OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/boards/arm/bbc_microbit/board.h

95 lines
3.0 KiB
C
Raw Normal View History

boards: Add support for the BBC micro:bit nRF51 board Board uses nRF51822-QFAA, with 16kB of RAM and 256kB of flash. The UART has no hardware flow control pins. Change-Id: I16ffeee15a1f5714c695dc8b38e77fb134ea7a0f Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no> Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
2016-11-02 16:22:29 +08:00
/*
* Copyright (c) 2016 Nordic Semiconductor ASA.
*
license: Replace Apache boilerplate with SPDX tag Replace the existing Apache 2.0 boilerplate header with an SPDX tag throughout the zephyr code tree. This patch was generated via a script run over the master branch. Also updated doc/porting/application.rst that had a dependency on line numbers in a literal include. Manually updated subsys/logging/sys_log.c that had a malformed header in the original file. Also cleanup several cases that already had a SPDX tag and we either got a duplicate or missed updating. Jira: ZEP-1457 Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c Signed-off-by: David B. Kinder <david.b.kinder@intel.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-01-19 09:01:01 +08:00
* SPDX-License-Identifier: Apache-2.0
boards: Add support for the BBC micro:bit nRF51 board Board uses nRF51822-QFAA, with 16kB of RAM and 256kB of flash. The UART has no hardware flow control pins. Change-Id: I16ffeee15a1f5714c695dc8b38e77fb134ea7a0f Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no> Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
2016-11-02 16:22:29 +08:00
*/
#ifndef __INC_BOARD_H
#define __INC_BOARD_H
#include <soc.h>
boards: bbc_microbit: Add button and LED definitions For the basic samples to work, button and LED definitions are required in board.h. These map the buttons and LEDs present on the board to the corresponding GPIOs they are wired into. In this particular case the LEDs are actually arranged in a 3x9 matrix, with the GPIOs wired to the rows and columns of said matrix. An upcoming patch will provide utility functions to access the matrix. Change-Id: Icce93ee6a08ae28445c6dc4a41529105ac80f14a Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2016-12-09 00:12:03 +08:00
/* Push button switch 0 (BTN_A) */
#define SW0_GPIO_PIN 17
#define SW0_GPIO_NAME CONFIG_GPIO_NRF5_P0_DEV_NAME
/* Push button switch 1 (BTN_B) */
#define SW1_GPIO_PIN 26
#define SW1_GPIO_NAME CONFIG_GPIO_NRF5_P0_DEV_NAME
boards: bbc_microbit: Remove bogus references to green LEDs The LEDs on BBC micro:bit boards are red and not green. Since mentioning the color doesn't really provide any value to the GPIO pin definitions, just remove it. Change-Id: I7f53e0d8a0733cda911a624d0b53c750eacfa685 Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-04-05 02:55:27 +08:00
/* Onboard LED Row 1 */
boards: bbc_microbit: Add button and LED definitions For the basic samples to work, button and LED definitions are required in board.h. These map the buttons and LEDs present on the board to the corresponding GPIOs they are wired into. In this particular case the LEDs are actually arranged in a 3x9 matrix, with the GPIOs wired to the rows and columns of said matrix. An upcoming patch will provide utility functions to access the matrix. Change-Id: Icce93ee6a08ae28445c6dc4a41529105ac80f14a Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2016-12-09 00:12:03 +08:00
#define LED_ROW1_GPIO_PIN 13
#define LED_ROW1_GPIO_PORT CONFIG_GPIO_NRF5_P0_DEV_NAME
boards: bbc_microbit: Remove bogus references to green LEDs The LEDs on BBC micro:bit boards are red and not green. Since mentioning the color doesn't really provide any value to the GPIO pin definitions, just remove it. Change-Id: I7f53e0d8a0733cda911a624d0b53c750eacfa685 Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-04-05 02:55:27 +08:00
/* Onboard LED Row 2 */
