zephyr/boards/arm/nucleo_f401re/Kconfig.defconfig

# Kconfig - NUCLEO-64 F401RE board configuration
#
# Copyright (c) 2016 Linaro Limited.
#
# SPDX-License-Identifier: Apache-2.0
#

if BOARD_NUCLEO_F401RE

config BOARD
	default "nucleo_f401re"

if UART_CONSOLE

config UART_2
	default y

endif # UART_CONSOLE

if I2C

config I2C_1
	default y

endif # I2C

if SPI

config SPI_1
	default y

config SPI_2
	default y

config SPI_STM32_INTERRUPT
	default y

endif # SPI

if PWM

config PWM_STM32_2
	default y

endif # PWM

endif # BOARD_NUCLEO_F401RE
boards: nucleo_f401re: add new board Add configuration for Nucleo-64 F410RE board. Change-Id: I88b06d87f0fc62b941241cc2f374b8541de86e00 Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2016-08-11 11:35:41 +08:00			`# Kconfig - NUCLEO-64 F401RE board configuration`
			`#`
			`# Copyright (c) 2016 Linaro Limited.`
			`#`
license: Replace Apache boilerplate with SPDX tag Replace the existing Apache 2.0 boilerplate header with an SPDX tag throughout the zephyr code tree. This patch was generated via a script run over the master branch. Also updated doc/porting/application.rst that had a dependency on line numbers in a literal include. Manually updated subsys/logging/sys_log.c that had a malformed header in the original file. Also cleanup several cases that already had a SPDX tag and we either got a duplicate or missed updating. Jira: ZEP-1457 Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c Signed-off-by: David B. Kinder <david.b.kinder@intel.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2017-01-19 09:01:01 +08:00			`# SPDX-License-Identifier: Apache-2.0`
boards: nucleo_f401re: add new board Add configuration for Nucleo-64 F410RE board. Change-Id: I88b06d87f0fc62b941241cc2f374b8541de86e00 Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2016-08-11 11:35:41 +08:00			`#`

			`if BOARD_NUCLEO_F401RE`

			`config BOARD`
boards: defconfig: Consistently quote string defaults In preparation for introducing a warning. Unquoted string defaults work through a quirk of Kconfig (undefined symbols get their name as their string value), but look confusing. It's done inconsistently now too. Suggested by Kumar Gala. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> 2018-05-26 02:56:38 +08:00			`default "nucleo_f401re"`
boards: nucleo_f401re: add new board Add configuration for Nucleo-64 F410RE board. Change-Id: I88b06d87f0fc62b941241cc2f374b8541de86e00 Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2016-08-11 11:35:41 +08:00
boards: stm32f4: Clean up driver generic flags Clean up driver generic flags from boards' _defconfig files Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com> 2017-12-29 02:11:11 +08:00			`if UART_CONSOLE`

drivers/serial: stm32: Modify Kconfig instance flags STM32 uart Kconfig instance flags were not following same naming scheme than other drivers (i2c, spi, ..) Update driver to use UART_X instead of UART_STM32_PORT_X Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org> 2018-12-14 23:56:04 +08:00			`config UART_2`
boards: stm32f4: Clean up driver generic flags Clean up driver generic flags from boards' _defconfig files Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com> 2017-12-29 02:11:11 +08:00			`default y`

			`endif # UART_CONSOLE`

			`if I2C`

			`config I2C_1`
			`default y`

			`endif # I2C`

boards: arm: STM32 boards use DT to configure SPI Configure SPI using DT for the following STM32 boards: 96b_neonkey nucleo_f091rc nucleo_f334r8 nucleo_f401re nucleo_l432kc nucleo_l476rg SPI nodes in <board>.dts file are populated matching boards existing pinmux default configuration and enabled in Kconfig.defconfig if SPI is enabled. For nucleo_l476rg board SPI2 and SPI3 nodes are not yet added, because of missing pinmux defines. Fixes #5836 Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com> 2018-01-28 09:37:58 +08:00			`if SPI`

			`config SPI_1`
			`default y`

			`config SPI_2`
			`default y`

			`config SPI_STM32_INTERRUPT`
			`default y`

			`endif # SPI`

boards: stm32f4: Clean up driver generic flags Clean up driver generic flags from boards' _defconfig files Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com> 2017-12-29 02:11:11 +08:00			`if PWM`

			`config PWM_STM32_2`
			`default y`

			`endif # PWM`

boards: nucleo_f401re: add new board Add configuration for Nucleo-64 F410RE board. Change-Id: I88b06d87f0fc62b941241cc2f374b8541de86e00 Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2016-08-11 11:35:41 +08:00			`endif # BOARD_NUCLEO_F401RE`