OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/drivers/led/Kconfig

46 lines
1.1 KiB
Plaintext
Raw Normal View History

drivers: led: Add public API for LED drivers Add support for LED APIs for controlling the LED devices. This API can be used by the LED devices present on the chip and connected externally via buses like I2C, SPI etc... Following APIs are currently supported: 1. led_blink 2. led_set_brightness 3. led_on 4. led_off Driver support using these APIs will be added in subsequent patches. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2017-12-17 18:46:02 +08:00
# Copyright (c) 2018 Linaro Limited
# SPDX-License-Identifier: Apache-2.0
# Top-level configuration file for LED drivers.
menuconfig LED
drivers: kconfig: unify menuconfig title strings Unify the drivers/*/Kconfig menuconfig title strings to the format "<class> [(acronym)] [bus] drivers". Including both the full name of the driver class and an acronym makes menuconfig more user friendly as some of the acronyms are less well-known than others. It also improves Kconfig search, both via menuconfig and via the generated Kconfig documentation. Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2023-03-27 20:55:23 +08:00
bool "Light-Emitting Diode (LED) drivers"
drivers: led: Add public API for LED drivers Add support for LED APIs for controlling the LED devices. This API can be used by the LED devices present on the chip and connected externally via buses like I2C, SPI etc... Following APIs are currently supported: 1. led_blink 2. led_set_brightness 3. led_on 4. led_off Driver support using these APIs will be added in subsequent patches. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2017-12-17 18:46:02 +08:00
help
drivers: led: Add LED driver support for TI LP3943 Add support for Texas Instruments LP3943 - 16 channel LED driver. Supported blinking period: 0 to 1600ms Supported brightness value: 0 to 100% This driver supports the following APIs: 1. led_blink 2. led_set_brightness 3. led_on 4. led_off Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2017-12-17 19:02:16 +08:00
Include LED drivers in the system configuration.
drivers: led: Add public API for LED drivers Add support for LED APIs for controlling the LED devices. This API can be used by the LED devices present on the chip and connected externally via buses like I2C, SPI etc... Following APIs are currently supported: 1. led_blink 2. led_set_brightness 3. led_on 4. led_off Driver support using these APIs will be added in subsequent patches. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2017-12-17 18:46:02 +08:00
if LED
driver: led: move to new logger Move drivers to new logger and change samples enabling logging in prj.conf. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-10-09 06:10:25 +08:00
module = LED
module-str = led
source "subsys/logging/Kconfig.template.log_config"
drivers: led: Add public API for LED drivers Add support for LED APIs for controlling the LED devices. This API can be used by the LED devices present on the chip and connected externally via buses like I2C, SPI etc... Following APIs are currently supported: 1. led_blink 2. led_set_brightness 3. led_on 4. led_off Driver support using these APIs will be added in subsequent patches. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2017-12-17 18:46:02 +08:00
config LED_INIT_PRIORITY
int "LED initialization priority"
default 90
help
System initialization priority for LED drivers.
drivers: led: add shell support This patch introduces the "led" shell command. This allows to run the LED API functions (and to test the LED drivers) from the Zephyr shell. The following subcommands are supported: - on - off - get_info - set_brightness - set_color - set_channel - write_channels Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
2020-05-25 20:55:41 +08:00
config LED_SHELL
bool "LED shell"
depends on SHELL
help
Enable LED shell for testing.
drivers: led: Add LED GPIO driver Change introduces LED GPIO driver. Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
2021-04-20 17:49:32 +08:00
source "drivers/led/Kconfig.gpio"
drivers: led: ht16k33: add LED driver for Holtek HT16K33 LED driver The HT16K33 is a memory mapping, multifunction LED controller driver. The controller supports up to 128 LEDs (up to 16 rows and 8 commons) and matrix key scan circuit of up to 13x3 keys. This commit add support for the LED driver functionality of the HT16K33. Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
2019-02-19 02:49:30 +08:00
source "drivers/led/Kconfig.ht16k33"
drivers: led: Add lumissil is31fl3216a driver The IS31FL3216A is a fun light LED controller. The LED current of each channel can be set in 256 steps by adjusting the PWM duty cycle through an I2C interface. Signed-off-by: Guy Morand <guy.morand@bytesatwork.ch>
2023-03-30 17:22:52 +08:00
source "drivers/led/Kconfig.is31fl3216a"
drivers: led: Add LED driver support for TI LP3943 Add support for Texas Instruments LP3943 - 16 channel LED driver. Supported blinking period: 0 to 1600ms Supported brightness value: 0 to 100% This driver supports the following APIs: 1. led_blink 2. led_set_brightness 3. led_on 4. led_off Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2017-12-17 19:02:16 +08:00
source "drivers/led/Kconfig.lp3943"
