OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/tests/drivers/build_all/sensors_a_h.conf

35 lines
570 B
Plaintext
Raw Normal View History

tests: add CONFIG_TEST for marking tests Mark tests with CONFIG_TEST to allow for test specific setup and configuration. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-01-07 05:15:53 +08:00
CONFIG_TEST=y
tests: Adjust drivers/build_all to build for more boards. The build_all tests contain an ever growing list of device drivers to build. Ideally we minimize the number of images we build, but we already observe that some of the tests, notably sensors, is too big for some of our supported boards. Rather disable an ever growing list of boards as the build_all tests get bigger it would be better to split the tests into smaller chunks that can reasonably be expected to run on any supported board. We split the sensor test set into two, the division is arbitrary, based on the name of the driver. This allows us to remove the filter on the quark_d2000. The current split into two groups is arbirary, in the future it is inevitable that as the list of supported drivers grows, we will need to further subdivied the larger tests. Change-Id: If7ee00b3c8e1749c4c827f83d7cbc2feb70e56ad Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
2016-10-24 20:36:29 +08:00
CONFIG_GPIO=y
CONFIG_I2C=y
CONFIG_SENSOR=y
CONFIG_SPI=y
drivers: sensor: Migrate to new logger Move all sensor drivers and samples to new logging system. Signed-off-by: Punit Vara <punit.vara@intel.com>
2018-10-10 14:38:54 +08:00
CONFIG_LOG=y
CONFIG_SENSOR_LOG_LEVEL_DBG=y
tests: CONFIG_TEST_USERSPACE now off by default Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps expose stack overflows in test code, activating userspace without putting threads in user mode is of very limited value. Now CONFIG_TEST_USERSPACE is off by default. Any test which puts threads in user mode will need to set CONFIG_TEST_USERSPACE. This should greatly increase sanitycheck build times as there is non-trivial build time overhead to enabling this feature. This also allows some tests which failed the build on RAM-constrained platforms to compile properly. tests/drivers/build_all is a special case; it doesn't put threads in user mode, but we want to ensure all the syscall handlers compile properly. Fixes: #15103 (and probably others) Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
2019-04-06 06:39:50 +08:00
CONFIG_TEST_USERSPACE=y
tests: expand sensor build testing by enabling more sensors This will help catch build issues with sensors by enabling all sensors we have into one single application using all supported IOs. Change-Id: Id8c201b8ae9b74dccc62d6440899ff487ea09d43 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-07 19:44:09 +08:00
CONFIG_ADC=y
tests: build_all: Add missing sensor drivers and rebalance testcases Adds many missing sensor drivers and rebalances the testcases to instantiate similar numbers of sensor drivers. Splits the sensor trigger testcase into two due to having too many thread objects. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-18 21:43:44 +08:00
CONFIG_ADT7420=y
CONFIG_ADXL362=y
CONFIG_ADXL372=y
tests: expand sensor build testing by enabling more sensors This will help catch build issues with sensors by enabling all sensors we have into one single application using all supported IOs. Change-Id: Id8c201b8ae9b74dccc62d6440899ff487ea09d43 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-07 19:44:09 +08:00
CONFIG_AK8975=y
tests: build_all: Add missing sensor drivers and rebalance testcases Adds many missing sensor drivers and rebalances the testcases to instantiate similar numbers of sensor drivers. Splits the sensor trigger testcase into two due to having too many thread objects. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-18 21:43:44 +08:00
CONFIG_AMG88XX=y
tests: drivers: build_all: Add AMS IAQcore and ENS210 to build all This commit adds IAQcore and ENS210 from AMS to the build tests. Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
2019-03-02 18:52:53 +08:00
CONFIG_AMS_IAQ_CORE=y
tests: build_all: Add missing sensor drivers and rebalance testcases Adds many missing sensor drivers and rebalances the testcases to instantiate similar numbers of sensor drivers. Splits the sensor trigger testcase into two due to having too many thread objects. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-18 21:43:44 +08:00
CONFIG_APDS9960=y
