zephyr/boards/sparkfun/sparkfun_pro_micro_rp2040/Kconfig.defconfig

# Copyright (c) 2021 Pete Johanson
# SPDX-License-Identifier: Apache-2.0

if BOARD_SPARKFUN_PRO_MICRO_RP2040

config RP2_FLASH_W25Q080
	default y

if I2C_DW

config I2C_DW_CLOCK_SPEED
	default 125

endif # I2C_DW

config USB_SELF_POWERED
	default n

endif # BOARD_SPARKFUN_PRO_MICRO_RP2040
boards: arm: Add sparkfun_pro_micro_rp2040 board Add `sparkfun_pro_micro_rp2040` board with `sparkfun,pro-micro` header. Signed-off-by: Peter Johanson <peter@peterjohanson.com> 2022-04-19 14:36:06 +08:00			`# Copyright (c) 2021 Pete Johanson`
			`# SPDX-License-Identifier: Apache-2.0`

			`if BOARD_SPARKFUN_PRO_MICRO_RP2040`

			`config RP2_FLASH_W25Q080`
			`default y`

rp2040: Fix I2C frequency for all boards The DW driver used by the RP2040 boards uses a Kconfig symbol to determine the clock speed of the board. This value was set incorrectly by the pico board to 100MHz (instead of 125). For the other boards, it wasn't set at all. This commit fixes the kconfig defaults. In the future, this value should be taken directly from the devicetree. This is not currently possible as there is no clock control driver for the RP2040 (see #52901). Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com> 2023-06-04 05:12:49 +08:00			`if I2C_DW`

			`config I2C_DW_CLOCK_SPEED`
			`default 125`

boards: arm: sparkfun_pro_micro_rp2040: Convert to v2 Converts the board to hwmv2 Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no> 2024-01-11 18:19:17 +08:00			`endif # I2C_DW`
rp2040: Fix I2C frequency for all boards The DW driver used by the RP2040 boards uses a Kconfig symbol to determine the clock speed of the board. This value was set incorrectly by the pico board to 100MHz (instead of 125). For the other boards, it wasn't set at all. This commit fixes the kconfig defaults. In the future, this value should be taken directly from the devicetree. This is not currently possible as there is no clock control driver for the RP2040 (see #52901). Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com> 2023-06-04 05:12:49 +08:00
rp2040: Fix USB self powered for all boards The USB configuration for all rp2040 boards wrongfully left USB_SELF_POWERED as true by default. This commit fixes it for all rp2040 boards. Fixes #53993 Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com> 2023-06-04 05:28:15 +08:00			`config USB_SELF_POWERED`
			`default n`

boards: arm: Add sparkfun_pro_micro_rp2040 board Add `sparkfun_pro_micro_rp2040` board with `sparkfun,pro-micro` header. Signed-off-by: Peter Johanson <peter@peterjohanson.com> 2022-04-19 14:36:06 +08:00			`endif # BOARD_SPARKFUN_PRO_MICRO_RP2040`