OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/arch/arm/soc/nxp_kinetis/kwx/Kconfig.soc

57 lines
1.1 KiB
Plaintext
Raw Normal View History

kw41z: Add kw41z SoC Adds initial support for the kw41z SoC. This is the first SoC in the Kinetis W (wireless connectivity) series added to Zephyr. The kw41z integrates a 2.4 GHz radio transceiver, BLE link layer hardware, and an 802.15.4 packet processor with an ARM Cortex M0+. It has 512 KB flash, 128 KB SRAM, and can run the system clock at up to 48 MHz. This SoC currently has mcux shim drivers for lpuart (serial), gpio, pinmux, i2c, and flash. Jira: ZEP-1389 Change-Id: I8cff6d203867ba3ace7e05c36441dc8f3cbca8d8 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-01-18 06:49:16 +08:00
# Kconfig - Kinetis KWx MCU series
#
# Copyright (c) 2017, NXP
#
# SPDX-License-Identifier: Apache-2.0
#
choice
prompt "Kinetis KWx MCU Selection"
depends on SOC_SERIES_KINETIS_KWX
kw40z: Add kw40z SoC Adds initial support for the kw40z SoC. This SoC has all the same peripherals as the kw41z but with less flash and ram, so the defconfig and dts are nearly the same. Jira: ZEP-1388 Change-Id: Ib804451e8c2c71c4ff7d342bf23f6567d1542a2d Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-04-06 04:19:24 +08:00
config SOC_MKW40Z4
bool "SOC_MKW40Z4"
select CPU_CORTEX_M0PLUS
select HAS_MCUX
select HAS_OSC
select HAS_MCG
select HAS_LPUART
arm: nxp_kinetis: Enable the mcux adc16 driver for all Kinetis SoCs If the adc driver configuration is enabled (CONFIG_ADC=y), then enable the mcux shim driver by default for all Kinetis SoCs. Jira: ZEP-1396 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-06-06 04:37:22 +08:00
select HAS_ADC16
kw40z: Add kw40z SoC Adds initial support for the kw40z SoC. This SoC has all the same peripherals as the kw41z but with less flash and ram, so the defconfig and dts are nearly the same. Jira: ZEP-1388 Change-Id: Ib804451e8c2c71c4ff7d342bf23f6567d1542a2d Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-04-06 04:19:24 +08:00
select HAS_TRNG
select HAS_SEGGER_RTT
kw41z: Add kw41z SoC Adds initial support for the kw41z SoC. This is the first SoC in the Kinetis W (wireless connectivity) series added to Zephyr. The kw41z integrates a 2.4 GHz radio transceiver, BLE link layer hardware, and an 802.15.4 packet processor with an ARM Cortex M0+. It has 512 KB flash, 128 KB SRAM, and can run the system clock at up to 48 MHz. This SoC currently has mcux shim drivers for lpuart (serial), gpio, pinmux, i2c, and flash. Jira: ZEP-1389 Change-Id: I8cff6d203867ba3ace7e05c36441dc8f3cbca8d8 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-01-18 06:49:16 +08:00
config SOC_MKW41Z4
bool "SOC_MKW41Z4"
select CPU_CORTEX_M0PLUS
select HAS_MCUX
select HAS_OSC
select HAS_MCG
select HAS_LPUART
arm: nxp_kinetis: Enable the mcux adc16 driver for all Kinetis SoCs If the adc driver configuration is enabled (CONFIG_ADC=y), then enable the mcux shim driver by default for all Kinetis SoCs. Jira: ZEP-1396 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-06-06 04:37:22 +08:00
select HAS_ADC16
kw41z: enable TRNG driver Change-Id: Iae4ad82d359a2195ea4ab9a7a6e329c38276cdfa Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
2017-02-28 19:27:46 +08:00
select HAS_TRNG
kw41z: Add kw41z SoC Adds initial support for the kw41z SoC. This is the first SoC in the Kinetis W (wireless connectivity) series added to Zephyr. The kw41z integrates a 2.4 GHz radio transceiver, BLE link layer hardware, and an 802.15.4 packet processor with an ARM Cortex M0+. It has 512 KB flash, 128 KB SRAM, and can run the system clock at up to 48 MHz. This SoC currently has mcux shim drivers for lpuart (serial), gpio, pinmux, i2c, and flash. Jira: ZEP-1389 Change-Id: I8cff6d203867ba3ace7e05c36441dc8f3cbca8d8 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-01-18 06:49:16 +08:00
