zephyr/boards/arm/stm32f746g_disco/stm32f746g_disco.yaml

identifier: stm32f746g_disco
name: STM32F746GDISCOVERY
type: mcu
arch: arm
toolchain:
  - zephyr
  - gnuarmemb
ram: 320
flash: 1024
supported:
  - netif:eth
  - i2c
  - spi
  - gpio
  - pwm
  - rtc
  - usb_device
boards: arm: stm32: Basic support for STM32F746G-DISCO board The patch contains basic code support, documentation, dts file and openocd configuration for STM32F746G discovery board. This patch related to the issue #6982. Signed-off-by: Yurii Hamann <yurii@hamann.site> 2018-05-29 00:38:26 +08:00			`identifier: stm32f746g_disco`
			`name: STM32F746GDISCOVERY`
			`type: mcu`
			`arch: arm`
			`toolchain:`
			`- zephyr`
build: Replace GCC ARM Embedded with GNU Arm Embedded The old GCC ARM Embedded website on launchpad (https://launchpad.net/gcc-arm-embedded) has been superseeded by the new GNU Arm Embedded one (https://developer.arm.com/open-source/gnu-toolchain/gnu-rm). This also means a change of name from "GCC" to "GNU". Reflect this in the enviroment variables so that the proper term is used henceforth. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no> 2018-08-03 23:11:23 +08:00			`- gnuarmemb`
boards: stm32f746g_disco: Update board yaml This adds the following information: - sram size - flash size - gpio support Signed-off-by: Christian Taedcke <hacking@taedcke.com> 2018-10-10 05:28:14 +08:00			`ram: 320`
			`flash: 1024`
			`supported:`
boards: stm32f746g_disco: Enable Ethernet This adds Ethernet support for the ST STM32F746G Discovery board. Signed-off-by: Christian Taedcke <hacking@taedcke.com> 2018-10-10 05:34:21 +08:00			`- netif:eth`
boards: stm32f746g_disco: Enable a few peripherals This enables I2C, SPI, PWM, RTC and USB. RTC tested on samples/drivers/rtc USB tested on samples/subsys/usb/cdc_acm Signed-off-by: Christian Taedcke <hacking@taedcke.com> 2018-10-17 04:26:47 +08:00			`- i2c`
			`- spi`
boards: stm32f746g_disco: Update board yaml This adds the following information: - sram size - flash size - gpio support Signed-off-by: Christian Taedcke <hacking@taedcke.com> 2018-10-10 05:28:14 +08:00			`- gpio`
boards: stm32f746g_disco: Enable a few peripherals This enables I2C, SPI, PWM, RTC and USB. RTC tested on samples/drivers/rtc USB tested on samples/subsys/usb/cdc_acm Signed-off-by: Christian Taedcke <hacking@taedcke.com> 2018-10-17 04:26:47 +08:00			`- pwm`
			`- rtc`
			`- usb_device`