OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/soc/arm/nxp_imx/mcimx7_m4/Kconfig.defconfig.mcimx7_m4

68 lines
649 B
Plaintext
Raw Normal View History

arch: Add imx7d m4 soc support The i.MX7 SoC is a Hybrid multi-core processor composed by Single/Dual Cortex A7 core and Single Cortex M4 core. Zephyr was ported to run on the M4 core. In a later release, it will also communicate with the A7 core (running Linux) via RPmsg. The low level drivers come from NXP FreeRTOS BSP and are located at ext/hal/nxp/imx. More details can be found at ext/hal/nxp/imx/README The A7 core is responsible to load the M4 binary application into the RAM, put the M4 in reset, set the M4 Program Counter and Stack Pointer, and get the M4 out of reset. The A7 can perform these steps at bootloader level after the Linux system has booted. The M4 can use up to 5 different RAMs. These are the memory mapping for A7 and M4: +---------------+-----------------+---------------------------+ | Memory Name | Start Address | Size | +===============+=================+===========================+ | TCML | 0x007F8000 | 32KB | +---------------+-----------------+---------------------------+ | TCMU | 0x20000000 | 32KB | +---------------+-----------------+---------------------------+ | OCRAM_S | 0x20180000 | 32KB | +---------------+-----------------+---------------------------+ | OCRAM | 0x00900000 | 128KB | +---------------+-----------------+---------------------------+ | DDR | 0x10000000 | 256MB | +---------------+-----------------+---------------------------+ Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-03-16 21:59:33 +08:00
# Kconfig - iMX7 M4 core series
#
# Copyright (c) 2017, NXP
#
# SPDX-License-Identifier: Apache-2.0
#
if SOC_MCIMX7_M4
config SOC
string
soc: defconfig: Consistently quote string defaults In preparation for introducing a warning. Unquoted string defaults work through a quirk of Kconfig (undefined symbols get their name as their string value), but look confusing. It's done inconsistently now too. Suggested by Kumar Gala. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-05-26 03:19:21 +08:00
default "mcimx7d"
arch: Add imx7d m4 soc support The i.MX7 SoC is a Hybrid multi-core processor composed by Single/Dual Cortex A7 core and Single Cortex M4 core. Zephyr was ported to run on the M4 core. In a later release, it will also communicate with the A7 core (running Linux) via RPmsg. The low level drivers come from NXP FreeRTOS BSP and are located at ext/hal/nxp/imx. More details can be found at ext/hal/nxp/imx/README The A7 core is responsible to load the M4 binary application into the RAM, put the M4 in reset, set the M4 Program Counter and Stack Pointer, and get the M4 out of reset. The A7 can perform these steps at bootloader level after the Linux system has booted. The M4 can use up to 5 different RAMs. These are the memory mapping for A7 and M4: +---------------+-----------------+---------------------------+ | Memory Name | Start Address | Size | +===============+=================+===========================+ | TCML | 0x007F8000 | 32KB | +---------------+-----------------+---------------------------+ | TCMU | 0x20000000 | 32KB | +---------------+-----------------+---------------------------+ | OCRAM_S | 0x20180000 | 32KB | +---------------+-----------------+---------------------------+ | OCRAM | 0x00900000 | 128KB | +---------------+-----------------+---------------------------+ | DDR | 0x10000000 | 256MB | +---------------+-----------------+---------------------------+ Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-03-16 21:59:33 +08:00
config SYS_CLOCK_TICKS_PER_SEC
int
default 1000
config SYS_CLOCK_HW_CYCLES_PER_SEC
int
default 200000000
if CLOCK_CONTROL
config CLOCK_CONTROL_IMX_CCM
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y
