zephyr/samples/display/ili9340/README.rst

136 lines
4.2 KiB
ReStructuredText
Raw Normal View History

.. _ili9340-sample:
ILI9340 Display driver
######################
Overview
********
Every half-second, this sample application draws a color-filled rectangle in a
corner of the LCD display. The rectangle fill color cycles through red, green,
and blue on each update.
Requirements
************
- `ST NUCLEO-L476RG development board`_
- `Adafruit 2.2 inch TFT Display`_
or
- :ref:`nrf52_pca10040`
- `Seeed 2.8 inch TFT Touch Shield V2.0`_
or
- :ref:`nrf52840_pca10056`
- `Adafruit 2.8 inch TFT Touch Shield`_
Wiring
******
The NUCLEO-L476RG should be connected as follows to the Adafruit TFT display.
+------------------+-----------------+----------------+
| | NUCLEO-L476RG | | NUCLEO-L476RG | | Adafruit TFT |
| | Arduino Header | | Pin | | Pin |
+==================+=================+================+
| D3 | PB3 | SCK |
+------------------+-----------------+----------------+
| D7 | PA8 | D/C |
+------------------+-----------------+----------------+
| D8 | PA9 | RST |
+------------------+-----------------+----------------+
| D11 | PA7 | MOSI |
+------------------+-----------------+----------------+
| D12 | PA6 | MISO |
+------------------+-----------------+----------------+
| A2 | PA4 | NSS |
+------------------+-----------------+----------------+
The Seeed 2.8 inch TFT Touch Shield V2.0 should be plugged in the Arduino
header on :ref:`nrf52_pca10040`. The following pins will be connected except
the TFT reset pin. A separate wire should connect P0.21 pin to RESET pin on
the :ref:`nrf52_pca10040`.
+-------------+-------------+
| | nRF52832 | | Seeed TFT |
| | Pin | | Pin |
+=============+=============+
| P0.25 | SPI_SCK |
+-------------+-------------+
| P0.23 | SPI_MOSI |
+-------------+-------------+
| P0.24 | SPI_MISO |
+-------------+-------------+
| P0.16 | TFT_CS |
+-------------+-------------+
| P0.17 | TFT_DC |
+-------------+-------------+
| P0.21 | RESET |
+-------------+-------------+
The Adafruit 2.8 inch TFT Touch Shield should be plugged in the Arduino header
on :ref:`nrf52840_pca10056`. The following pins will be connected.
+-------------+----------------+
| | nRF52840 | | Adafruit TFT |
| | Pin | | Pin |
+=============+================+
| P1.15 | SCLK |
+-------------+----------------+
| P1.13 | MOSI |
+-------------+----------------+
| P1.14 | MISO |
+-------------+----------------+
| P1.12 | TFT_CS |
+-------------+----------------+
| P1.11 | TFT_DC |
+-------------+----------------+
Building and Running
********************
For NUCLEO-L476RG, build this sample application with the following commands:
.. zephyr-app-commands::
:zephyr-app: samples/display/ili9340
:board: nucleo_l476rg
:goals: build
:compact:
See :ref:`nucleo_l476rg_board` on how to flash the build.
For :ref:`nrf52_pca10040`, build this sample application with the following commands:
.. zephyr-app-commands::
:zephyr-app: samples/display/ili9340
:board: nrf52_pca10040
:goals: build
:compact:
See :ref:`nrf52_pca10040` on how to flash the build.
For :ref:`nrf52840_pca10056`, build this sample application with the following commands:
.. zephyr-app-commands::
:zephyr-app: samples/display/ili9340
:board: nrf52840_pca10056
:goals: build
:compact:
See :ref:`nrf52840_pca10056` on how to flash the build.
References
**********
- `ILI9340 datasheet`_
- `ILI9341 datasheet`_
.. _Adafruit 2.2 inch TFT Display: https://www.adafruit.com/product/1480
.. _ST NUCLEO-L476RG development board: http://www.st.com/en/evaluation-tools/nucleo-l476rg.html
.. _Seeed 2.8 inch TFT Touch Shield V2.0: https://www.seeedstudio.com/2-8-TFT-Touch-Shield-V2-0-p-1286.html
.. _Adafruit 2.8 inch TFT Touch Shield: https://www.adafruit.com/product/1947
.. _ILI9340 datasheet: https://cdn-shop.adafruit.com/datasheets/ILI9340.pdf
.. _ILI9341 datasheet: https://www.newhavendisplay.com/app_notes/ILI9341.pdf