OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/samples/bluetooth/mesh/prj_bbc_microbit.conf

64 lines
1.4 KiB
Plaintext
Raw Normal View History

Bluetooth: Mesh: Add initial implementation Add an initial implementation for the Bluetooth Mesh Profile Specification. The main code resides in subsys/bluetooth/host/mesh and the public API can be found in include/bluetooth/mesh.h. There are a couple of samples provided as well under samples/bluetooth and tests/bluetooth. The implementation covers all layers of the Bluetooth Mesh stack and most optional features as well. The following is a list of some of these features and the c-files where the implementation can be found: - GATT & Advertising bearers (proxy.c & adv.c) - Network Layer (net.c) - Lower and Upper Transport Layers (transport.c) - Access Layer (access.c) - Foundation Models, Server role (health.c & cfg.c) - Both PB-ADV and PB-GATT based provisioning (prov.c) - Low Power Node support (lpn.c) - Relay support (net.c) - GATT Proxy (proxy.c) Notable features that are *not* part of the implementation: - Friend support (initial bits are in place in friend.c) - Provisioner support (low-value for typical Zephyr devices) - GATT Client (low-value for typical Zephyr devices) Jira: ZEP-2360 Change-Id: Ic773113dbfd84878ff8cee7fe2bb948f0ace19ed Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-06-16 17:30:54 +08:00
CONFIG_INIT_STACKS=y
samples: Bluetooth: Increase ISR_STACK_SIZE value Split Link Layer implementation uses 80 bytes more ISR stack in comparison to Legacy Link Layer, hence increase the required ISR_STACK_SIZE for the BBC micro:bit and other nRF51 QFAA SoC based mesh and mesh_demo samples. Fixes #20414. Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
2019-12-10 15:21:21 +08:00
CONFIG_ISR_STACK_SIZE=768
Bluetooth: Mesh: Add initial implementation Add an initial implementation for the Bluetooth Mesh Profile Specification. The main code resides in subsys/bluetooth/host/mesh and the public API can be found in include/bluetooth/mesh.h. There are a couple of samples provided as well under samples/bluetooth and tests/bluetooth. The implementation covers all layers of the Bluetooth Mesh stack and most optional features as well. The following is a list of some of these features and the c-files where the implementation can be found: - GATT & Advertising bearers (proxy.c & adv.c) - Network Layer (net.c) - Lower and Upper Transport Layers (transport.c) - Access Layer (access.c) - Foundation Models, Server role (health.c & cfg.c) - Both PB-ADV and PB-GATT based provisioning (prov.c) - Low Power Node support (lpn.c) - Relay support (net.c) - GATT Proxy (proxy.c) Notable features that are *not* part of the implementation: - Friend support (initial bits are in place in friend.c) - Provisioner support (low-value for typical Zephyr devices) - GATT Client (low-value for typical Zephyr devices) Jira: ZEP-2360 Change-Id: Ic773113dbfd84878ff8cee7fe2bb948f0ace19ed Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-06-16 17:30:54 +08:00
CONFIG_MAIN_STACK_SIZE=512
driver: ILI9340 LCD display driver Minimal driver for ILI9340 LCD display driver including support for adafruit 2.2" LCD display (1480) Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
2017-10-06 14:34:43 +08:00
CONFIG_DISPLAY=y
Bluetooth: Mesh: Add initial implementation Add an initial implementation for the Bluetooth Mesh Profile Specification. The main code resides in subsys/bluetooth/host/mesh and the public API can be found in include/bluetooth/mesh.h. There are a couple of samples provided as well under samples/bluetooth and tests/bluetooth. The implementation covers all layers of the Bluetooth Mesh stack and most optional features as well. The following is a list of some of these features and the c-files where the implementation can be found: - GATT & Advertising bearers (proxy.c & adv.c) - Network Layer (net.c) - Lower and Upper Transport Layers (transport.c) - Access Layer (access.c) - Foundation Models, Server role (health.c & cfg.c) - Both PB-ADV and PB-GATT based provisioning (prov.c) - Low Power Node support (lpn.c) - Relay support (net.c) - GATT Proxy (proxy.c) Notable features that are *not* part of the implementation: - Friend support (initial bits are in place in friend.c) - Provisioner support (low-value for typical Zephyr devices) - GATT Client (low-value for typical Zephyr devices) Jira: ZEP-2360 Change-Id: Ic773113dbfd84878ff8cee7fe2bb948f0ace19ed Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-06-16 17:30:54 +08:00
