zephyr/boards/arm/stm32l496g_disco/dts.fixup

/* This file is a temporary workaround for mapping of the generated information
 * to the current driver definitions.  This will be removed when the drivers
 * are modified to handle the generated information, or the mapping of
 * generated data matches the driver definitions.
 */

#define CONFIG_NUM_IRQ_PRIO_BITS	ARM_V7M_NVIC_E000E100_ARM_NUM_IRQ_PRIORITY_BITS

#define CONFIG_UART_STM32_PORT_1_BASE_ADDRESS	ST_STM32_USART_40013800_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_1_BAUD_RATE	ST_STM32_USART_40013800_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_1_IRQ_PRI	ST_STM32_USART_40013800_IRQ_0_PRIORITY
#define CONFIG_UART_STM32_PORT_1_NAME		ST_STM32_USART_40013800_LABEL
#define PORT_1_IRQ				ST_STM32_USART_40013800_IRQ_0

#define CONFIG_UART_STM32_PORT_2_BASE_ADDRESS	ST_STM32_USART_40004400_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_2_BAUD_RATE	ST_STM32_USART_40004400_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_2_IRQ_PRI	ST_STM32_USART_40004400_IRQ_0_PRIORITY
#define CONFIG_UART_STM32_PORT_2_NAME		ST_STM32_USART_40004400_LABEL
#define PORT_2_IRQ				ST_STM32_USART_40004400_IRQ_0

#define CONFIG_UART_STM32_PORT_3_BASE_ADDRESS	ST_STM32_USART_40004800_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_3_BAUD_RATE	ST_STM32_USART_40004800_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_3_IRQ_PRI	ST_STM32_USART_40004800_IRQ_0_PRIORITY
#define CONFIG_UART_STM32_PORT_3_NAME		ST_STM32_USART_40004800_LABEL
#define PORT_3_IRQ				ST_STM32_USART_40004800_IRQ_0

#define CONFIG_UART_STM32_PORT_4_BASE_ADDRESS	ST_STM32_UART_40004C00_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_4_BAUD_RATE	ST_STM32_UART_40004C00_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_4_IRQ_PRI	ST_STM32_UART_40004C00_IRQ_0_PRIORITY
#define CONFIG_UART_STM32_PORT_4_NAME		ST_STM32_UART_40004C00_LABEL
#define PORT_4_IRQ				ST_STM32_UART_40004C00_IRQ_0

#define CONFIG_UART_STM32_PORT_5_BASE_ADDRESS	ST_STM32_UART_40005000_BASE_ADDRESS
#define CONFIG_UART_STM32_PORT_5_BAUD_RATE	ST_STM32_UART_40005000_CURRENT_SPEED
#define CONFIG_UART_STM32_PORT_5_IRQ_PRI	ST_STM32_UART_40005000_IRQ_0_PRIORITY
#define CONFIG_UART_STM32_PORT_5_NAME		ST_STM32_UART_40005000_LABEL
#define PORT_5_IRQ				ST_STM32_UART_40005000_IRQ_0
boards: arm: Add support for STM32L496G Discovery board Add configuration, pinmux, dts and documentation for the STM32L496G Discovery board based on the STM32L496AG SoC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> 2017-05-09 20:29:01 +08:00			`/* This file is a temporary workaround for mapping of the generated information`
			`* to the current driver definitions. This will be removed when the drivers`
			`* are modified to handle the generated information, or the mapping of`
			`* generated data matches the driver definitions.`
			`*/`

			`#define CONFIG_NUM_IRQ_PRIO_BITS ARM_V7M_NVIC_E000E100_ARM_NUM_IRQ_PRIORITY_BITS`

			`#define CONFIG_UART_STM32_PORT_1_BASE_ADDRESS ST_STM32_USART_40013800_BASE_ADDRESS`
			`#define CONFIG_UART_STM32_PORT_1_BAUD_RATE ST_STM32_USART_40013800_CURRENT_SPEED`
			`#define CONFIG_UART_STM32_PORT_1_IRQ_PRI ST_STM32_USART_40013800_IRQ_0_PRIORITY`
arm: stm32: dts: use label to generate STM32 uart name Now that we can utilize label in the device tree we can convert to getting the device name for the STM32 UART out of the device tree instead of from Kconfig. Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2017-05-17 04:50:20 +08:00			`#define CONFIG_UART_STM32_PORT_1_NAME ST_STM32_USART_40013800_LABEL`
boards: arm: Add support for STM32L496G Discovery board Add configuration, pinmux, dts and documentation for the STM32L496G Discovery board based on the STM32L496AG SoC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> 2017-05-09 20:29:01 +08:00			`#define PORT_1_IRQ ST_STM32_USART_40013800_IRQ_0`

