OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/boards/arc/em_starterkit/support/openocd.cfg

19 lines
597 B
INI
Raw Normal View History

boards: Update arc em_starterkit support from 2.2 to 2.3 Here are the main changes: * board: Update EMSK onboard resources such as Button, Switch and LEDs + update soc.h for em7d, em9d, em11d + update board.h for em_starterkit board * arc: Add floating point support and code density support + add kconfig configuration + add compiler options + add register definitions, marcos, assembly codes + fixes in existing codes and configurations. * arc: Update detailed board configurations for cores of emsk 2.3 * script: Provide arc_debugger.sh for debugging em_starterkit board + make BOARD=em_starterkit debug This will start openocd server for emsk, and arc gdb will connect to this debug server, user can run `continue` command if user just want to run the application, or other commands if debugging needed. + make BOARD=em_starterkit debugserver This will start an openocd debugger server for emsk, and user can connect to this debugserver using arc gdb and do what they want to. + make BOARD=em_starterkit flash This will download the zephyr application elf file to emsk, and run it. Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
2017-05-17 15:18:51 +08:00
# Configure JTAG cable
# EM Starter Kit has built-in FT2232 chip, which is similar to Digilent HS-1.
source [find interface/ftdi/digilent-hs1.cfg]
arc: Adding ARC EM Starter Kit board support Board support for the ARC EM Starter Kit provides for a board that can select one of two SOCs. The EM9D and EM11D commits will be done separately to expidite review. Also submitted here is doc/board/em_starterkit.rst to explain details about this Zephyr board choice. Change-Id: Icd9fac045c700ad8dcb95161fdd63c130f665778 Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
2016-05-21 12:23:34 +08:00
board: arc: Enable selection of FTDI instance by its serial number To be used in setups with multiple boards attached to the same one host we need to have an ability to specify precisely which JTAG probe to use for a particular board. This is done by passing "ftdi_serial XXX" command to OpenOCD. And the serial ("XXX") is supposed to be passed from higher level, typically via west's options. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-02-07 15:03:27 +08:00
# Only specify FTDI serial number if it is specified via
# "set _ZEPHYR_BOARD_SERIAL 12345" before reading this script
if { [info exists _ZEPHYR_BOARD_SERIAL] } {
ftdi_serial $_ZEPHYR_BOARD_SERIAL
}
boards: Update arc em_starterkit support from 2.2 to 2.3 Here are the main changes: * board: Update EMSK onboard resources such as Button, Switch and LEDs + update soc.h for em7d, em9d, em11d + update board.h for em_starterkit board * arc: Add floating point support and code density support + add kconfig configuration + add compiler options + add register definitions, marcos, assembly codes + fixes in existing codes and configurations. * arc: Update detailed board configurations for cores of emsk 2.3 * script: Provide arc_debugger.sh for debugging em_starterkit board + make BOARD=em_starterkit debug This will start openocd server for emsk, and arc gdb will connect to this debug server, user can run `continue` command if user just want to run the application, or other commands if debugging needed. + make BOARD=em_starterkit debugserver This will start an openocd debugger server for emsk, and user can connect to this debugserver using arc gdb and do what they want to. + make BOARD=em_starterkit flash This will download the zephyr application elf file to emsk, and run it. Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
2017-05-17 15:18:51 +08:00
# EM11D reportedly requires 5 MHz. Other cores and board can work faster.
adapter_khz 5000
arc: Adding ARC EM Starter Kit board support Board support for the ARC EM Starter Kit provides for a board that can select one of two SOCs. The EM9D and EM11D commits will be done separately to expidite review. Also submitted here is doc/board/em_starterkit.rst to explain details about this Zephyr board choice. Change-Id: Icd9fac045c700ad8dcb95161fdd63c130f665778 Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
2016-05-21 12:23:34 +08:00
boards: Update arc em_starterkit support from 2.2 to 2.3 Here are the main changes: * board: Update EMSK onboard resources such as Button, Switch and LEDs + update soc.h for em7d, em9d, em11d + update board.h for em_starterkit board * arc: Add floating point support and code density support + add kconfig configuration + add compiler options + add register definitions, marcos, assembly codes + fixes in existing codes and configurations. * arc: Update detailed board configurations for cores of emsk 2.3 * script: Provide arc_debugger.sh for debugging em_starterkit board + make BOARD=em_starterkit debug This will start openocd server for emsk, and arc gdb will connect to this debug server, user can run `continue` command if user just want to run the application, or other commands if debugging needed. + make BOARD=em_starterkit debugserver This will start an openocd debugger server for emsk, and user can connect to this debugserver using arc gdb and do what they want to. + make BOARD=em_starterkit flash This will download the zephyr application elf file to emsk, and run it. Signed-off-by: Huaqi Fang <huaqi.fang@synopsys.com>
2017-05-17 15:18:51 +08:00
# ARCs support only JTAG.
transport select jtag
# Configure FPGA. This script supports both LX45 and LX150.
board: arc: Enable selection of FTDI instance by its serial number To be used in setups with multiple boards attached to the same one host we need to have an ability to specify precisely which JTAG probe to use for a particular board. This is done by passing "ftdi_serial XXX" command to OpenOCD. And the serial ("XXX") is supposed to be passed from higher level, typically via west's options. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-02-07 15:03:27 +08:00
source [find target/snps_em_sk_fpga.cfg]