zephyr/samples/net/test_15_4/prj_x86.conf

CONFIG_NETWORKING=y
CONFIG_NETWORKING_WITH_LOGGING=y
CONFIG_NETWORKING_WITH_6LOWPAN=y
CONFIG_NETWORKING_WITH_15_4=y
CONFIG_NET_BUF_RX_SIZE=5
CONFIG_NET_BUF_TX_SIZE=3
CONFIG_NET_15_4_LOOPBACK_NUM=1
net: 15.4: Add 802.15.4 driver and 802.15.4 loopback radio driver Enable 802.15.4 driver that receives the IPv6 packet, does header compression on it and writes it to the 15.4 stack Tx FIFO. The 15.4 Tx fiber will pick up the header compressed IPv6 6LoWPAN packet and fragment it into suitable chunks ready to be sent to the 15.4 hw driver. The 15.4 stack Rx fiber picks 15.4 frames from 15.4 Rx FIFO (which are fed by 15.4 driver) and reassembles the all fragmented packets and uncompress the header and writes to the IP Rx FIFO. The 15.4 loopback radio driver receives the 15.4 frames and put it back to 15.4 Rx Fifo. Change-Id: I68d1c7ff6de0e8770616e574206c2091c69a28e6 Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com> Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> 2015-06-03 21:47:41 +08:00			`CONFIG_NETWORKING=y`
			`CONFIG_NETWORKING_WITH_LOGGING=y`
			`CONFIG_NETWORKING_WITH_6LOWPAN=y`
			`CONFIG_NETWORKING_WITH_15_4=y`
net: apps: Simplify 802.15.4 test application setup Instead of multiple make options etc. the test are now run directly from make. User does not need to know various command line options for setting up pipes. Change-Id: I62a56aec75c55b970b246051dccdbf458389ab8d Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> 2015-09-08 19:50:15 +08:00			`CONFIG_NET_BUF_RX_SIZE=5`
			`CONFIG_NET_BUF_TX_SIZE=3`
net: apps: Add support for CONFIG_NET_15_4_LOOPBACK_NUM Add support for CONFIG_NET_15_4_LOOPBACK_NUM in test_15_4 application. Change-Id: I57246f9db587f492cddc0d0be607b1ae4a78fbf7 Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com> 2015-10-28 22:30:44 +08:00			`CONFIG_NET_15_4_LOOPBACK_NUM=1`