tests: expand sensor build testing by enabling more sensors This will help catch build issues with sensors by enabling all sensors we have into one single application using all supported IOs. Change-Id: Id8c201b8ae9b74dccc62d6440899ff487ea09d43 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-07 19:44:09 +08:00
CONFIG_BMA280=y
tests: build_all: Add missing sensor drivers and rebalance testcases Adds many missing sensor drivers and rebalances the testcases to instantiate similar numbers of sensor drivers. Splits the sensor trigger testcase into two due to having too many thread objects. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-18 21:43:44 +08:00
CONFIG_BMC150_MAGN=y
tests: expand sensor build testing by enabling more sensors This will help catch build issues with sensors by enabling all sensors we have into one single application using all supported IOs. Change-Id: Id8c201b8ae9b74dccc62d6440899ff487ea09d43 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-07 19:44:09 +08:00
CONFIG_BME280=y
tests: build_all: Add missing sensor drivers and rebalance testcases Adds many missing sensor drivers and rebalances the testcases to instantiate similar numbers of sensor drivers. Splits the sensor trigger testcase into two due to having too many thread objects. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-18 21:43:44 +08:00
CONFIG_BMG160=y
CONFIG_BMI160=y
CONFIG_BMM150=y
sensor: bq274xx: Add BQ27421 driver Add support for TI BQ27421 fuel gauge sensor Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> Signed-off-by: NavinSankar Velliangiri <navin@linumiz.com>
2020-03-20 02:27:43 +08:00
CONFIG_BQ274XX=y
tests: build_all: Add missing sensor drivers and rebalance testcases Adds many missing sensor drivers and rebalances the testcases to instantiate similar numbers of sensor drivers. Splits the sensor trigger testcase into two due to having too many thread objects. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-18 21:43:44 +08:00
CONFIG_CCS811=y
tests: expand sensor build testing by enabling more sensors This will help catch build issues with sensors by enabling all sensors we have into one single application using all supported IOs. Change-Id: Id8c201b8ae9b74dccc62d6440899ff487ea09d43 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-07 19:44:09 +08:00
CONFIG_DHT=y
sensor: add sensor driver for Infineon DPS310 Add driver for Infineon DPS310 temperature and pressure sensor. Signed-off-by: Christoph Reiter <christoph.reiter@infineon.com>
2019-11-05 20:17:39 +08:00
CONFIG_DPS310=y
tests: drivers: build_all: Add AMS IAQcore and ENS210 to build all This commit adds IAQcore and ENS210 from AMS to the build tests. Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
2019-03-02 18:52:53 +08:00
CONFIG_ENS210=y
tests: build_all: Add missing sensors Now that we have an application level dts fixup, we can re-enable the fxos8700 sensor in the build_all test. Also added fxas21002 and max30101 sensors which were missing. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-01-31 03:56:49 +08:00
CONFIG_FXAS21002=y
CONFIG_FXOS8700=y
tests: expand sensor build testing by enabling more sensors This will help catch build issues with sensors by enabling all sensors we have into one single application using all supported IOs. Change-Id: Id8c201b8ae9b74dccc62d6440899ff487ea09d43 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-07 19:44:09 +08:00
CONFIG_HMC5883L=y
test: drivers/build_all support HP206C Change-Id: Ifad32d59a9786e5b1334532c5c6e7f29657c2a77 Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
2016-10-26 20:10:04 +08:00
CONFIG_HP206C=y
tests: build_all: Add missing sensor drivers and rebalance testcases Adds many missing sensor drivers and rebalances the testcases to instantiate similar numbers of sensor drivers. Splits the sensor trigger testcase into two due to having too many thread objects. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-18 21:43:44 +08:00
CONFIG_HTS221=y
Sensor: ADXL345: Add ADXL345 driver Add support for Analog Devices ADXL345 3-axis I2C accelerometer. Signed-off-by: Kamil Rakoczy <krakoczy@antmicro.com>
2020-03-13 18:32:14 +08:00
CONFIG_ADXL345=y
Sensor: mpr: Add Honeywell MPR driver The Honeywell MPR sensor is a piezoresistive silicon pressure sensor, which can be accessed via i2c. https://sensing.honeywell.com/micropressure-mpr-series Signed-off-by: Sven Herrmann <sven.herrmann@posteo.de>
2020-04-14 03:47:36 +08:00
CONFIG_MPR=y