OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/boards/arm/efr32mg_sltb004a/Kconfig.defconfig

57 lines
659 B
Plaintext
Raw Normal View History

boards: Add Silabs EFR32MG-SLTB004A (Thunderboard Sense 2) support The EFR32™ Mighty Gecko Starter Kit EFR32MG-SLTB004A (a.k.a Thunderboard Sense 2) contains a MCU from the EFR32MG12P family built on ARM® Cortex®-M4F processor with low power capabilities. There is an On-Board J-Link Debugger that presents a virtual COM port for general purpose application serial data transfer with this interface and a Mass Storage for firmware flashing. Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-10-31 04:56:31 +08:00
# Kconfig - EFR32MG SLTB004A board
#
# Copyright (c) 2018, Diego Sueiro
#
# SPDX-License-Identifier: Apache-2.0
#
if BOARD_EFR32MG_SLTB004A
config BOARD
default "efr32mg_sltb004a"
config CMU_HFXO_FREQ
default 40000000
config CMU_LFXO_FREQ
default 32768
if GPIO_GECKO
config GPIO_GECKO_PORTA
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y
boards: Add Silabs EFR32MG-SLTB004A (Thunderboard Sense 2) support The EFR32™ Mighty Gecko Starter Kit EFR32MG-SLTB004A (a.k.a Thunderboard Sense 2) contains a MCU from the EFR32MG12P family built on ARM® Cortex®-M4F processor with low power capabilities. There is an On-Board J-Link Debugger that presents a virtual COM port for general purpose application serial data transfer with this interface and a Mass Storage for firmware flashing. Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-10-31 04:56:31 +08:00
config GPIO_GECKO_PORTD
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y
boards: Add Silabs EFR32MG-SLTB004A (Thunderboard Sense 2) support The EFR32™ Mighty Gecko Starter Kit EFR32MG-SLTB004A (a.k.a Thunderboard Sense 2) contains a MCU from the EFR32MG12P family built on ARM® Cortex®-M4F processor with low power capabilities. There is an On-Board J-Link Debugger that presents a virtual COM port for general purpose application serial data transfer with this interface and a Mass Storage for firmware flashing. Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-10-31 04:56:31 +08:00
config GPIO_GECKO_PORTF
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y
boards: Add Silabs EFR32MG-SLTB004A (Thunderboard Sense 2) support The EFR32™ Mighty Gecko Starter Kit EFR32MG-SLTB004A (a.k.a Thunderboard Sense 2) contains a MCU from the EFR32MG12P family built on ARM® Cortex®-M4F processor with low power capabilities. There is an On-Board J-Link Debugger that presents a virtual COM port for general purpose application serial data transfer with this interface and a Mass Storage for firmware flashing. Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-10-31 04:56:31 +08:00
endif # GPIO_GECKO
if UART_GECKO
config USART_GECKO_0
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y
boards: Add Silabs EFR32MG-SLTB004A (Thunderboard Sense 2) support The EFR32™ Mighty Gecko Starter Kit EFR32MG-SLTB004A (a.k.a Thunderboard Sense 2) contains a MCU from the EFR32MG12P family built on ARM® Cortex®-M4F processor with low power capabilities. There is an On-Board J-Link Debugger that presents a virtual COM port for general purpose application serial data transfer with this interface and a Mass Storage for firmware flashing. Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-10-31 04:56:31 +08:00
endif # UART_GECKO
if LEUART_GECKO
config LEUART_GECKO_0
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y
boards: Add Silabs EFR32MG-SLTB004A (Thunderboard Sense 2) support The EFR32™ Mighty Gecko Starter Kit EFR32MG-SLTB004A (a.k.a Thunderboard Sense 2) contains a MCU from the EFR32MG12P family built on ARM® Cortex®-M4F processor with low power capabilities. There is an On-Board J-Link Debugger that presents a virtual COM port for general purpose application serial data transfer with this interface and a Mass Storage for firmware flashing. Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-10-31 04:56:31 +08:00
endif # LEUART_GECKO
if I2C_GECKO
config I2C_0
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y
boards: Add Silabs EFR32MG-SLTB004A (Thunderboard Sense 2) support The EFR32™ Mighty Gecko Starter Kit EFR32MG-SLTB004A (a.k.a Thunderboard Sense 2) contains a MCU from the EFR32MG12P family built on ARM® Cortex®-M4F processor with low power capabilities. There is an On-Board J-Link Debugger that presents a virtual COM port for general purpose application serial data transfer with this interface and a Mass Storage for firmware flashing. Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-10-31 04:56:31 +08:00
config I2C_1
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y
boards: Add Silabs EFR32MG-SLTB004A (Thunderboard Sense 2) support The EFR32™ Mighty Gecko Starter Kit EFR32MG-SLTB004A (a.k.a Thunderboard Sense 2) contains a MCU from the EFR32MG12P family built on ARM® Cortex®-M4F processor with low power capabilities. There is an On-Board J-Link Debugger that presents a virtual COM port for general purpose application serial data transfer with this interface and a Mass Storage for firmware flashing. Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-10-31 04:56:31 +08:00
endif # I2C_GECKO
endif # BOARD_EFR32MG_SLTB004A