OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/drivers/serial/CMakeLists.txt

25 lines
993 B
CMake
Raw Normal View History

drivers: serial: Add Altera shim driver for JTAG UART soft IP Delete the native UART JTAG driver as we will be reusing the Altera's HAL driver. Add the shim driver support for Altera HAL's JTAG UART soft IP. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
2017-11-15 06:28:18 +08:00
zephyr_sources_ifdef(CONFIG_UART_ALTERA_JTAG uart_altera_jtag_hal.c)
serial: Add imx uart driver shim Adds a shim layer around the imx uart driver to adapt it to the Zephyr serial interface. Modem mode was introduce to control it as DCE and DTE and can be configured in the device tree: modem-mode: type: int category: required description: Set the UART Port to modem mode 0 (dce) 1 (dte) generation: define For now only the UART 2 was tested. Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-03-15 02:36:53 +08:00
zephyr_sources_if_kconfig(uart_imx.c)
cmake: Fix drivers/serial/CMakeLists.txt to build uart_cc32xx.c Previously, a typo prevented UART from working for any program built for BOARD=cc3220sf_launchxl. Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
2017-11-10 09:02:03 +08:00
zephyr_sources_if_kconfig(uart_cc32xx.c)
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
zephyr_sources_if_kconfig(uart_cmsdk_apb.c)
cmake: Added missing zephyr_sources() calls for esp32 drivers Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-11-14 22:57:20 +08:00
zephyr_sources_if_kconfig(uart_esp32.c)
drivers: serial: Add missing FE310 UART driver reference to CMakeLists This commit adds a missing reference to uart_fe310.c to CMakeLists.txt. Signed-off-by: Peter Gielda <pgielda@antmicro.com>
2018-03-28 04:29:34 +08:00
zephyr_sources_if_kconfig(uart_fe310.c)
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
zephyr_sources_if_kconfig(uart_gecko.c)
zephyr_sources_if_kconfig(uart_mcux.c)
zephyr_sources_if_kconfig(uart_mcux_lpuart.c)
cmake: Fix console could not work on board frdm_kl25z The CMakeLists lost the config for uart_mcux_lpsci.c, which is the console driver for board frdm_kl25z. So just add "uart_mcux_lpsci.c" into drivers/serial/CMakeLists.txt to make it work. Signed-off-by: Jason Wang <jason.yanping.wang@hotmail.com>
2018-01-22 09:57:08 +08:00
zephyr_sources_if_kconfig(uart_mcux_lpsci.c)
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
zephyr_sources_if_kconfig(uart_msp432p4xx.c)
zephyr_sources_if_kconfig(uart_nrf5.c)
zephyr_sources_if_kconfig(uart_ns16550.c)
zephyr_sources_if_kconfig(uart_nsim.c)
zephyr_sources_if_kconfig(uart_qmsi.c)
zephyr_sources_if_kconfig(uart_riscv_qemu.c)
zephyr_sources_if_kconfig(uart_sam.c)
drivers: serial: fix CMakeLists for Atmel SoCs - added missing usart_sam.c entry - removed outdated uart_atmel_sam3.c entry Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2017-11-14 20:10:17 +08:00
zephyr_sources_if_kconfig(usart_sam.c)
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
zephyr_sources_if_kconfig(uart_stellaris.c)
zephyr_sources_if_kconfig(uart_stm32.c)
serial: add a serial driver for the SAM0 family. Signed-off-by: Michael Hope <mlhx@google.com>
2017-11-18 18:59:08 +08:00
zephyr_sources_if_kconfig(uart_sam0.c)
lpc: Add usart shim driver for lpcxpresso54114 Add usart-yaml in dts. Build fsl_lpc_usart and fsl_lpc_flexcomm in ext/hal/nxp/mcux/drivers/Makefile. Only polling mode is implemented in usart now. Interrupt can be added in future. Signed-off-by: Shiksha Patel <shiksha.patel@nxp.com> Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-07-26 19:53:02 +08:00
zephyr_sources_if_kconfig(usart_mcux_lpc.c)
Introduce cmake-based rewrite of KBuild Introducing CMake is an important step in a larger effort to make Zephyr easy to use for application developers working on different platforms with different development environment needs. Simplified, this change retains Kconfig as-is, and replaces all Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild offers is replaced by a set of CMake extentions. These extentions have either provided simple one-to-one translations of KBuild features or introduced new concepts that replace KBuild concepts. This is a breaking change for existing test infrastructure and build scripts that are maintained out-of-tree. But for FW itself, no porting should be necessary. For users that just want to continue their work with minimal disruption the following should suffice: Install CMake 3.8.2+ Port any out-of-tree Makefiles to CMake. Learn the absolute minimum about the new command line interface: $ cd samples/hello_world $ mkdir build && cd build $ cmake -DBOARD=nrf52_pca10040 .. $ cd build $ make PR: zephyrproject-rtos#4692 docs: http://docs.zephyrproject.org/getting_started/getting_started.html Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
2017-10-27 21:43:34 +08:00
zephyr_sources_ifdef(CONFIG_USERSPACE uart_handlers.c)