OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/drivers/ethernet/Kconfig

37 lines
1.0 KiB
Plaintext
Raw Normal View History

drivers: ethernet: Push DW specific Kconfig options to its own file Note: This driver need to be ported to new native IP stack in order to be available again. Change-Id: I7825c8679e66f8a1d44d75c9d53e9da207b743af Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2016-12-06 17:17:01 +08:00
# Kconfig - Ethernet drivers configuration options
eth: dw: Add driver for Synopsys DesignWare Ethernet MAC This patch adds a driver for a Synopsys DesignWare Ethernet MAC. The driver uses interrupts to handle received frames, but it uses a spinloop when transmitting to wait for the transmit descriptor to become available. Transmission is coordinated by a fiber, so this should not result in the system execution being blocked. Only a single descriptor is allocated for each of the transmit and receive directions to save memory and simplify the code. Another simplification is that none of the offload capabilities of the Ethernet device are used. The driver currently only supports a single instance of the Ethernet MAC, which is consistent with the limitation in the network stack that only a single network device is supported. Change-Id: I013b3d439a76e8ff91a775516f7035841b040870 Signed-off-by: Michael LeMay <michael.lemay@intel.com>
2015-10-27 07:38:13 +08:00
#
# Copyright (c) 2015 Intel Corporation
#
license: Replace Apache boilerplate with SPDX tag Replace the existing Apache 2.0 boilerplate header with an SPDX tag throughout the zephyr code tree. This patch was generated via a script run over the master branch. Also updated doc/porting/application.rst that had a dependency on line numbers in a literal include. Manually updated subsys/logging/sys_log.c that had a malformed header in the original file. Also cleanup several cases that already had a SPDX tag and we either got a duplicate or missed updating. Jira: ZEP-1457 Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c Signed-off-by: David B. Kinder <david.b.kinder@intel.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-01-19 09:01:01 +08:00
# SPDX-License-Identifier: Apache-2.0
eth: dw: Add driver for Synopsys DesignWare Ethernet MAC This patch adds a driver for a Synopsys DesignWare Ethernet MAC. The driver uses interrupts to handle received frames, but it uses a spinloop when transmitting to wait for the transmit descriptor to become available. Transmission is coordinated by a fiber, so this should not result in the system execution being blocked. Only a single descriptor is allocated for each of the transmit and receive directions to save memory and simplify the code. Another simplification is that none of the offload capabilities of the Ethernet device are used. The driver currently only supports a single instance of the Ethernet MAC, which is consistent with the limitation in the network stack that only a single network device is supported. Change-Id: I013b3d439a76e8ff91a775516f7035841b040870 Signed-off-by: Michael LeMay <michael.lemay@intel.com>
2015-10-27 07:38:13 +08:00
#
eth/config: Group ethernet driver configuration into one menu. Change-Id: Ieff568916f2c0428719e3e217ce0ca1ddf2908ff Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
2016-12-20 18:30:40 +08:00
menu "Ethernet Drivers"
kconfig: Refactor the dependency on 'NET_L2_ETHERNET' Refactor the dependency on 'NET_L2_ETHERNET'. Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
2018-12-28 02:10:14 +08:00
depends on NET_L2_ETHERNET
eth/config: Group ethernet driver configuration into one menu. Change-Id: Ieff568916f2c0428719e3e217ce0ca1ddf2908ff Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
2016-12-20 18:30:40 +08:00
net: Make Kconfig template variables prettier Adding spaces around "=" when definining Kconfig template so that is more consistent with overall style of these template variables. Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2018-10-05 20:14:58 +08:00
module = ETHERNET
module-dep = LOG
module-str = Log level for Ethernet driver
module-help = Sets log level for Ethernet Device Drivers.
drivers: eth: Convert to use new logging Convert the ethernet drivers to use the new logging system. Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2018-07-09 17:51:28 +08:00
source "subsys/net/Kconfig.template.log_config.net"
eth_dw: use sys log interface for debugging Change-Id: I40ad4d2aa0419a7439a2fc0883a83430fa755b84 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-05-08 03:50:27 +08:00
ethernet: Add driver initialization priority to Kconfig The default kernel init priority is too low. Make this configurable and set the default priority so that the ethernet driver is started just before the network stack. This commit adds generic ethernet priority and changes currently available ethernet drivers to use it. Change-Id: If695e52b6dd9ea227f10ba306bb145d72d2312b0 Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2016-11-19 06:22:05 +08:00
config ETH_INIT_PRIORITY
Kconfig: Use a short, consistent style for prompts Consistently use config FOO bool/int/hex/string "Prompt text" instead of config FOO bool/int/hex/string prompt "Prompt text" (...and a bunch of other variations that e.g. swapped the order of the type and the 'prompt', or put other properties between them). The shorthand is fully equivalent to using 'prompt'. It saves lines and avoids tricking people into thinking there is some semantic difference. Most of the grunt work was done by a modified version of https://unix.stackexchange.com/questions/26284/ how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some of the rarer variations had to be converted manually. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-08-14 22:19:20 +08:00
int "Ethernet driver init priority"
ethernet: Add driver initialization priority to Kconfig The default kernel init priority is too low. Make this configurable and set the default priority so that the ethernet driver is started just before the network stack. This commit adds generic ethernet priority and changes currently available ethernet drivers to use it. Change-Id: If695e52b6dd9ea227f10ba306bb145d72d2312b0 Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2016-11-19 06:22:05 +08:00
default 80
help
Ethernet device driver initialization priority.