boards: bbc_microbit: Add button and LED definitions For the basic samples to work, button and LED definitions are required in board.h. These map the buttons and LEDs present on the board to the corresponding GPIOs they are wired into. In this particular case the LEDs are actually arranged in a 3x9 matrix, with the GPIOs wired to the rows and columns of said matrix. An upcoming patch will provide utility functions to access the matrix. Change-Id: Icce93ee6a08ae28445c6dc4a41529105ac80f14a Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2016-12-09 00:12:03 +08:00
#define LED_ROW2_GPIO_PIN 14
#define LED_ROW2_GPIO_PORT CONFIG_GPIO_NRF5_P0_DEV_NAME
boards: bbc_microbit: Remove bogus references to green LEDs The LEDs on BBC micro:bit boards are red and not green. Since mentioning the color doesn't really provide any value to the GPIO pin definitions, just remove it. Change-Id: I7f53e0d8a0733cda911a624d0b53c750eacfa685 Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-04-05 02:55:27 +08:00
/* Onboard LED Row 3 */
boards: bbc_microbit: Add button and LED definitions For the basic samples to work, button and LED definitions are required in board.h. These map the buttons and LEDs present on the board to the corresponding GPIOs they are wired into. In this particular case the LEDs are actually arranged in a 3x9 matrix, with the GPIOs wired to the rows and columns of said matrix. An upcoming patch will provide utility functions to access the matrix. Change-Id: Icce93ee6a08ae28445c6dc4a41529105ac80f14a Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2016-12-09 00:12:03 +08:00
#define LED_ROW3_GPIO_PIN 15
#define LED_ROW3_GPIO_PORT CONFIG_GPIO_NRF5_P0_DEV_NAME
boards: bbc_microbit: Remove bogus references to green LEDs The LEDs on BBC micro:bit boards are red and not green. Since mentioning the color doesn't really provide any value to the GPIO pin definitions, just remove it. Change-Id: I7f53e0d8a0733cda911a624d0b53c750eacfa685 Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-04-05 02:55:27 +08:00
/* Onboard LED Column 1 */
boards: bbc_microbit: Add button and LED definitions For the basic samples to work, button and LED definitions are required in board.h. These map the buttons and LEDs present on the board to the corresponding GPIOs they are wired into. In this particular case the LEDs are actually arranged in a 3x9 matrix, with the GPIOs wired to the rows and columns of said matrix. An upcoming patch will provide utility functions to access the matrix. Change-Id: Icce93ee6a08ae28445c6dc4a41529105ac80f14a Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2016-12-09 00:12:03 +08:00
#define LED_COL1_GPIO_PIN 4
#define LED_COL1_GPIO_PORT CONFIG_GPIO_NRF5_P0_DEV_NAME
boards: bbc_microbit: Remove bogus references to green LEDs The LEDs on BBC micro:bit boards are red and not green. Since mentioning the color doesn't really provide any value to the GPIO pin definitions, just remove it. Change-Id: I7f53e0d8a0733cda911a624d0b53c750eacfa685 Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-04-05 02:55:27 +08:00
/* Onboard LED Column 2 */
boards: bbc_microbit: Add button and LED definitions For the basic samples to work, button and LED definitions are required in board.h. These map the buttons and LEDs present on the board to the corresponding GPIOs they are wired into. In this particular case the LEDs are actually arranged in a 3x9 matrix, with the GPIOs wired to the rows and columns of said matrix. An upcoming patch will provide utility functions to access the matrix. Change-Id: Icce93ee6a08ae28445c6dc4a41529105ac80f14a Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2016-12-09 00:12:03 +08:00
#define LED_COL2_GPIO_PIN 5
#define LED_COL2_GPIO_PORT CONFIG_GPIO_NRF5_P0_DEV_NAME
boards: bbc_microbit: Remove bogus references to green LEDs The LEDs on BBC micro:bit boards are red and not green. Since mentioning the color doesn't really provide any value to the GPIO pin definitions, just remove it. Change-Id: I7f53e0d8a0733cda911a624d0b53c750eacfa685 Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-04-05 02:55:27 +08:00
/* Onboard LED Column 3 */
