OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/dts/bindings/modem/wnc,m14a2a.yaml

34 lines
634 B
YAML
Raw Normal View History

drivers: modem: add Wistron WNC-M14A2A LTE-M Modem Driver The WNC-M14A2A (LTE / LTE-M) modem is presented as an Arduino- compatible shield via AT&T's IoT Starter Kit v1.0. It was originally intended to work with the FRDM-K64F board, but in theory as long as the right pins are configured it can work with any board that supports Arduino-compatible headers. The driver utilizes the CONFIG_NET_OFFLOAD setting to avoid the normal handling of IP packets, and instead uses a socket-like UART interface to handle incoming and outgoing data. Signed-off-by: Michael Scott <mike@foundries.io>
2018-08-02 04:02:00 +08:00
# Copyright (c) 2018, Foundries.io
# SPDX-License-Identifier: Apache-2.0
yaml: Remove redundant document separators YAML document separators are needed e.g. when doing $ cat doc1.yaml doc2.yaml | <parser> For the bindings, we never parse concatenated documents. Assume we don't for any other .yaml files either. Having document separators in e.g. base.yaml makes !include a bit confusing, since the !included files are merged and not separate documents (the merging is done in Python code though, so it makes no difference for behavior). The replacement was done with $ git ls-files '*.yaml' | \ xargs sed -i -e '${/\s*\.\.\.\s*/d;}' -e 's/^\s*---\s*$//' First pattern removes ... at the end of files, second pattern clears a line with a lone --- on it. Some redundant blank lines at the end of files were cleared with $ git ls-files '*.yaml' | xargs sed -i '${/^\s*$/d}' This is more about making sure people can understand why every part of a binding is there than about removing some text. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-06-19 06:03:49 +08:00
dts: bindings: Remove 'title:' and put all info. into 'description:' Add any useful information from 'title:' to the 'description:' strings (e.g. explanations of acronyms), and remove 'title:' as well as any copy-pasted "this binding gives a ..." boilerplate. Also clean some description strings up a bit. Some other things could probably be cleaned up (replacing 'GPIO node' with 'GPIO controller' on controllers for consistency, for example), but I kept things close to the original to avoid accidentally messing up. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-11-19 15:39:11 +08:00
description: WNC-M14A2A LTE-M modem
drivers: modem: add Wistron WNC-M14A2A LTE-M Modem Driver The WNC-M14A2A (LTE / LTE-M) modem is presented as an Arduino- compatible shield via AT&T's IoT Starter Kit v1.0. It was originally intended to work with the FRDM-K64F board, but in theory as long as the right pins are configured it can work with any board that supports Arduino-compatible headers. The driver utilizes the CONFIG_NET_OFFLOAD setting to avoid the normal handling of IP packets, and instead uses a socket-like UART interface to handle incoming and outgoing data. Signed-off-by: Michael Scott <mike@foundries.io>
2018-08-02 04:02:00 +08:00
scripts: dts: Simplify and improve 'compatible' matching Instead of properties: compatible: constraint: "foo" , just have compatible: "foo" at the top level of the binding. For backwards compatibility, the old 'properties: compatible: ...' form is still accepted for now, and is treated the same as a single-element 'compatible:'. The old syntax was inspired by dt-schema (though it isn't dt-schema-compatible), which is in turn a thin wrapper around json-schema (the idea is to transform .dts files into YAML and then verify them). Maybe the idea was to gradually switch the syntax over to dt-schema and then be able to use unmodified dt-schema bindings, but dt-schema is really a different kind of tool (a completely standalone linter), and works very differently from our stuff (see schemas/dt-core.yaml in the dt-schema repo to get an idea of just how differently). Better to keep it simple. This commit also piggybacks some clarifications to the binding template re. '#cells:'. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-20 02:32:25 +08:00
compatible: "wnc,m14a2a"
dts/bindings: Convert bindings to new include syntax Convert from: inherits: !include spi-device.yaml to: include: spi-device.yaml Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-08-22 07:10:12 +08:00
include: uart-device.yaml
drivers: modem: add Wistron WNC-M14A2A LTE-M Modem Driver The WNC-M14A2A (LTE / LTE-M) modem is presented as an Arduino- compatible shield via AT&T's IoT Starter Kit v1.0. It was originally intended to work with the FRDM-K64F board, but in theory as long as the right pins are configured it can work with any board that supports Arduino-compatible headers. The driver utilizes the CONFIG_NET_OFFLOAD setting to avoid the normal handling of IP packets, and instead uses a socket-like UART interface to handle incoming and outgoing data. Signed-off-by: Michael Scott <mike@foundries.io>
