zephyr/boards/adi/apard32690/apard32690_max32690_m4.yaml

identifier: apard32690/max32690/m4
name: apard32690 m4
vendor: adi
type: mcu
arch: arm
toolchain:
  - zephyr
  - gnuarmemb
  - xtools
supported:
  - arduino_serial
  - arduino_spi
  - pmod_spi
  - gpio
  - serial
  - spi
  - trng
  - counter
  - w1
ram: 1024
flash: 3072
boards: adi: Add AD-APARD32690-SL Add board support for the ADI AD-APARD32690-SL. The platform is based on a MAX32690 microcontroller, it has an Arduino-Mega compatible header and 2 PMOD connectors. Also, a 10 Mbps single-pair Ethernet link is enabled by using the ADIN1110 10BASE-T1L MAC/PHY. Signed-off-by: Ciprian Regus <ciprian.regus@analog.com> 2024-06-06 05:25:34 +08:00			`identifier: apard32690/max32690/m4`
			`name: apard32690 m4`
boards: adi: Improve twister vendor filter coverage Some of the new max32 family boards were missing the vendor name in their board yamls and not being tested by `twister --vendor adi`. Signed-off-by: Maureen Helm <maureen.helm@analog.com> 2024-06-20 21:29:58 +08:00			`vendor: adi`
boards: adi: Add AD-APARD32690-SL Add board support for the ADI AD-APARD32690-SL. The platform is based on a MAX32690 microcontroller, it has an Arduino-Mega compatible header and 2 PMOD connectors. Also, a 10 Mbps single-pair Ethernet link is enabled by using the ADIN1110 10BASE-T1L MAC/PHY. Signed-off-by: Ciprian Regus <ciprian.regus@analog.com> 2024-06-06 05:25:34 +08:00			`type: mcu`
			`arch: arm`
			`toolchain:`
			`- zephyr`
			`- gnuarmemb`
			`- xtools`
			`supported:`
			`- arduino_serial`
			`- arduino_spi`
boards: adi: apard32690: Configure pmod spi pins Configures pins for the SPI instance attached to the Pmod connector to enable using this board with the pmod_acl shield. Signed-off-by: Maureen Helm <maureen.helm@analog.com> 2024-08-06 07:31:53 +08:00			`- pmod_spi`
boards: adi: Add AD-APARD32690-SL Add board support for the ADI AD-APARD32690-SL. The platform is based on a MAX32690 microcontroller, it has an Arduino-Mega compatible header and 2 PMOD connectors. Also, a 10 Mbps single-pair Ethernet link is enabled by using the ADIN1110 10BASE-T1L MAC/PHY. Signed-off-by: Ciprian Regus <ciprian.regus@analog.com> 2024-06-06 05:25:34 +08:00			`- gpio`
			`- serial`
			`- spi`
boards: arm: Enable TRNG driver for APARD32690 TRNG enabled for APARD32690 board Signed-off-by: Sadik Ozer <sadik.ozer@analog.com> 2024-06-26 00:16:16 +08:00			`- trng`
boards: arm: Add counter in MAX32690 driver list Update MAX32690 board documents to include counter driver too. Signed-off-by: Sadik Ozer <sadik.ozer@analog.com> 2024-05-14 16:03:38 +08:00			`- counter`
boards: adi: Add 1-Wire driver in APARD32690 driver list Add 1W driver in APARD32690 driver list Signed-off-by: Sadik Ozer <sadik.ozer@analog.com> 2024-06-26 12:34:29 +08:00			`- w1`
boards: adi: Add AD-APARD32690-SL Add board support for the ADI AD-APARD32690-SL. The platform is based on a MAX32690 microcontroller, it has an Arduino-Mega compatible header and 2 PMOD connectors. Also, a 10 Mbps single-pair Ethernet link is enabled by using the ADIN1110 10BASE-T1L MAC/PHY. Signed-off-by: Ciprian Regus <ciprian.regus@analog.com> 2024-06-06 05:25:34 +08:00			`ram: 1024`
			`flash: 3072`