CONFIG_MICROBIT_DISPLAY=y
Bluetooth: Mesh: Add some actual behavior in sample Populates the onoff server stubs in the Bluetooth Mesh sample, and implements generic LED based hardware support to include more boards. Fixes #31031. Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
2021-03-11 22:10:42 +08:00
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=1024
samples: mesh: bbc_microbit SRAM improvements Save a bit more SRAM on bbc_microbit by tuning some Kconfigs. Mark some arrays const to try to avoid stack allocating them while we're here. Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
2021-03-18 06:55:09 +08:00
CONFIG_MICROBIT_DISPLAY_STR_MAX=5
Bluetooth: Mesh: Add initial implementation Add an initial implementation for the Bluetooth Mesh Profile Specification. The main code resides in subsys/bluetooth/host/mesh and the public API can be found in include/bluetooth/mesh.h. There are a couple of samples provided as well under samples/bluetooth and tests/bluetooth. The implementation covers all layers of the Bluetooth Mesh stack and most optional features as well. The following is a list of some of these features and the c-files where the implementation can be found: - GATT & Advertising bearers (proxy.c & adv.c) - Network Layer (net.c) - Lower and Upper Transport Layers (transport.c) - Access Layer (access.c) - Foundation Models, Server role (health.c & cfg.c) - Both PB-ADV and PB-GATT based provisioning (prov.c) - Low Power Node support (lpn.c) - Relay support (net.c) - GATT Proxy (proxy.c) Notable features that are *not* part of the implementation: - Friend support (initial bits are in place in friend.c) - Provisioner support (low-value for typical Zephyr devices) - GATT Client (low-value for typical Zephyr devices) Jira: ZEP-2360 Change-Id: Ic773113dbfd84878ff8cee7fe2bb948f0ace19ed Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-06-16 17:30:54 +08:00
CONFIG_GPIO=y
samples: mesh: bbc_microbit SRAM improvements Save a bit more SRAM on bbc_microbit by tuning some Kconfigs. Mark some arrays const to try to avoid stack allocating them while we're here. Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
2021-03-18 06:55:09 +08:00
CONFIG_PM=n
Bluetooth: Mesh: Introduce generic storage timer Instead of having an RPL-specific storage timer, introduce a generic one that'll eventually be used for all persistent storage. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2018-05-09 04:34:56 +08:00
CONFIG_BT_SETTINGS=y
CONFIG_FLASH=y
CONFIG_FLASH_PAGE_LAYOUT=y
CONFIG_FLASH_MAP=y
samples: migrating to NVS backend with settings Bluetooth samples now use the NVS backend for Settings. Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
2019-10-08 17:44:18 +08:00
CONFIG_NVS=y
Bluetooth: Mesh: Introduce generic storage timer Instead of having an RPL-specific storage timer, introduce a generic one that'll eventually be used for all persistent storage. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2018-05-09 04:34:56 +08:00
CONFIG_SETTINGS=y
Bluetooth: Kconfig: Rename CONFIG_BLUETOOTH_* to CONFIG_BT_* The API name space for Bluetooth is bt_* and BT_* so it makes sense to align the Kconfig name space with this. The additional benefit is that this also makes the names shorter. It is also in line with what Linux uses for Bluetooth Kconfig entries. Some Bluetooth-related Networking Kconfig defines are renamed as well in order to be consistent, such as NET_L2_BLUETOOTH. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-08-09 14:21:11 +08:00
CONFIG_BT=y
CONFIG_BT_TINYCRYPT_ECC=y
CONFIG_BT_RX_STACK_SIZE=1100
Bluetooth: Refactor bluetooth buffer configuration for simplification Refactor and simplify the bluetooth buffer configurations to improve the easy of configurations and eliminate invalid ones. By moving configurations out of host and controller specific configurations and into a common one it becomes easier to configure the host and controller separately as the same configurations can be used as would be for a combined build. All HCI configurations are now given exluding the matching HCI header, which eases the configuration as the application don't have to know the different header sizes. The BT_RX_BUF_LEN is split into ACL and Event, as well as the suprising use of Command size. BT_L2CAP_RX_MTU is removed as the stack does not support reassembling of HCI