OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/boards/seagate/faze/faze_defconfig

15 lines
364 B
Plaintext
Raw Normal View History

boards: arm: add FaZe board support The FaZe board can be found in the Seagate FireCuda Gaming SSD devices. A NVMe SSD and two chips are embedded: an ASMedia ASM2364 USB-to-PCIe bridge controller and a NXP LPC11U67 MCU. The former is handling the USB type-C to SSD I/Os while the latter is dedicated to the LED effects. The two chips are connected together through I2C and GPIOs. This Zephyr port is running on the LPC11U67 MCU. Here is a list of the devices connected to the LPC11U67 on a FaZe board: - ASMedia ASM2364 USB-to-PCIe bridge (I2C master on port O) - 6 RGB LEDs connected connected to a TI LP5030 LED controller (I2C device on port 1) - 1 white LED (SSD activity blinking) Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com> Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
2020-05-14 22:43:18 +08:00
#
# Seagate FireCuda Gaming SSD (FaZe) board
#
# SPDX-License-Identifier: Apache-2.0
#
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=48000000
CONFIG_GPIO=y
boards: faze: enable BUILD_OUTPUT_HEX Since commit 3124c0298707 ("cmake: flash/debug: refactor runner configuration"), BUILD_OUTPUT_HEX must be selected to pass the .hex file to the runner. It is needed when running the "west flash" command. In addition the implicit CORTEX_M_SYSTICK option is removed. Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
2020-09-13 19:34:14 +08:00
CONFIG_BUILD_OUTPUT_HEX=y
boards: arm: add FaZe board support The FaZe board can be found in the Seagate FireCuda Gaming SSD devices. A NVMe SSD and two chips are embedded: an ASMedia ASM2364 USB-to-PCIe bridge controller and a NXP LPC11U67 MCU. The former is handling the USB type-C to SSD I/Os while the latter is dedicated to the LED effects. The two chips are connected together through I2C and GPIOs. This Zephyr port is running on the LPC11U67 MCU. Here is a list of the devices connected to the LPC11U67 on a FaZe board: - ASMedia ASM2364 USB-to-PCIe bridge (I2C master on port O) - 6 RGB LEDs connected connected to a TI LP5030 LED controller (I2C device on port 1) - 1 white LED (SSD activity blinking) Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com> Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
2020-05-14 22:43:18 +08:00
CONFIG_MAIN_STACK_SIZE=512
CONFIG_ISR_STACK_SIZE=768
CONFIG_CLOCK_CONTROL_LPC11U6X_ENABLE_SRAM1=y
CONFIG_CLOCK_CONTROL_LPC11U6X_ENABLE_USB_RAM=y
CONFIG_CLOCK_CONTROL_LPC11U6X_PLL_SRC_SYSOSC=y