OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/drivers/ieee802154/Kconfig.cc1200

184 lines
4.7 KiB
Plaintext
Raw Normal View History

drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
# Kconfig.cc1200 - TI CC1200 configuration options
#
menuconfig IEEE802154_CC1200
bool "TI CC1200 Driver support"
depends on NETWORKING
select NET_L2_IEEE802154_SUB_GHZ
if IEEE802154_CC1200
config IEEE802154_CC1200_DRV_NAME
string "TI CC1200 Driver's name"
default "cc1200"
help
kconfig: fix more help spacing issues Fix Kconfig help sections and add spacing to be consistent across all Kconfig file. In a previous run we missed a few. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-02-15 21:36:16 +08:00
This option sets the driver name
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
config IEEE802154_CC1200_SPI_DRV_NAME
string "SPI driver's name to use to access CC1200"
help
kconfig: fix more help spacing issues Fix Kconfig help sections and add spacing to be consistent across all Kconfig file. In a previous run we missed a few. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-02-15 21:36:16 +08:00
This option is mandatory to set which SPI controller to use in order
to actually control the CC1200 chip.
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
config IEEE802154_CC1200_SPI_FREQ
int "SPI system frequency"
default 0
help
kconfig: fix more help spacing issues Fix Kconfig help sections and add spacing to be consistent across all Kconfig file. In a previous run we missed a few. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-02-15 21:36:16 +08:00
This option sets the SPI controller's frequency. Beware this value
depends on the SPI controller being used and also on the system
clock.
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
config IEEE802154_CC1200_SPI_SLAVE
int "SPI slave linked to CC1200"
default 0
help
kconfig: fix more help spacing issues Fix Kconfig help sections and add spacing to be consistent across all Kconfig file. In a previous run we missed a few. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-02-15 21:36:16 +08:00
This option sets the SPI slave number SPI controller has to switch
to when dealing with CC1200 chip.
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
config IEEE802154_CC1200_GPIO_SPI_CS
bool "Manage SPI CS through a GPIO pin"
help
kconfig: fix more help spacing issues Fix Kconfig help sections and add spacing to be consistent across all Kconfig file. In a previous run we missed a few. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-02-15 21:36:16 +08:00
This option is useful if one needs to manage SPI CS through a GPIO
pin to by-pass the SPI controller's CS logic.
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
config IEEE802154_CC1200_GPIO_SPI_CS_DRV_NAME
string "GPIO driver's name to use to drive SPI CS through"
depends on IEEE802154_CC1200_GPIO_SPI_CS
help
kconfig: fix more help spacing issues Fix Kconfig help sections and add spacing to be consistent across all Kconfig file. In a previous run we missed a few. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-02-15 21:36:16 +08:00
This option is mandatory to set which GPIO controller to use in order
to actually emulate the SPI CS.
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
config IEEE802154_CC1200_GPIO_SPI_CS_PIN
int "GPIO PIN to use to drive SPI CS through"
default 0
depends on IEEE802154_CC1200_GPIO_SPI_CS
help
kconfig: fix more help spacing issues Fix Kconfig help sections and add spacing to be consistent across all Kconfig file. In a previous run we missed a few. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-02-15 21:36:16 +08:00
This option is mandatory to set which GPIO pin to use in order
to actually emulate the SPI CS.
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
config IEEE802154_CC1200_RX_STACK_SIZE
int "Driver's internal RX thread stack size"
default 800
help
kconfig: fix more help spacing issues Fix Kconfig help sections and add spacing to be consistent across all Kconfig file. In a previous run we missed a few. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-02-15 21:36:16 +08:00
This option sets the driver's stack size for its internal RX thread.
The default value should be sufficient, but in case it proves to be
a too little one, this option makes it easy to play with the size.
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
config IEEE802154_CC1200_INIT_PRIO
int "CC1200 initialization priority"
default 80
help
kconfig: fix more help spacing issues Fix Kconfig help sections and add spacing to be consistent across all Kconfig file. In a previous run we missed a few. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-02-15 21:36:16 +08:00
Set the initialization priority number. Do not mess with it unless
you know what you are doing. Beware cc1200 requires gpio and spi to
be ready first (and sometime gpio should be the very first as spi
might need it too). And of course it has to start before the net stack.
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
config IEEE802154_CC1200_RANDOM_MAC
bool "Random MAC address"
default y
help
kconfig: fix more help spacing issues Fix Kconfig help sections and add spacing to be consistent across all Kconfig file. In a previous run we missed a few. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-02-15 21:36:16 +08:00
Generate a random MAC address dynamically.
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
if ! IEEE802154_CC1200_RANDOM_MAC
config IEEE802154_CC1200_MAC4
hex "MAC Address Byte 4"
default 0
drivers: Replace ff hex constants with 0xff This makes it easier to distinguish them from "true" undefined symbols. Internally, all int/hex literals are treated as undefined symbols, which always get their name as their value. The C tools work the same way. The plan is to turn references to undefined Kconfig symbols into an error later. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-06-01 12:15:55 +08:00
range 0 0xff
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
help
kconfig: fix more help spacing issues Fix Kconfig help sections and add spacing to be consistent across all Kconfig file. In a previous run we missed a few. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-02-15 21:36:16 +08:00
This is the byte 4 of the MAC address.