ACL data to larger L2CAP PDUs. The application will have to set ACL RX size and account for the L2CAP PDU header itself. BT_EATT_RX_MTU was removed as it is only used for setting a different default value for another option which leads to the stuck kconfig symbol problem. The configurations can be updated according to the table below: ** New configuration | ** Old configuration All configurations BT_BUF_ACL_RX_SIZE | BT_L2CAP_RX_MTU + 4 BT_BUF_ACL_RX_SIZE | BT_RX_BUF_LEN - 4 BT_BUF_EVT_RX_SIZE | BT_RX_BUF_LEN - 2 BT_BUF_CMD_TX_SIZE | BT_RX_BUF_LEN - 3 BT_BUF_CMD_TX_COUNT | BT_HCI_CMD_COUNT BT_BUF_EVT_RX_COUNT | BT_RX_BUF_COUNT BT_BUF_ACL_RX_COUNT | BT_RX_BUF_COUNT BT_BUF_ACL_RX_COUNT | BT_ACL_RX_COUNT BT_BUF_EVT_DISCARDABLE_SIZE | BT_DISCARDABLE_BUF_SIZE - 2 BT_BUF_EVT_DISCARDABLE_COUNT | BT_DISCARDABLE_BUF_COUNT Controller-build BT_BUF_ACL_TX_SIZE | BT_CTLR_TX_BUFFERS_SIZE BT_BUF_ACL_TX_COUNT | BT_CTLR_TX_BUFFER HCI-bridge BT_BUF_ACL_TX_SIZE | BT_HCI_ACL_DATA_SIZE BT_BUF_ACL_TX_COUNT | 6 Fixed invalid configurations setting either BT_L2CAP_RX_MTU or BT_CTLR_DATA_LENGTH_MAX larger than BT_RX_BUF_LEN could lead to buffer overruns. Fix advertising report max data length calculation. This always used the BT_DISCARDABLE_BUF_SIZE macro but this feature can be turned off and advertising reports will be allocated from the RX buffer in that case. Also controller-build does not have this buffer (in hci_raw.c). Also the wrong HCI header was used in the calculation, HCI event header should have been used instead of HCI ACL header. Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
2021-04-27 16:38:23 +08:00
CONFIG_BT_BUF_EVT_RX_COUNT=3
CONFIG_BT_BUF_ACL_RX_COUNT=3
CONFIG_BT_BUF_EVT_DISCARDABLE_COUNT=3
Bluetooth: Kconfig: Rename CONFIG_BLUETOOTH_* to CONFIG_BT_* The API name space for Bluetooth is bt_* and BT_* so it makes sense to align the Kconfig name space with this. The additional benefit is that this also makes the names shorter. It is also in line with what Linux uses for Bluetooth Kconfig entries. Some Bluetooth-related Networking Kconfig defines are renamed as well in order to be consistent, such as NET_L2_BLUETOOTH. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-08-09 14:21:11 +08:00
Bluetooth: controller: Rename Kconfig prefix Rename the BT_CONTROLLER prefix used in all of the Kconfig variables related to the Bluetooth controller to BT_CTLR. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2017-08-14 19:45:13 +08:00
CONFIG_BT_CTLR_DUP_FILTER_LEN=0
Bluetooth: Kconfig: Rename CONFIG_BLUETOOTH_* to CONFIG_BT_* The API name space for Bluetooth is bt_* and BT_* so it makes sense to align the Kconfig name space with this. The additional benefit is that this also makes the names shorter. It is also in line with what Linux uses for Bluetooth Kconfig entries. Some Bluetooth-related Networking Kconfig defines are renamed as well in order to be consistent, such as NET_L2_BLUETOOTH. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-08-09 14:21:11 +08:00
CONFIG_BT_OBSERVER=y
CONFIG_BT_BROADCASTER=y
Bluetooth: controller: Rename Kconfig prefix Rename the BT_CONTROLLER prefix used in all of the Kconfig variables related to the Bluetooth controller to BT_CTLR. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2017-08-14 19:45:13 +08:00
CONFIG_BT_CTLR_LE_ENC=n
CONFIG_BT_CTLR_LE_PING=n
Bluetooth: Add common Kconfig option to disable LE Data Length Update This adds common option to disable support for LE Data Length Update procedure in controller and host. This will reduce flash usage by compiling out le_data_len_change event handler that will never be called if controller has been compiled with BT_CTLR_DATA_LENGTH option disabled. Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
2018-11-21 18:14:19 +08:00
CONFIG_BT_DATA_LEN_UPDATE=n
Bluetooth: Add common Kconfig option to disable PHY Update This adds common option to disable support for PHY Update procedure in controller and host. This will reduce flash usage by compiling out le_phy_update_complete event handler that will never be called if controller has been compiled with BT_CTLR_PHY option disabled. Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
2018-11-21 17:52:18 +08:00
CONFIG_BT_PHY_UPDATE=n
Bluetooth: controller: Rename Kconfig prefix Rename the BT_CONTROLLER prefix used in all of the Kconfig variables related to the Bluetooth controller to BT_CTLR. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2017-08-14 19:45:13 +08:00
