OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/drivers/CMakeLists.txt

46 lines
1.6 KiB
CMake
Raw Normal View History

license: cleanup: add SPDX Apache-2.0 license identifier Update the files which contain no license information with the 'Apache-2.0' SPDX license identifier. Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of Zephyr, which is Apache version 2. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-04-06 21:08:09 +08:00
# SPDX-License-Identifier: Apache-2.0
drivers: Cmake: Add __ZEPHYR_SUPERVISOR__ macro for driver files. Normally a syscall would check the current privilege level and then decide to go to _impl_<syscall> directly or go through a _handler_<syscall>. __ZEPHYR_SUPERVISOR__ is a compiler optimization flag which will make all the system calls from the driver files directly link to the _impl_<syscall>. Thereby reducing the overhead of checking the privileges. In the previous implementation all the source files would be compiled by zephyr_source() rule. This means that zephyr_* is a catchall CMake library for source files that can be built purely with the include paths, defines, and other compiler flags that all zephyr source files uses. This states that adding one extra compiler flag for only one complete directory would fail. This limitation can be overcome by using zephyr_libray* APIs. This creates a library for the required directories and it also supports directory level properties. Hence we use zephyr_library* to create a new library with macro _ZEPHYR_SUPERVISOR_ for the optimization. Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
2018-03-28 18:06:12 +08:00
add_definitions(-D__ZEPHYR_SUPERVISOR__)
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
add_subdirectory(console)
add_subdirectory(interrupt_controller)
add_subdirectory_if_kconfig(adc)
add_subdirectory_if_kconfig(clock_control)
add_subdirectory_if_kconfig(counter)
drivers: crypto: add missing CMakeLists.txt file Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2017-11-16 17:47:58 +08:00
add_subdirectory_if_kconfig(crypto)
driver: ILI9340 LCD display driver Minimal driver for ILI9340 LCD display driver including support for adafruit 2.2" LCD display (1480) Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2017-10-06 14:34:43 +08:00
add_subdirectory_if_kconfig(display)
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
add_subdirectory_if_kconfig(dma)
add_subdirectory_if_kconfig(gpio)
add_subdirectory_if_kconfig(grove)
add_subdirectory_if_kconfig(i2c)
drivers: add missing i2s directory to CMakeLists.txt Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2017-11-17 20:47:19 +08:00
add_subdirectory_if_kconfig(i2s)
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
add_subdirectory_if_kconfig(ieee802154)
add_subdirectory_if_kconfig(ipm)
drivers: led: Add public API for LED drivers Add support for LED APIs for controlling the LED devices. This API can be used by the LED devices present on the chip and connected externally via buses like I2C, SPI etc... Following APIs are currently supported: 1. led_blink 2. led_set_brightness 3. led_on 4. led_off Driver support using these APIs will be added in subsequent patches. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2017-12-17 18:46:02 +08:00
add_subdirectory_if_kconfig(led)
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
add_subdirectory_if_kconfig(led_strip)
drivers: modem: add modem receiver (tty) driver Modem drivers need a fast buffer-based receiver for passing data back and forth from the UART to the driver. This provides an efficient configuarable driver which merely sends and receives but doesn't process the data, that's left up to the modem driver. Signed-off-by: Michael Scott <mike@foundries.io>
2018-08-02 04:01:00 +08:00
add_subdirectory_if_kconfig(modem)
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
add_subdirectory_if_kconfig(pci)
