zephyr/boards/croxel/croxel_cx1825/croxel_cx1825_nrf52840.dts

/*
 * Copyright (c) 2024 Luis Ubieda
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/dts-v1/;
#include <nordic/nrf52840_qiaa.dtsi>
#include "croxel_cx1825_nrf52840-pinctrl.dtsi"
#include <zephyr/dt-bindings/input/input-event-codes.h>

/ {
	model = "Croxel CX1825 NRF52840";
	compatible = "croxel,cx1825-nrf52840";

	chosen {
		zephyr,sram = &sram0;
		zephyr,flash = &flash0;
		zephyr,code-partition = &slot0_partition;
		zephyr,console = &cdc_acm_0;
		zephyr,shell-uart = &cdc_acm_0;
	};

	leds {
		compatible = "gpio-leds";
		led0: led_0 {
			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
			label = "Red LED";
		};
		led1: led_1 {
			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
			label = "Green LED";
		};
	};

	buttons {
		compatible = "gpio-keys";
		button0: button_0 {
			gpios = <&gpio0 16 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "Push button switch 0";
			zephyr,code = <INPUT_KEY_0>;
		};
	};

	/* These aliases are provided for compatibility with samples */
	aliases {
		led0 = &led0;
		led1 = &led1;
		sw0 = &button0;
		bootloader-led0 = &led0;
		mcuboot-button0 = &button0;
		mcuboot-led0 = &led0;
		watchdog0 = &wdt0;
	};
};

&adc {
	status = "okay";
};

&uicr {
	gpio-as-nreset;
};

&gpiote {
	status = "okay";
};

&gpio0 {
	status = "okay";
};

&gpio1 {
	status = "okay";
};

&pwm0 {
	status = "okay";
	pinctrl-0 = <&pwm0_default>;
	pinctrl-1 = <&pwm0_sleep>;
	pinctrl-names = "default", "sleep";
};

&i2c0 {
	compatible = "nordic,nrf-twi";
	status = "okay";
	pinctrl-0 = <&i2c0_default>;
	pinctrl-1 = <&i2c0_sleep>;
	pinctrl-names = "default", "sleep";

	hts221: hts221@5f {
		compatible = "st,hts221";
		status = "okay";
		reg = <0x5f>;
		drdy-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
	};

	lps22hb: lps22hb-press@5c {
		compatible = "st,lps22hb-press";
		status = "okay";
		reg = <0x5c>;
	};

	apds9960: apds9960@39 {
		compatible = "avago,apds9960";
		status = "okay";
		reg = <0x39>;
		int-gpios = <&gpio0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
	};

	lis3dh: lis3dh@18 {
		compatible = "st,lis3dh", "st,lis2dh";
		status = "okay";
		reg = <0x18>;
		irq-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
	};
};

zephyr_udc0: &usbd {
	compatible = "nordic,nrf-usbd";
	status = "okay";

	cdc_acm_0: cdc_acm_0 {
		compatible = "zephyr,cdc-acm-uart";
	};
};

&flash0 {

	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		boot_partition: partition@0 {
			label = "mcuboot";
			reg = <0x00000000 0x0000C000>;
		};
		slot0_partition: partition@c000 {
			label = "image-0";
			reg = <0x0000C000 0x00076000>;
		};
		slot1_partition: partition@82000 {
			label = "image-1";
			reg = <0x00082000 0x00076000>;
		};

		/*
		 * Storage partition will be used by FCB/LittleFS/NVS
		 * if enabled.
		 */
		storage_partition: partition@f8000 {
			label = "storage";
			reg = <0x000f8000 0x00008000>;
		};
	};
};