CONFIG_BT_CTLR_CHAN_SEL_2=n
Bluetooth: controller: Add Minimum Number of Used Channels Proc Add implementation to support Bluetooth 5.0 Minimum Number of Used Channels Procedure. Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
2017-08-18 19:46:49 +08:00
CONFIG_BT_CTLR_MIN_USED_CHAN=n
Bluetooth: controller: Rename Kconfig prefix Rename the BT_CONTROLLER prefix used in all of the Kconfig variables related to the Bluetooth controller to BT_CTLR. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2017-08-14 19:45:13 +08:00
CONFIG_BT_CTLR_ADV_EXT=n
CONFIG_BT_CTLR_PRIVACY=n
Bluetooth: Kconfig: Rename CONFIG_BLUETOOTH_* to CONFIG_BT_* The API name space for Bluetooth is bt_* and BT_* so it makes sense to align the Kconfig name space with this. The additional benefit is that this also makes the names shorter. It is also in line with what Linux uses for Bluetooth Kconfig entries. Some Bluetooth-related Networking Kconfig defines are renamed as well in order to be consistent, such as NET_L2_BLUETOOTH. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-08-09 14:21:11 +08:00
CONFIG_BT_MESH=y
Bluetooth: Mesh: Slab based segmentation handling Allocates segmented message buffers as slabs in a common pool for RX and TX. This reduces memory requirements for both TX and RX, as TX messages can be stored without the network and advertising buffer overhead, and RX can use only the slabs it needs, instead of allocating a full size segmented message. This approach also removes the need for decrypting the segments for each retransmission, reducing overall processing load. Slab based segmentation for tx also introduces queuing of segmented messages, which allows the application layer to send multiple messages to the same destination without violating Bluetooth Mesh specification v1.0.1, section 3.6.4.1. This mechanism is provided through a flag that blocks segmented messages to a destination which a message is already being sent to until the previous message finishes. This changes the SDU size configuration to a symmetrical RX_SEG_MAX/TX_SEG_MAX pair of configurations, plus a new segment pool side configuration. It also removes the binding between the TX_SEG_MAX config and the advertising buffers, reducing the minimum advertising buffer count from 6 to 3. Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
2020-03-05 23:10:15 +08:00
CONFIG_BT_MESH_ADV_BUF_COUNT=3
Bluetooth: Mesh: Reduce microbit memory consumption Trims the default memory configuration for the BBC Microbit in mesh samples to ensure that it fits. Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
2020-08-26 17:55:34 +08:00
CONFIG_BT_MESH_SEG_BUFS=3
Bluetooth: Kconfig: Rename CONFIG_BLUETOOTH_* to CONFIG_BT_* The API name space for Bluetooth is bt_* and BT_* so it makes sense to align the Kconfig name space with this. The additional benefit is that this also makes the names shorter. It is also in line with what Linux uses for Bluetooth Kconfig entries. Some Bluetooth-related Networking Kconfig defines are renamed as well in order to be consistent, such as NET_L2_BLUETOOTH. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-08-09 14:21:11 +08:00
CONFIG_BT_MESH_RELAY=y
Bluetooth: Mesh: Reduce microbit memory consumption Trims the default memory configuration for the BBC Microbit in mesh samples to ensure that it fits. Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
2020-08-26 17:55:34 +08:00
CONFIG_BT_MESH_LOOPBACK_BUFS=1
Bluetooth: Kconfig: Rename CONFIG_BLUETOOTH_* to CONFIG_BT_* The API name space for Bluetooth is bt_* and BT_* so it makes sense to align the Kconfig name space with this. The additional benefit is that this also makes the names shorter. It is also in line with what Linux uses for Bluetooth Kconfig entries. Some Bluetooth-related Networking Kconfig defines are renamed as well in order to be consistent, such as NET_L2_BLUETOOTH. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-08-09 14:21:11 +08:00
#CONFIG_BT_MESH_LOW_POWER=y
#CONFIG_BT_MESH_SELF_TEST=y
#CONFIG_BT_MESH_IV_UPDATE_TEST=y
CONFIG_BT_MESH_SUBNET_COUNT=1
CONFIG_BT_MESH_APP_KEY_COUNT=1
CONFIG_BT_MESH_MODEL_GROUP_COUNT=1
CONFIG_BT_MESH_LABEL_COUNT=0
#CONFIG_BT_DEBUG_LOG=y
#CONFIG_BT_MESH_DEBUG=y
#CONFIG_BT_MESH_DEBUG_NET=y
#CONFIG_BT_MESH_DEBUG_TRANS=y
#CONFIG_BT_MESH_DEBUG_PROV=y
#CONFIG_BT_MESH_DEBUG_BEACON=y
#CONFIG_BT_MESH_DEBUG_CRYPTO=y
#CONFIG_BT_MESH_DEBUG_ADV=y
#CONFIG_BT_MESH_DEBUG_ACCESS=y