uart/ns16550, drivers/pcie: add PCI(e) support A parallel PCI implementation ("pcie") is added with features for PCIe. In particular, message-signaled interrupts (MSI) are supported, which are essential to the use of any non-trivial PCIe device. The NS16550 UART driver is modified to use pcie. pcie is a complete replacement for the old PCI support ("pci"). It is smaller, by an order of magnitude, and cleaner. Both pci and pcie can (and do) coexist in the same builds, but the intent is to rework any existing drivers that depend on pci and ultimately remove pci entirely. This patch is large, but things in mirror are smaller than they appear. Most of the modified files are configuration-related, and are changed only slightly to accommodate the modified UART driver. Deficiencies: 64-bit support is minimal. The code works fine with 64-bit capable devices, but will not cooperate with MMIO regions (or MSI targets) that have high bits set. This is not needed on any current boards, and is unlikely to be needed in the future. Only superficial changes would be required if we change our minds. The method specifying PCI endpoints in devicetree is somewhat kludgey. The "right" way would be to hang PCI devices off a topological tree; while this would be more aesthetically pleasing, I don't think it's worth the effort, given our non-standard use of devicetree. Signed-off-by: Charles E. Youse <charles.youse@intel.com>
2019-04-03 01:06:07 +08:00
add_subdirectory_if_kconfig(pcie)
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
add_subdirectory_if_kconfig(pinmux)
add_subdirectory_if_kconfig(pwm)
add_subdirectory_if_kconfig(rtc)
add_subdirectory_if_kconfig(sensor)
add_subdirectory_if_kconfig(spi)
add_subdirectory_if_kconfig(usb)
add_subdirectory_if_kconfig(watchdog)
drivers/wifi: Add files skeleton for adding WiFi drivers This will help not to collide within drivers implementations and/or avoid dependency from one driver to another one. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-12-04 20:35:34 +08:00
add_subdirectory_if_kconfig(wifi)
drivers: can: Add Kconfig for CAN driver This commit adds the Kconfig for generic CAN drivers. Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
2018-05-03 16:48:02 +08:00
add_subdirectory_if_kconfig(can)
drivers: audio: add audio to cmake system Add a CMakeLists.txt file for audio codec TLV320DAC Updated drivers/CMakeLists.txt to include audio Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
2018-07-27 00:34:39 +08:00
add_subdirectory_if_kconfig(audio)
drivers: Add hwinfo API This commit adds a new hardware info API. With this API it is possible to read out the device ID. Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
2018-12-21 18:58:41 +08:00
add_subdirectory_if_kconfig(hwinfo)
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
drivers: flash: Remove usage of zephyr_library_ifdef Phasing out the usage of this cmake macro from the drivers/flash folder. Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
2018-05-23 19:22:20 +08:00
add_subdirectory_ifdef(CONFIG_FLASH_HAS_DRIVER_ENABLED flash)
drivers: serial: Remove usage of zephyr_library_ifdef Phasing out the usage of this cmake macro from the drivers/serial folder. Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
2018-05-24 13:03:37 +08:00
add_subdirectory_ifdef(CONFIG_SERIAL_HAS_DRIVER serial)
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
add_subdirectory_ifdef(CONFIG_AIO_COMPARATOR aio)
add_subdirectory_ifdef(CONFIG_BT bluetooth)
add_subdirectory_ifdef(CONFIG_NETWORKING net)
add_subdirectory_ifdef(CONFIG_NET_L2_ETHERNET ethernet)
drivers: entropy: Remove usage of zephyr_library_ifdef Phasing out the usage of this cmake macro from the drivers/entropy folder. Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
2018-05-24 13:23:35 +08:00
add_subdirectory_ifdef(CONFIG_ENTROPY_HAS_DRIVER entropy)
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
add_subdirectory_ifdef(CONFIG_SYS_CLOCK_EXISTS timer)
drivers: neural_net: Use correct Kconfig variable The Kconfig variable for selecting neural network accelerator driver(s) was changed from NEURAL_NET to NEURAL_NET_ACCEL The CMakeLists.txt however, was not updated to use the updated variable This commit updates CMakeLists.txt to include neural_net if CONFIG_NEURAL_NET_ACCEL is defined. Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
2018-11-10 04:30:47 +08:00
add_subdirectory_ifdef(CONFIG_NEURAL_NET_ACCEL neural_net)