Do not mess with it unless you know what you are doing.
Note that the priority needs to be lower than the net stack
so that it can start before the networking sub-system.
driver: ENC28J60 Ethernet SPI module Adds the ENC28J60 Ethernet module driver. Origin: Original JIRA: ZEP-291 Change-Id: I2b5790ecb251f9059f172bcaafadef24bd27207a Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
2016-07-09 03:52:03 +08:00
source "drivers/ethernet/Kconfig.enc28j60"
ethernet: Rename ksdk to mcux Renames the ksdk ethernet shim driver to mcux. Change-Id: Ief03eabe4ce39be0d0896543c1cb660ff380b439 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-01-03 04:03:19 +08:00
source "drivers/ethernet/Kconfig.mcux"
drivers: ethernet: Push DW specific Kconfig options to its own file Note: This driver need to be ported to new native IP stack in order to be available again. Change-Id: I7825c8679e66f8a1d44d75c9d53e9da207b743af Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2016-12-06 17:17:01 +08:00
source "drivers/ethernet/Kconfig.dw"
drivers: eth: e1000: Add driver for Intel PRO/1000 Ethernet controller This patch adds a driver for Intel PRO/1000 Gigabit Ethernet controller. The driver currently supports only a single instance of the NIC. Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
2018-07-31 17:44:34 +08:00
source "drivers/ethernet/Kconfig.e1000"
drivers: Add Atmel SAM family GMAC Ethernet driver This is a zero-copy networking implementation of Ethernet driver. Limitations: - one shot PHY setup, no support for PHY disconnect/reconnect - no support for devices with DCache enabled due to missing non-cacheable RAM regions in Zephyr. Tested on Atmel SMART SAM E70 Xplained board Origin: Original Jira: ZEP-1492 Change-Id: Ib944f91193efbd12c1142b0bcf1f635388bf1b87 Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2016-12-24 10:58:38 +08:00
source "drivers/ethernet/Kconfig.sam_gmac"
driver: eth_stm32_hal: Initial STM32 HAL based Ethernet driver Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2017-06-23 19:03:51 +08:00
source "drivers/ethernet/Kconfig.stm32_hal"
drivers: eth: Add ethernet driver for native posix arch This creates zeth network interface in your host and allows user to send and receive data sent to this network interface. Fixes #6007 Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2018-02-21 22:18:35 +08:00
source "drivers/ethernet/Kconfig.native_posix"
drivers: ethernet: Add TI Stellaris ethernet controller driver. The driver can be tested using different networking emulation approaches. This approach will work across multiple Qemu instances. There can be more than one Qemu instance, run using the following command. They would appear to be on the same Ethernet network. $ qemu-system-arm -M lm3s6965evb \ -serial stdio \ -net nic \ -net socket,mcast=230.0.0.1:1234 \ -kernel zephyr.elf This approach will work with other virtualization technologies that support connecting to a VDE switch, like VirtualBox and User Mode Linux. The switch can be started using the following command. $ vde_switch --sock /tmp/switch Qemu can be connected to the switch using the following command. $ qemu-system-arm -M lm3s6965evb \ -serial stdio \ -net nic \ -net vde,sock=/tmp/switch \ -kernel zephyr.elf Signed-off-by: Fadhel Habeeb <fadhel@zilogic.com> Signed-off-by: Nirav Parmar <niravparmar@zilogic.com> Signed-off-by: Vijay Kumar B <vijaykumar@zilogic.com>
2018-09-19 17:51:47 +08:00
source "drivers/ethernet/Kconfig.stellaris"
eth/config: Group ethernet driver configuration into one menu. Change-Id: Ieff568916f2c0428719e3e217ce0ca1ddf2908ff Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
2016-12-20 18:30:40 +08:00
kconfig: Refactor the dependency on 'NET_L2_ETHERNET' Refactor the dependency on 'NET_L2_ETHERNET'. Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
2018-12-28 02:10:14 +08:00
endmenu # "Ethernet Drivers"