zephyr/samples/sensor/adxl372/prj_i2c.conf

CONFIG_STDOUT_CONSOLE=y
CONFIG_LOG=y
CONFIG_I2C=y
CONFIG_SENSOR=y
CONFIG_ADXL372=y
CONFIG_ADXL372_I2C=y
CONFIG_SENSOR_LOG_LEVEL_WRN=y
samples: sensor: adxl372: Add ADXL372 sample application This sample application produces slightly different outputs based on the chosen driver configuration mode. In Measuring Mode with trigger support, the acceleration on all three axis is printed in m/s^2 at the sampling rate (ODR). In polled Measuring Mode the instantaneous acceleration is polled every 2 seconds. In most high-g applications, a single (3-axis) acceleration sample at the peak of an impact event contains sufficient information about the event, and the full acceleration history is not required. In this Max Peak Detect Mode the device returns only the over threshold peak acceleration between two consecutive sample fetches or trigger events. Instead of printing the acceleration on all three axis, the sample application calculates the vector magnitude (root sum squared) and displays the result in g rather than in m/s^2, together with an bar graph. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> 2018-08-17 15:31:42 +08:00			`CONFIG_STDOUT_CONSOLE=y`
drivers: sensor: Migrate to new logger Move all sensor drivers and samples to new logging system. Signed-off-by: Punit Vara <punit.vara@intel.com> 2018-10-10 14:38:54 +08:00			`CONFIG_LOG=y`
samples: sensor: adxl372: Add ADXL372 sample application This sample application produces slightly different outputs based on the chosen driver configuration mode. In Measuring Mode with trigger support, the acceleration on all three axis is printed in m/s^2 at the sampling rate (ODR). In polled Measuring Mode the instantaneous acceleration is polled every 2 seconds. In most high-g applications, a single (3-axis) acceleration sample at the peak of an impact event contains sufficient information about the event, and the full acceleration history is not required. In this Max Peak Detect Mode the device returns only the over threshold peak acceleration between two consecutive sample fetches or trigger events. Instead of printing the acceleration on all three axis, the sample application calculates the vector magnitude (root sum squared) and displays the result in g rather than in m/s^2, together with an bar graph. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> 2018-08-17 15:31:42 +08:00			`CONFIG_I2C=y`
			`CONFIG_SENSOR=y`
			`CONFIG_ADXL372=y`
			`CONFIG_ADXL372_I2C=y`
drivers: sensor: Migrate to new logger Move all sensor drivers and samples to new logging system. Signed-off-by: Punit Vara <punit.vara@intel.com> 2018-10-10 14:38:54 +08:00			`CONFIG_SENSOR_LOG_LEVEL_WRN=y`
samples: sensor: adxl372: Add ADXL372 sample application This sample application produces slightly different outputs based on the chosen driver configuration mode. In Measuring Mode with trigger support, the acceleration on all three axis is printed in m/s^2 at the sampling rate (ODR). In polled Measuring Mode the instantaneous acceleration is polled every 2 seconds. In most high-g applications, a single (3-axis) acceleration sample at the peak of an impact event contains sufficient information about the event, and the full acceleration history is not required. In this Max Peak Detect Mode the device returns only the over threshold peak acceleration between two consecutive sample fetches or trigger events. Instead of printing the acceleration on all three axis, the sample application calculates the vector magnitude (root sum squared) and displays the result in g rather than in m/s^2, together with an bar graph. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> 2018-08-17 15:31:42 +08:00