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
config IEEE802154_CC1200_MAC5
hex "MAC Address Byte 5"
default 0
drivers: Replace ff hex constants with 0xff This makes it easier to distinguish them from "true" undefined symbols. Internally, all int/hex literals are treated as undefined symbols, which always get their name as their value. The C tools work the same way. The plan is to turn references to undefined Kconfig symbols into an error later. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-06-01 12:15:55 +08:00
range 0 0xff
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
help
kconfig: fix more help spacing issues Fix Kconfig help sections and add spacing to be consistent across all Kconfig file. In a previous run we missed a few. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-02-15 21:36:16 +08:00
This is the byte 5 of the MAC address.
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
config IEEE802154_CC1200_MAC6
hex "MAC Address Byte 6"
default 0
drivers: Replace ff hex constants with 0xff This makes it easier to distinguish them from "true" undefined symbols. Internally, all int/hex literals are treated as undefined symbols, which always get their name as their value. The C tools work the same way. The plan is to turn references to undefined Kconfig symbols into an error later. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-06-01 12:15:55 +08:00
range 0 0xff
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
help
kconfig: fix more help spacing issues Fix Kconfig help sections and add spacing to be consistent across all Kconfig file. In a previous run we missed a few. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-02-15 21:36:16 +08:00
This is the byte 6 of the MAC address.
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
config IEEE802154_CC1200_MAC7
hex "MAC Address Byte 7"
default 0
drivers: Replace ff hex constants with 0xff This makes it easier to distinguish them from "true" undefined symbols. Internally, all int/hex literals are treated as undefined symbols, which always get their name as their value. The C tools work the same way. The plan is to turn references to undefined Kconfig symbols into an error later. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-06-01 12:15:55 +08:00
range 0 0xff
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
help
kconfig: fix more help spacing issues Fix Kconfig help sections and add spacing to be consistent across all Kconfig file. In a previous run we missed a few. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-02-15 21:36:16 +08:00
This is the byte 7 of the MAC address.
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
endif # IEEE802154_CC1200_RANDOM_MAC
config IEEE802154_CC1200_XOSC
int "Value of the Crystal oscillator in kHz"
default 40000
help
kconfig: fix more help spacing issues Fix Kconfig help sections and add spacing to be consistent across all Kconfig file. In a previous run we missed a few. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-02-15 21:36:16 +08:00
This sets the XOSC value, it must be between 38400 and 40000.
This value should follow what has been set in the RF settings via
SmartRF tool. Do not touch this unless you know what you are doing.
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
config IEEE802154_CC1200_RF_PRESET
bool "Use TI CC1200 RF pre-sets"
default y
choice
prompt "TI CC1200 RF preset"
default IEEE802154_CC1200_RF_SET_0
depends on IEEE802154_CC1200_RF_PRESET
help
kconfig: fix more help spacing issues Fix Kconfig help sections and add spacing to be consistent across all Kconfig file. In a previous run we missed a few. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-02-15 21:36:16 +08:00
Set the RF preset you want to use.
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
config IEEE802154_CC1200_RF_SET_0
bool "868MHz - 50Kbps - 2-GFSK - IEEE 802.15.4g compliant - ETSI"
config IEEE802154_CC1200_RF_SET_1
bool "920MHz - 50Kbps - 2-GFSK - IEEE 802.15.4g compliant - ARIB"
config IEEE802154_CC1200_RF_SET_2
doc: fix misspellings in Kconfig files Fix misspellings in Kconfig files used for configuration docs. Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
2018-01-31 03:31:06 +08:00
bool "434MHz - 50Kbps - 2-GFSK - IEEE 802.15.4g compliant - ETSI"
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
endchoice
config IEEE802154_CC1200_CCA_THRESHOLD
int "Value in dbm of the CCA threshold"
default -91
help
kconfig: fix more help spacing issues Fix Kconfig help sections and add spacing to be consistent across all Kconfig file. In a previous run we missed a few. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-02-15 21:36:16 +08:00
Set the CCA threshold. See datasheet's AGC_CS_THR register for
more information. Do not touch this unless you know what you are doing.
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
config IEEE802154_CC1200_RSSI_OFFSET
int "Value in dbm of the RSSI offset"
default -81
help
kconfig: fix more help spacing issues Fix Kconfig help sections and add spacing to be consistent across all Kconfig file. In a previous run we missed a few. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-02-15 21:36:16 +08:00
Set the gain adjustment. See datasheet's AGC_GAIN_ADJUST register for
more information. Do not touch this unless you know what you are doing.
drivers/ieee802154: Add support for Sub-GHz TI CC1200 chip CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470, 868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g). Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g' version support in the Soft-MAC will follow later. The chip itself is closer to a bare metal radio modem than to a usual 15.4 chip: up to the user to provide the right RF settings for the carrier band. Such settings can be generaten through TI's SmartRF tool. Hopefully, for channel selection, this driver will be clever enough to compute the proper register change without any special input from the user. This will work for all the bands supported by the chip. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-07-05 22:56:49 +08:00
# Do no touch below settings unless you know what you are doing
config IEEE802154_CC1200_SETTLING_CFG
hex
default 0x03
config IEEE802154_CC1200_PKTCFG0
hex
default 0x20
config IEEE802154_CC1200_PKTCFG1
hex
default 0x03
config IEEE802154_CC1200_PKTCFG2
hex
default 0x00
config IEEE802154_CC1200_RFEND_CFG1
hex
default 0x3F
config IEEE802154_CC1200_RFEND_CFG0
hex
default 0x00
endif # IEEE802154_CC1200