OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/soc/x86/apollo_lake/linker.ld

39 lines
1.0 KiB
Plaintext
Raw Normal View History

arch/x86/soc: add SoC configuration for Apollo Lake This adds the SoC configuration for Apollo Lake. This is based on the Atom configuration. Origin: Original Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2018-07-17 09:37:14 +08:00
/*
* Copyright (c) 2011-2014, Wind River Systems, Inc.
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <autoconf.h>
#include <generated_dts_board.h>
/* physical address where the kernel is loaded */
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define PHYS_LOAD_ADDR DT_PHYS_LOAD_ADDR
arch/x86/soc: add SoC configuration for Apollo Lake This adds the SoC configuration for Apollo Lake. This is based on the Atom configuration. Origin: Original Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2018-07-17 09:37:14 +08:00
/* physical address of RAM */
#ifdef CONFIG_XIP
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
#define PHYS_RAM_ADDR DT_PHYS_RAM_ADDR
arch/x86/soc: add SoC configuration for Apollo Lake This adds the SoC configuration for Apollo Lake. This is based on the Atom configuration. Origin: Original Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2018-07-17 09:37:14 +08:00
#else /* !CONFIG_XIP */
#define PHYS_RAM_ADDR PHYS_LOAD_ADDR
#endif /* CONFIG_XIP */
MEMORY
{
#ifdef CONFIG_XIP
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
ROM (rx) : ORIGIN = PHYS_LOAD_ADDR, LENGTH = DT_ROM_SIZE*1K
RAM (wx) : ORIGIN = PHYS_RAM_ADDR, LENGTH = DT_RAM_SIZE*1K
arch/x86/soc: add SoC configuration for Apollo Lake This adds the SoC configuration for Apollo Lake. This is based on the Atom configuration. Origin: Original Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2018-07-17 09:37:14 +08:00
#else /* !CONFIG_XIP */
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 22:15:23 +08:00
RAM (wx) : ORIGIN = PHYS_LOAD_ADDR, LENGTH = DT_RAM_SIZE*1K
arch/x86/soc: add SoC configuration for Apollo Lake This adds the SoC configuration for Apollo Lake. This is based on the Atom configuration. Origin: Original Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2018-07-17 09:37:14 +08:00
#endif /* CONFIG_XIP */
/*
* It doesn't matter where this region goes as it is stripped from the
* final ELF image. The address doesn't even have to be valid on the
* target. However, it shouldn't overlap any other regions.
*/
IDT_LIST : ORIGIN = 2K, LENGTH = 2K
}
arch/x86: move 32-bit linker script to ia32/ directory No functional changes. All references in soc/ are updated. Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-06-29 00:41:39 +08:00
#include <arch/x86/ia32/linker.ld>
arch/x86/soc: add SoC configuration for Apollo Lake This adds the SoC configuration for Apollo Lake. This is based on the Atom configuration. Origin: Original Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2018-07-17 09:37:14 +08:00