drivers: led: lp503x: extend driver to all lp50xx devices Add support for LP5009, LP5012, LP5018 and LP5024 devices which only differ by the number of LEDs they can control. Also, update application sample to run on all these new supported devices. Based on initial work from: - Marek Janus <marek.janus@grinn-global.com> - Rico Ganahl <rico.ganahl@bytesatwork.ch> Signed-off-by: Mathieu Anquetin <mathieu.anquetin@groupe-cahors.com>
2023-06-25 06:45:59 +08:00
source "drivers/led/Kconfig.lp50xx"
drivers: led: Add LED driver support for TI LP5562 Add support for TI LP5562 I2C 4-channel LED driver. Supported blinking period: 1ms - 1000ms Supported brightness value: 0% - 100% This driver supports the entire currently available API. Signed-off-by: Johannes Hutter <johannes@proglove.de>
2018-07-19 00:16:26 +08:00
source "drivers/led/Kconfig.lp5562"
drivers: led: Add lp5569 led controller driver Add a minimal driver for the ti lp5569 led controller. The driver supports multiple instances. Commands on|off|set_brightness are supported. Signed-off-by: Jonas Remmert <j.remmert@phytec.de>
2023-05-30 05:04:48 +08:00
source "drivers/led/Kconfig.lp5569"
drivers: led: Add Onsemi ncp5623c driver The controller and the driver support two hardware configurations: - one three-channel (RGB) LED - or three single-channel LEDs Signed-off-by: Peter van der Perk <peter.vanderperk@nxp.com>
2023-07-21 23:32:44 +08:00
source "drivers/led/Kconfig.ncp5623"
drivers: led: npm1300: nPM1300 LED driver Added LED driver for nPM1300 PMIC Signed-off-by: Andy Sinclair <andy.sinclair@nordicsemi.no>
2023-05-24 15:41:25 +08:00
source "drivers/led/Kconfig.npm1300"
drivers: led: Add LED driver support for NXP PCA9633 Add support for NXP PCA9633 an I2C 4-bit LED driver. Supported blinkink period: 41ms to 10667ms Supported brightness value: 0 to 100% This driver supports the following APIs: 1. led_blink 2. led_set_brightness 3. led_on 4. led_off Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
2018-06-27 04:27:37 +08:00
source "drivers/led/Kconfig.pca9633"
drivers: led: add driver for PWM LEDs This driver supports the PWM driven LEDs. The devices are created from the DT nodes with a compatible property matching "pwm-leds". For each child node a LED is created and its "pwms" phandle's node is used to retrieve the PWM configuration: channel, period and flags. If some of this properties are missing (it is the case for some PWM controllers), then reasonable default values are used. This driver implements the following LED API methods: - led_on - led_off - led_blink - led_set_brightness Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
2020-10-20 01:50:33 +08:00
source "drivers/led/Kconfig.pwm"
drivers: led: Add LED driver support for TLC59108 Add support for TI TLC59108 an I2C 8-bit LED driver. Supported blinkink period: 41ms to 10730ms Supported brightness value: 0 to 100% This driver supports the following APIs: 1. led_blink 2. led_set_brightness 3. led_on 4. led_off This is a modified version of the NXP PCA9633 driver. Signed-off-by: John Kjellberg <kjellberg.john@gmail.com>
2021-07-24 00:14:51 +08:00
source "drivers/led/Kconfig.tlc59108"
drivers: led: Microchip XEC LED driver using BBLED controller Implement a LED driver for Microchip XEC using the breathing, blinking LED controller. The driver supports LED on, off, and blink API's. The BBLED block uses the 32768 Hz clock domain allowing the module to operate in light and deep sleep states. Blink frequency is 32768 divided by 256 * (prescale + 1) where prescale is a 12-bit value. Duty cycle is specified by an 8-bit value where 0 = full off, 127 is 50%, and 255 is full on. Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
2022-11-19 06:36:43 +08:00
source "drivers/led/Kconfig.xec"
drivers: led: added support for is31fl3733 led driver Enabled support for is31fl3733 driver. This driver supports the full LED API, and enables the following features of the is31fl3733: - individual LED dimming - individual LED enable/disable - bulk writes of LED enabled and dimming states - global LED current limit - blanking (via custom API) Signed-off-by: Daniel DeGrasse <daniel@degrasse.com>
2022-12-24 12:42:29 +08:00
source "drivers/led/Kconfig.is31fl3733"
drivers/led: add IS31FL3194 LED driver Add support for the IS31FL3194 3-channel LED driver. This driver can be configured to handle its outputs as either a single RGB LED or (up to) three independent LEDs. Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
2024-02-15 22:12:10 +08:00
source "drivers/led/Kconfig.is31fl3194"
drivers: led: Add LED driver support for TI LP3943 Add support for Texas Instruments LP3943 - 16 channel LED driver. Supported blinking period: 0 to 1600ms Supported brightness value: 0 to 100% This driver supports the following APIs: 1. led_blink 2. led_set_brightness 3. led_on 4. led_off Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2017-12-17 19:02:16 +08:00
drivers: led: Add public API for LED drivers Add support for LED APIs for controlling the LED devices. This API can be used by the LED devices present on the chip and connected externally via buses like I2C, SPI etc... Following APIs are currently supported: 1. led_blink 2. led_set_brightness 3. led_on 4. led_off Driver support using these APIs will be added in subsequent patches. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2017-12-17 18:46:02 +08:00
endif # LED