arch: Add imx7d m4 soc support The i.MX7 SoC is a Hybrid multi-core processor composed by Single/Dual Cortex A7 core and Single Cortex M4 core. Zephyr was ported to run on the M4 core. In a later release, it will also communicate with the A7 core (running Linux) via RPmsg. The low level drivers come from NXP FreeRTOS BSP and are located at ext/hal/nxp/imx. More details can be found at ext/hal/nxp/imx/README The A7 core is responsible to load the M4 binary application into the RAM, put the M4 in reset, set the M4 Program Counter and Stack Pointer, and get the M4 out of reset. The A7 can perform these steps at bootloader level after the Linux system has booted. The M4 can use up to 5 different RAMs. These are the memory mapping for A7 and M4: +---------------+-----------------+---------------------------+ | Memory Name | Start Address | Size | +===============+=================+===========================+ | TCML | 0x007F8000 | 32KB | +---------------+-----------------+---------------------------+ | TCMU | 0x20000000 | 32KB | +---------------+-----------------+---------------------------+ | OCRAM_S | 0x20180000 | 32KB | +---------------+-----------------+---------------------------+ | OCRAM | 0x00900000 | 128KB | +---------------+-----------------+---------------------------+ | DDR | 0x10000000 | 256MB | +---------------+-----------------+---------------------------+ Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-03-16 21:59:33 +08:00
endif # CLOCK_CONTROL
arch: Add imx7d_m4 gpio definitions Adds all necessary gpio definitions and configurations for imx7d_m4 soc. Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-05-08 14:38:50 +08:00
config GPIO
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y
arch: Add imx7d_m4 gpio definitions Adds all necessary gpio definitions and configurations for imx7d_m4 soc. Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-05-08 14:38:50 +08:00
if GPIO
config GPIO_IMX
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y
arch: Add imx7d_m4 gpio definitions Adds all necessary gpio definitions and configurations for imx7d_m4 soc. Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-05-08 14:38:50 +08:00
endif # GPIO
arch: Add imx7d m4 soc support The i.MX7 SoC is a Hybrid multi-core processor composed by Single/Dual Cortex A7 core and Single Cortex M4 core. Zephyr was ported to run on the M4 core. In a later release, it will also communicate with the A7 core (running Linux) via RPmsg. The low level drivers come from NXP FreeRTOS BSP and are located at ext/hal/nxp/imx. More details can be found at ext/hal/nxp/imx/README The A7 core is responsible to load the M4 binary application into the RAM, put the M4 in reset, set the M4 Program Counter and Stack Pointer, and get the M4 out of reset. The A7 can perform these steps at bootloader level after the Linux system has booted. The M4 can use up to 5 different RAMs. These are the memory mapping for A7 and M4: +---------------+-----------------+---------------------------+ | Memory Name | Start Address | Size | +===============+=================+===========================+ | TCML | 0x007F8000 | 32KB | +---------------+-----------------+---------------------------+ | TCMU | 0x20000000 | 32KB | +---------------+-----------------+---------------------------+ | OCRAM_S | 0x20180000 | 32KB | +---------------+-----------------+---------------------------+ | OCRAM | 0x00900000 | 128KB | +---------------+-----------------+---------------------------+ | DDR | 0x10000000 | 256MB | +---------------+-----------------+---------------------------+ Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-03-16 21:59:33 +08:00
if SERIAL
config UART_IMX
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y
arch: Add imx7d m4 soc support The i.MX7 SoC is a Hybrid multi-core processor composed by Single/Dual Cortex A7 core and Single Cortex M4 core. Zephyr was ported to run on the M4 core. In a later release, it will also communicate with the A7 core (running Linux) via RPmsg. The low level drivers come from NXP FreeRTOS BSP and are located at ext/hal/nxp/imx. More details can be found at ext/hal/nxp/imx/README The A7 core is responsible to load the M4 binary application into the RAM, put the M4 in reset, set the M4 Program Counter and Stack Pointer, and get the M4 out of reset. The A7 can perform these steps at bootloader level after the Linux system has booted. The M4 can use up to 5 