boards: bbc_microbit: Add button and LED definitions For the basic samples to work, button and LED definitions are required in board.h. These map the buttons and LEDs present on the board to the corresponding GPIOs they are wired into. In this particular case the LEDs are actually arranged in a 3x9 matrix, with the GPIOs wired to the rows and columns of said matrix. An upcoming patch will provide utility functions to access the matrix. Change-Id: Icce93ee6a08ae28445c6dc4a41529105ac80f14a Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2016-12-09 00:12:03 +08:00
#define LED_COL3_GPIO_PIN 6
#define LED_COL3_GPIO_PORT CONFIG_GPIO_NRF5_P0_DEV_NAME
boards: bbc_microbit: Remove bogus references to green LEDs The LEDs on BBC micro:bit boards are red and not green. Since mentioning the color doesn't really provide any value to the GPIO pin definitions, just remove it. Change-Id: I7f53e0d8a0733cda911a624d0b53c750eacfa685 Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-04-05 02:55:27 +08:00
/* Onboard LED Column 4 */
boards: bbc_microbit: Add button and LED definitions For the basic samples to work, button and LED definitions are required in board.h. These map the buttons and LEDs present on the board to the corresponding GPIOs they are wired into. In this particular case the LEDs are actually arranged in a 3x9 matrix, with the GPIOs wired to the rows and columns of said matrix. An upcoming patch will provide utility functions to access the matrix. Change-Id: Icce93ee6a08ae28445c6dc4a41529105ac80f14a Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2016-12-09 00:12:03 +08:00
#define LED_COL4_GPIO_PIN 7
#define LED_COL4_GPIO_PORT CONFIG_GPIO_NRF5_P0_DEV_NAME
boards: bbc_microbit: Remove bogus references to green LEDs The LEDs on BBC micro:bit boards are red and not green. Since mentioning the color doesn't really provide any value to the GPIO pin definitions, just remove it. Change-Id: I7f53e0d8a0733cda911a624d0b53c750eacfa685 Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-04-05 02:55:27 +08:00
/* Onboard LED Column 5 */
boards: bbc_microbit: Add button and LED definitions For the basic samples to work, button and LED definitions are required in board.h. These map the buttons and LEDs present on the board to the corresponding GPIOs they are wired into. In this particular case the LEDs are actually arranged in a 3x9 matrix, with the GPIOs wired to the rows and columns of said matrix. An upcoming patch will provide utility functions to access the matrix. Change-Id: Icce93ee6a08ae28445c6dc4a41529105ac80f14a Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2016-12-09 00:12:03 +08:00
#define LED_COL5_GPIO_PIN 8
#define LED_COL5_GPIO_PORT CONFIG_GPIO_NRF5_P0_DEV_NAME
boards: bbc_microbit: Remove bogus references to green LEDs The LEDs on BBC micro:bit boards are red and not green. Since mentioning the color doesn't really provide any value to the GPIO pin definitions, just remove it. Change-Id: I7f53e0d8a0733cda911a624d0b53c750eacfa685 Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-04-05 02:55:27 +08:00
/* Onboard LED Column 6 */
boards: bbc_microbit: Add button and LED definitions For the basic samples to work, button and LED definitions are required in board.h. These map the buttons and LEDs present on the board to the corresponding GPIOs they are wired into. In this particular case the LEDs are actually arranged in a 3x9 matrix, with the GPIOs wired to the rows and columns of said matrix. An upcoming patch will provide utility functions to access the matrix. Change-Id: Icce93ee6a08ae28445c6dc4a41529105ac80f14a Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2016-12-09 00:12:03 +08:00
#define LED_COL6_GPIO_PIN 9
#define LED_COL6_GPIO_PORT CONFIG_GPIO_NRF5_P0_DEV_NAME
boards: bbc_microbit: Remove bogus references to green LEDs The LEDs on BBC micro:bit boards are red and not green. Since mentioning the color doesn't really provide any value to the GPIO pin definitions, just remove it. Change-Id: I7f53e0d8a0733cda911a624d0b53c750eacfa685 Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-04-05 02:55:27 +08:00
/* Onboard LED Column 7 */
