization,
* especially during DAA.
*/
i3c_events.events = I3C_CCC_EVT_ALL;
ret = i3c_ccc_do_events_all_set(dev, false, &i3c_events);
if (ret != 0) {
LOG_DBG("Broadcast DISEC was NACK.");
}
/*
* Set static addresses as dynamic addresses.
*/
ret = i3c_bus_setdasa(dev, dev_list, &need_daa);
if (ret != 0) {
goto err_out;
}
/*
* Perform Dynamic Address Assignment if needed.
*/
if (need_daa) {
ret = i3c_do_daa(dev);
if (ret != 0) {
/*
* Spec says to try once more
* if DAA fails the first time.
*/
ret = i3c_do_daa(dev);
if (ret != 0) {
/*
* Failure to finish dynamic address assignment
* is not the end of world... hopefully.
* Continue on so the devices already have
* addresses can still function.
*/
LOG_ERR("DAA was not successful.");
}
}
}
/*
* Loop through the registered I3C devices to retrieve
* basic target information.
*/
for (i = 0; i < dev_list->num_i3c; i++) {
struct i3c_device_desc *desc = &dev_list->i3c[i];
if (desc->dynamic_addr == 0U) {
continue;
}
ret = i3c_device_basic_info_get(desc);
if (ret != 0) {
LOG_ERR("Error getting basic device info for 0x%02x",
desc->static_addr);
} else {
LOG_DBG("Target 0x%02x, BCR 0x%02x, DCR 0x%02x, MRL %d, MWL %d, IBI %d",
desc->dynamic_addr, desc->bcr, desc->dcr,
desc->data_length.mrl, desc->data_length.mwl,
desc->data_length.max_ibi);
}
}
/*
* Only re-enable Hot-Join from targets.
* Target interrupts will be enabled when IBI is enabled.
* And transferring controller role is not supported so not need to
* enable the event.
*/
i3c_events.events = I3C_CCC_EVT_HJ;
ret = i3c_ccc_do_events_all_set(dev, true, &i3c_events);
if (ret != 0) {
LOG_DBG("Broadcast ENEC was NACK.");
}
err_out:
return ret;
}