different RAMs. These are the memory mapping for A7 and M4: +---------------+-----------------+---------------------------+ | Memory Name | Start Address | Size | +===============+=================+===========================+ | TCML | 0x007F8000 | 32KB | +---------------+-----------------+---------------------------+ | TCMU | 0x20000000 | 32KB | +---------------+-----------------+---------------------------+ | OCRAM_S | 0x20180000 | 32KB | +---------------+-----------------+---------------------------+ | OCRAM | 0x00900000 | 128KB | +---------------+-----------------+---------------------------+ | DDR | 0x10000000 | 256MB | +---------------+-----------------+---------------------------+ Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-03-16 21:59:33 +08:00
endif # SERIAL
arch: Add imx7d_m4 i2c definitions Adds all necessary i2c definitions and configurations for imx7d_m4 soc. Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-05-12 05:13:59 +08:00
if I2C
config I2C_IMX
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y
arch: Add imx7d_m4 i2c definitions Adds all necessary i2c definitions and configurations for imx7d_m4 soc. Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-05-12 05:13:59 +08:00
endif # I2C
arch: Add support for i.MX PWM Adds definitions, devicetree entries and clock controller configurations for PWM peripheral. Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-07-08 00:51:10 +08:00
if PWM
config PWM_IMX
Kconfig: Use 'default' instead of 'def_bool' in Kconfig.defconfig files This can help find unused symbols. Those end up without a type if 'default' is used instead of 'def_bool', which generates a warning. Search for "Kconfig.defconfig" in https://docs.zephyrproject.org/latest/application/kconfig-tips.html for a longer explanation. Keep the 'def_bool' for the following symbols, which seem to be deliberately defined only in Kconfig.defconfig files: - ALTERA_AVALON_I2C - ALTERA_AVALON_MSGDMA - ALTERA_AVALON_PIO - ALTERA_AVALON_QSPI - ALTERA_AVALON_SYSID - CLOCK_CONTROL_IMX_CCM - CPU_EM4_DMIPS - CPU_EM4_FPUDA - CPU_EM4_FPUS - FP_FPU_DA - I2C_GECKO Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-11-14 00:15:49 +08:00
default y
arch: Add support for i.MX PWM Adds definitions, devicetree entries and clock controller configurations for PWM peripheral. Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-07-08 00:51:10 +08:00
endif # PWM
drivers/ipm: Add IPM support for i.MX7 This patch ads the support for the IPM drivers on i.MX7 SoC family. Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-11-20 01:42:40 +08:00
if IPM
config IPM_IMX
default y
endif # IPM
arch: Add imx7d m4 soc support The i.MX7 SoC is a Hybrid multi-core processor composed by Single/Dual Cortex A7 core and Single Cortex M4 core. Zephyr was ported to run on the M4 core. In a later release, it will also communicate with the A7 core (running Linux) via RPmsg. The low level drivers come from NXP FreeRTOS BSP and are located at ext/hal/nxp/imx. More details can be found at ext/hal/nxp/imx/README The A7 core is responsible to load the M4 binary application into the RAM, put the M4 in reset, set the M4 Program Counter and Stack Pointer, and get the M4 out of reset. The A7 can perform these steps at bootloader level after the Linux system has booted. The M4 can use up to 5 different RAMs. These are the memory mapping for A7 and M4: +---------------+-----------------+---------------------------+ | Memory Name | Start Address | Size | +===============+=================+===========================+ | TCML | 0x007F8000 | 32KB | +---------------+-----------------+---------------------------+ | TCMU | 0x20000000 | 32KB | +---------------+-----------------+---------------------------+ | OCRAM_S | 0x20180000 | 32KB | +---------------+-----------------+---------------------------+ | OCRAM | 0x00900000 | 128KB | +---------------+-----------------+---------------------------+ | DDR | 0x10000000 | 256MB | +---------------+-----------------+---------------------------+ Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
2018-03-16 21:59:33 +08:00
endif # SOC_MCIMX7_M4