			`#define CONFIG_UART_STM32_PORT_2_BASE_ADDRESS ST_STM32_USART_40004400_BASE_ADDRESS`
			`#define CONFIG_UART_STM32_PORT_2_BAUD_RATE ST_STM32_USART_40004400_CURRENT_SPEED`
			`#define CONFIG_UART_STM32_PORT_2_IRQ_PRI ST_STM32_USART_40004400_IRQ_0_PRIORITY`
arm: stm32: dts: use label to generate STM32 uart name Now that we can utilize label in the device tree we can convert to getting the device name for the STM32 UART out of the device tree instead of from Kconfig. Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2017-05-17 04:50:20 +08:00			`#define CONFIG_UART_STM32_PORT_2_NAME ST_STM32_USART_40004400_LABEL`
boards: arm: Add support for STM32L496G Discovery board Add configuration, pinmux, dts and documentation for the STM32L496G Discovery board based on the STM32L496AG SoC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> 2017-05-09 20:29:01 +08:00			`#define PORT_2_IRQ ST_STM32_USART_40004400_IRQ_0`

			`#define CONFIG_UART_STM32_PORT_3_BASE_ADDRESS ST_STM32_USART_40004800_BASE_ADDRESS`
			`#define CONFIG_UART_STM32_PORT_3_BAUD_RATE ST_STM32_USART_40004800_CURRENT_SPEED`
			`#define CONFIG_UART_STM32_PORT_3_IRQ_PRI ST_STM32_USART_40004800_IRQ_0_PRIORITY`
arm: stm32: dts: use label to generate STM32 uart name Now that we can utilize label in the device tree we can convert to getting the device name for the STM32 UART out of the device tree instead of from Kconfig. Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2017-05-17 04:50:20 +08:00			`#define CONFIG_UART_STM32_PORT_3_NAME ST_STM32_USART_40004800_LABEL`
boards: arm: Add support for STM32L496G Discovery board Add configuration, pinmux, dts and documentation for the STM32L496G Discovery board based on the STM32L496AG SoC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> 2017-05-09 20:29:01 +08:00			`#define PORT_3_IRQ ST_STM32_USART_40004800_IRQ_0`

dts: stm32: uart nodes were missing yaml description This commit fixes uart only nodes situation for stm32 devices. st,stm32-uart yaml description is added to enable compilation Change-Id: Iea78693bdfb90fbb09612b75685ed7ca0ccca6d6 Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org> 2017-05-18 22:08:30 +08:00			`#define CONFIG_UART_STM32_PORT_4_BASE_ADDRESS ST_STM32_UART_40004C00_BASE_ADDRESS`
			`#define CONFIG_UART_STM32_PORT_4_BAUD_RATE ST_STM32_UART_40004C00_CURRENT_SPEED`
			`#define CONFIG_UART_STM32_PORT_4_IRQ_PRI ST_STM32_UART_40004C00_IRQ_0_PRIORITY`
			`#define CONFIG_UART_STM32_PORT_4_NAME ST_STM32_UART_40004C00_LABEL`
			`#define PORT_4_IRQ ST_STM32_UART_40004C00_IRQ_0`
boards: arm: Add support for STM32L496G Discovery board Add configuration, pinmux, dts and documentation for the STM32L496G Discovery board based on the STM32L496AG SoC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> 2017-05-09 20:29:01 +08:00
dts: stm32: uart nodes were missing yaml description This commit fixes uart only nodes situation for stm32 devices. st,stm32-uart yaml description is added to enable compilation Change-Id: Iea78693bdfb90fbb09612b75685ed7ca0ccca6d6 Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org> 2017-05-18 22:08:30 +08:00			`#define CONFIG_UART_STM32_PORT_5_BASE_ADDRESS ST_STM32_UART_40005000_BASE_ADDRESS`
			`#define CONFIG_UART_STM32_PORT_5_BAUD_RATE ST_STM32_UART_40005000_CURRENT_SPEED`
			`#define CONFIG_UART_STM32_PORT_5_IRQ_PRI ST_STM32_UART_40005000_IRQ_0_PRIORITY`
			`#define CONFIG_UART_STM32_PORT_5_NAME ST_STM32_UART_40005000_LABEL`
			`#define PORT_5_IRQ ST_STM32_UART_40005000_IRQ_0`