endchoice
if SOC_SERIES_KINETIS_KWX
kw40z: Add kw40z SoC Adds initial support for the kw40z SoC. This SoC has all the same peripherals as the kw41z but with less flash and ram, so the defconfig and dts are nearly the same. Jira: ZEP-1388 Change-Id: Ib804451e8c2c71c4ff7d342bf23f6567d1542a2d Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-04-06 04:19:24 +08:00
config SOC_PART_NUMBER_MKW40Z160VHT4
bool
kw41z: Add kw41z SoC Adds initial support for the kw41z SoC. This is the first SoC in the Kinetis W (wireless connectivity) series added to Zephyr. The kw41z integrates a 2.4 GHz radio transceiver, BLE link layer hardware, and an 802.15.4 packet processor with an ARM Cortex M0+. It has 512 KB flash, 128 KB SRAM, and can run the system clock at up to 48 MHz. This SoC currently has mcux shim drivers for lpuart (serial), gpio, pinmux, i2c, and flash. Jira: ZEP-1389 Change-Id: I8cff6d203867ba3ace7e05c36441dc8f3cbca8d8 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-01-18 06:49:16 +08:00
config SOC_PART_NUMBER_MKW41Z256VHT4
bool
config SOC_PART_NUMBER_MKW41Z512VHT4
bool
config SOC_PART_NUMBER_KINETIS_KWX
string
kw40z: Add kw40z SoC Adds initial support for the kw40z SoC. This SoC has all the same peripherals as the kw41z but with less flash and ram, so the defconfig and dts are nearly the same. Jira: ZEP-1388 Change-Id: Ib804451e8c2c71c4ff7d342bf23f6567d1542a2d Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-04-06 04:19:24 +08:00
default "MKW40Z160VHT4" if SOC_PART_NUMBER_MKW40Z160VHT4
kw41z: Add kw41z SoC Adds initial support for the kw41z SoC. This is the first SoC in the Kinetis W (wireless connectivity) series added to Zephyr. The kw41z integrates a 2.4 GHz radio transceiver, BLE link layer hardware, and an 802.15.4 packet processor with an ARM Cortex M0+. It has 512 KB flash, 128 KB SRAM, and can run the system clock at up to 48 MHz. This SoC currently has mcux shim drivers for lpuart (serial), gpio, pinmux, i2c, and flash. Jira: ZEP-1389 Change-Id: I8cff6d203867ba3ace7e05c36441dc8f3cbca8d8 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-01-18 06:49:16 +08:00
default "MKW41Z256VHT4" if SOC_PART_NUMBER_MKW41Z256VHT4
default "MKW41Z512VHT4" if SOC_PART_NUMBER_MKW41Z512VHT4
help
kinetis: fix Kconfig indentation Help text in Kconfig files should be indented with <tab><space><space>. Change-Id: Iefa5c8f4bfe329b4ee754ebfe43766f445432184 Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
2017-03-01 16:58:34 +08:00
This string holds the full part number of the SoC. It is a hidden option
that you should not set directly. The part number selection choice defines
the default value for this string.
kw41z: Add kw41z SoC Adds initial support for the kw41z SoC. This is the first SoC in the Kinetis W (wireless connectivity) series added to Zephyr. The kw41z integrates a 2.4 GHz radio transceiver, BLE link layer hardware, and an 802.15.4 packet processor with an ARM Cortex M0+. It has 512 KB flash, 128 KB SRAM, and can run the system clock at up to 48 MHz. This SoC currently has mcux shim drivers for lpuart (serial), gpio, pinmux, i2c, and flash. Jira: ZEP-1389 Change-Id: I8cff6d203867ba3ace7e05c36441dc8f3cbca8d8 Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-01-18 06:49:16 +08:00
endif # SOC_SERIES_KINETIS_KWX