zephyr/drivers/flash/flash_stm32_xspi.h

/*
 * Copyright (c) 2024 STMicroelectronics
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#ifndef ZEPHYR_DRIVERS_FLASH_XSPI_STM32_H_
#define ZEPHYR_DRIVERS_FLASH_XSPI_STM32_H_

/* Macro to check if any xspi device has a domain clock or more */
#define STM32_XSPI_DOMAIN_CLOCK_INST_SUPPORT(inst) \
	DT_CLOCKS_HAS_IDX(DT_INST_PARENT(inst), 1) ||
#define STM32_XSPI_INST_DEV_DOMAIN_CLOCK_SUPPORT				\
	(DT_INST_FOREACH_STATUS_OKAY(STM32_XSPI_DOMAIN_CLOCK_INST_SUPPORT) 0)

/* This symbol takes the value 1 if device instance has a domain clock in its dts */
#if STM32_XSPI_INST_DEV_DOMAIN_CLOCK_SUPPORT
#define STM32_XSPI_DOMAIN_CLOCK_SUPPORT 1
#else
#define STM32_XSPI_DOMAIN_CLOCK_SUPPORT 0
#endif

#define STM32_XSPI_FIFO_THRESHOLD       4U

/* Valid range is [0, 255] */
#define STM32_XSPI_CLOCK_PRESCALER_MIN  0U
#define STM32_XSPI_CLOCK_PRESCALER_MAX  255U
#define STM32_XSPI_CLOCK_COMPUTE(bus_freq, prescaler) ((bus_freq) / ((prescaler) + 1U))

/* Max Time value during reset or erase operation */
#define STM32_XSPI_RESET_MAX_TIME               100U
#define STM32_XSPI_BULK_ERASE_MAX_TIME          460000U
#define STM32_XSPI_SECTOR_ERASE_MAX_TIME        1000U
#define STM32_XSPI_SUBSECTOR_4K_ERASE_MAX_TIME  400U
#define STM32_XSPI_WRITE_REG_MAX_TIME           40U

/* used as default value for DTS writeoc */
#define SPI_NOR_WRITEOC_NONE 0xFF

#if STM32_XSPI_USE_DMA
/* Lookup table to set dma priority from the DTS */
static const uint32_t table_priority[] = {
	DMA_LOW_PRIORITY_LOW_WEIGHT,
	DMA_LOW_PRIORITY_MID_WEIGHT,
	DMA_LOW_PRIORITY_HIGH_WEIGHT,
	DMA_HIGH_PRIORITY,
};

/* Lookup table to set dma channel direction from the DTS */
static const uint32_t table_direction[] = {
	DMA_MEMORY_TO_MEMORY,
	DMA_MEMORY_TO_PERIPH,
	DMA_PERIPH_TO_MEMORY,
};

struct stream {
	DMA_TypeDef *reg;
	const struct device *dev;
	uint32_t channel;
	struct dma_config cfg;
	uint8_t priority;
	bool src_addr_increment;
	bool dst_addr_increment;
};
#endif /* STM32_XSPI_USE_DMA */

typedef void (*irq_config_func_t)(const struct device *dev);

struct flash_stm32_xspi_config {
	const struct stm32_pclken *pclken;
	size_t pclk_len;
	irq_config_func_t irq_config;
	size_t flash_size;
	uint32_t max_frequency;
	int data_mode; /* SPI or QSPI or OSPI */
	int data_rate; /* DTR or STR */
	const struct pinctrl_dev_config *pcfg;
#if STM32_XSPI_RESET_GPIO
	const struct gpio_dt_spec reset;
#endif /* STM32_XSPI_RESET_GPIO */
};

struct flash_stm32_xspi_data {
	/* XSPI handle is modifiable ; so part of data struct */
	XSPI_HandleTypeDef hxspi;
	struct k_sem sem;
	struct k_sem sync;
#if defined(CONFIG_FLASH_PAGE_LAYOUT)
	struct flash_pages_layout layout;
#endif
	struct jesd216_erase_type erase_types[JESD216_NUM_ERASE_TYPES];
	/* Number of bytes per page */
	uint16_t page_size;
	/* Address width in bytes */
	uint8_t address_width;
	/* Read operation dummy cycles */
	uint8_t read_dummy;
	uint32_t read_opcode;
	uint32_t write_opcode;
	enum jesd216_mode_type read_mode;
	enum jesd216_dw15_qer_type qer_type;
#if defined(CONFIG_FLASH_JESD216_API)
	/* Table to hold the jedec Read ID given by the octoFlash const */
	uint8_t jedec_id[JESD216_READ_ID_LEN];
#endif /* CONFIG_FLASH_JESD216_API */
	int cmd_status;
#if STM32_XSPI_USE_DMA
	struct stream dma_tx;
	struct stream dma_rx;
#endif /* STM32_XSPI_USE_DMA */
};

#endif /* ZEPHYR_DRIVERS_FLASH_XSPI_STM32_H_ */