OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/samples/bluetooth/hci_uart/boards/nrf9160dk_nrf52840.overlay

21 lines
297 B
Plaintext
Raw Normal View History

boards: nrf9160dk: Move board control configuration to devicetree Use devicetree instead of Kconfig to configure the board control switches in nRF9160 DK: - add binding for the switches that provide optional signal routings on this board - add binding for the GPIO interface that can be used for communication (e.g. UART based) between the nRF9160 and the nRF52840 on the DK, and add GPIO mapping for this interface so that its lines can be used without caring about of actual pin numbers on both sides - add binding for one GPIO line chosen from the above interface that is to allow the nRF9160 to reset the nRF52840 - update accordingly dts files and board specific code for both board definitions associated with the DK - introduce .dtsi files that can be included from dts overlays in order to facilitate the use of the above GPIO interface; modify the overlay in the hci_uart sample to provide an example of use of those files Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2021-01-26 17:36:35 +08:00
/*
* Copyright (c) 2021 Nordic Semiconductor ASA
*
* SPDX-License-Identifier: Apache-2.0
*/
license: cleanup: add SPDX Apache-2.0 license identifier Update the files which contain no license information with the 'Apache-2.0' SPDX license identifier. Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of Zephyr, which is Apache version 2. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-04-06 21:08:09 +08:00
boards: nrf9160dk: Move board control configuration to devicetree Use devicetree instead of Kconfig to configure the board control switches in nRF9160 DK: - add binding for the switches that provide optional signal routings on this board - add binding for the GPIO interface that can be used for communication (e.g. UART based) between the nRF9160 and the nRF52840 on the DK, and add GPIO mapping for this interface so that its lines can be used without caring about of actual pin numbers on both sides - add binding for one GPIO line chosen from the above interface that is to allow the nRF9160 to reset the nRF52840 - update accordingly dts files and board specific code for both board definitions associated with the DK - introduce .dtsi files that can be included from dts overlays in order to facilitate the use of the above GPIO interface; modify the overlay in the hci_uart sample to provide an example of use of those files Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2021-01-26 17:36:35 +08:00
#include <nrf9160dk_nrf52840_reset_on_if5.dtsi>
#include <nrf9160dk_uart1_on_if0_3.dtsi>
samples: bluetooth: hci_uart: add configuration for nrf52840_pca10090 Add a project configuration for nrf52840_pca10090 that will route the nRF9160 interface pins to the nRF52840, and use them for HCI over UART. Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
2019-01-25 01:25:10 +08:00
&uart1 {
current-speed = <1000000>;
drivers: serial: nrf: Remove flow control configuration from kconfig Removed flow control configuration from Kconfig and updated samples to use device tree for that. Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
2020-06-05 21:27:03 +08:00
hw-flow-control;
boards: nrf9160dk: Move board control configuration to devicetree Use devicetree instead of Kconfig to configure the board control switches in nRF9160 DK: - add binding for the switches that provide optional signal routings on this board - add binding for the GPIO interface that can be used for communication (e.g. UART based) between the nRF9160 and the nRF52840 on the DK, and add GPIO mapping for this interface so that its lines can be used without caring about of actual pin numbers on both sides - add binding for one GPIO line chosen from the above interface that is to allow the nRF9160 to reset the nRF52840 - update accordingly dts files and board specific code for both board definitions associated with the DK - introduce .dtsi files that can be included from dts overlays in order to facilitate the use of the above GPIO interface; modify the overlay in the hci_uart sample to provide an example of use of those files Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2021-01-26 17:36:35 +08:00
};
/ {
chosen {
zephyr,bt-c2h-uart=&uart1;
};
samples: bluetooth: hci_uart: add configuration for nrf52840_pca10090 Add a project configuration for nrf52840_pca10090 that will route the nRF9160 interface pins to the nRF52840, and use them for HCI over UART. Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
2019-01-25 01:25:10 +08:00
};