2018-08-02 04:02:00 +08:00
properties:
yamllint: indentation: fix dts/bindings/ Fix the YAML files indentation for files in dts/bindings/. Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
2023-01-04 03:21:25 +08:00
mdm-boot-mode-sel-gpios:
type: phandle-array
required: true
drivers: modem: add Wistron WNC-M14A2A LTE-M Modem Driver The WNC-M14A2A (LTE / LTE-M) modem is presented as an Arduino- compatible shield via AT&T's IoT Starter Kit v1.0. It was originally intended to work with the FRDM-K64F board, but in theory as long as the right pins are configured it can work with any board that supports Arduino-compatible headers. The driver utilizes the CONFIG_NET_OFFLOAD setting to avoid the normal handling of IP packets, and instead uses a socket-like UART interface to handle incoming and outgoing data. Signed-off-by: Michael Scott <mike@foundries.io>
2018-08-02 04:02:00 +08:00
yamllint: indentation: fix dts/bindings/ Fix the YAML files indentation for files in dts/bindings/. Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
2023-01-04 03:21:25 +08:00
mdm-power-gpios:
type: phandle-array
required: true
drivers: modem: add Wistron WNC-M14A2A LTE-M Modem Driver The WNC-M14A2A (LTE / LTE-M) modem is presented as an Arduino- compatible shield via AT&T's IoT Starter Kit v1.0. It was originally intended to work with the FRDM-K64F board, but in theory as long as the right pins are configured it can work with any board that supports Arduino-compatible headers. The driver utilizes the CONFIG_NET_OFFLOAD setting to avoid the normal handling of IP packets, and instead uses a socket-like UART interface to handle incoming and outgoing data. Signed-off-by: Michael Scott <mike@foundries.io>
2018-08-02 04:02:00 +08:00
yamllint: indentation: fix dts/bindings/ Fix the YAML files indentation for files in dts/bindings/. Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
2023-01-04 03:21:25 +08:00
mdm-keep-awake-gpios:
type: phandle-array
required: true
drivers: modem: add Wistron WNC-M14A2A LTE-M Modem Driver The WNC-M14A2A (LTE / LTE-M) modem is presented as an Arduino- compatible shield via AT&T's IoT Starter Kit v1.0. It was originally intended to work with the FRDM-K64F board, but in theory as long as the right pins are configured it can work with any board that supports Arduino-compatible headers. The driver utilizes the CONFIG_NET_OFFLOAD setting to avoid the normal handling of IP packets, and instead uses a socket-like UART interface to handle incoming and outgoing data. Signed-off-by: Michael Scott <mike@foundries.io>
2018-08-02 04:02:00 +08:00
yamllint: indentation: fix dts/bindings/ Fix the YAML files indentation for files in dts/bindings/. Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
2023-01-04 03:21:25 +08:00
mdm-reset-gpios:
type: phandle-array
required: true
drivers: modem: add Wistron WNC-M14A2A LTE-M Modem Driver The WNC-M14A2A (LTE / LTE-M) modem is presented as an Arduino- compatible shield via AT&T's IoT Starter Kit v1.0. It was originally intended to work with the FRDM-K64F board, but in theory as long as the right pins are configured it can work with any board that supports Arduino-compatible headers. The driver utilizes the CONFIG_NET_OFFLOAD setting to avoid the normal handling of IP packets, and instead uses a socket-like UART interface to handle incoming and outgoing data. Signed-off-by: Michael Scott <mike@foundries.io>
2018-08-02 04:02:00 +08:00
yamllint: indentation: fix dts/bindings/ Fix the YAML files indentation for files in dts/bindings/. Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
2023-01-04 03:21:25 +08:00
mdm-shld-trans-ena-gpios:
type: phandle-array
required: true
drivers: modem: add Wistron WNC-M14A2A LTE-M Modem Driver The WNC-M14A2A (LTE / LTE-M) modem is presented as an Arduino- compatible shield via AT&T's IoT Starter Kit v1.0. It was originally intended to work with the FRDM-K64F board, but in theory as long as the right pins are configured it can work with any board that supports Arduino-compatible headers. The driver utilizes the CONFIG_NET_OFFLOAD setting to avoid the normal handling of IP packets, and instead uses a socket-like UART interface to handle incoming and outgoing data. Signed-off-by: Michael Scott <mike@foundries.io>
2018-08-02 04:02:00 +08:00
yamllint: indentation: fix dts/bindings/ Fix the YAML files indentation for files in dts/bindings/. Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
2023-01-04 03:21:25 +08:00
mdm-send-ok-gpios:
type: phandle-array
description: UART RTS pin if no HW flow control (set to always enabled)