boards: bbc_microbit: Add button and LED definitions For the basic samples to work, button and LED definitions are required in board.h. These map the buttons and LEDs present on the board to the corresponding GPIOs they are wired into. In this particular case the LEDs are actually arranged in a 3x9 matrix, with the GPIOs wired to the rows and columns of said matrix. An upcoming patch will provide utility functions to access the matrix. Change-Id: Icce93ee6a08ae28445c6dc4a41529105ac80f14a Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2016-12-09 00:12:03 +08:00
#define LED_COL7_GPIO_PIN 10
#define LED_COL7_GPIO_PORT CONFIG_GPIO_NRF5_P0_DEV_NAME
boards: bbc_microbit: Remove bogus references to green LEDs The LEDs on BBC micro:bit boards are red and not green. Since mentioning the color doesn't really provide any value to the GPIO pin definitions, just remove it. Change-Id: I7f53e0d8a0733cda911a624d0b53c750eacfa685 Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-04-05 02:55:27 +08:00
/* Onboard LED Column 8 */
boards: bbc_microbit: Add button and LED definitions For the basic samples to work, button and LED definitions are required in board.h. These map the buttons and LEDs present on the board to the corresponding GPIOs they are wired into. In this particular case the LEDs are actually arranged in a 3x9 matrix, with the GPIOs wired to the rows and columns of said matrix. An upcoming patch will provide utility functions to access the matrix. Change-Id: Icce93ee6a08ae28445c6dc4a41529105ac80f14a Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2016-12-09 00:12:03 +08:00
#define LED_COL8_GPIO_PIN 11
#define LED_COL8_GPIO_PORT CONFIG_GPIO_NRF5_P0_DEV_NAME
boards: bbc_microbit: Remove bogus references to green LEDs The LEDs on BBC micro:bit boards are red and not green. Since mentioning the color doesn't really provide any value to the GPIO pin definitions, just remove it. Change-Id: I7f53e0d8a0733cda911a624d0b53c750eacfa685 Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-04-05 02:55:27 +08:00
/* Onboard LED Column 9 */
boards: bbc_microbit: Add button and LED definitions For the basic samples to work, button and LED definitions are required in board.h. These map the buttons and LEDs present on the board to the corresponding GPIOs they are wired into. In this particular case the LEDs are actually arranged in a 3x9 matrix, with the GPIOs wired to the rows and columns of said matrix. An upcoming patch will provide utility functions to access the matrix. Change-Id: Icce93ee6a08ae28445c6dc4a41529105ac80f14a Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2016-12-09 00:12:03 +08:00
#define LED_COL9_GPIO_PIN 12
#define LED_COL9_GPIO_PORT CONFIG_GPIO_NRF5_P0_DEV_NAME
boards: bbc_microbit: Add defines for all edge connector pins The schematics of the BBC micro:bit are hard to find, and its official web-site doesn't document the mapping of the edge connector pins numbers the nRF51 GPIO pin numbers. Provide helpful defines for this in the board.h file. Change-Id: I52ce1d61558703b6aa5a5d073ccd222f27fa8760 Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-04-12 16:42:37 +08:00
/* External edge connector pin mappings to nRF51 GPIO pin numbers.
* More information:
* https://www.microbit.co.uk/device/pins
* https://github.com/microbit-foundation/microbit-reference-design/tree/master/PDF/Schematic%20Print
*/
#define EXT_P0_GPIO_PIN 3 /* P0, Analog in */
#define EXT_P1_GPIO_PIN 2 /* P1, Analog in */
#define EXT_P2_GPIO_PIN 1 /* P2, Analog in */
#define EXT_P3_GPIO_PIN 4 /* P3, Analog in, LED Col 1 */
#define EXT_P4_GPIO_PIN 5 /* P4, Analog in, LED Col 2 */
#define EXT_P5_GPIO_PIN 17 /* P5, Button A */
#define EXT_P6_GPIO_PIN 12 /* P6, LED Col 9 */
#define EXT_P7_GPIO_PIN 11 /* P7, LED Col 8 */
#define EXT_P8_GPIO_PIN 18 /* P8 */
#define EXT_P9_GPIO_PIN 10 /* P9, LED Col 7 */
#define EXT_P10_GPIO_PIN 6 /* P10, Analog in, LED Col 3 */
#define EXT_P11_GPIO_PIN 26 /* P11, Button B */
#define EXT_P12_GPIO_PIN 20 /* P12 */
#define EXT_P13_GPIO_PIN 23 /* P13, SPI1 SCK */
#define EXT_P14_GPIO_PIN 22 /* P14, SPI1 MISO */
#define EXT_P15_GPIO_PIN 21 /* P15, SPI1 MOSI */
#define EXT_P16_GPIO_PIN 16 /* P16 */
/* 17 and 18 are just 3.3V pins */
#define EXT_P19_GPIO_PIN 0 /* P19, I2C1 SCL */
#define EXT_P20_GPIO_PIN 30 /* P20, I2C1 SDA */
boards: Add support for the BBC micro:bit nRF51 board Board uses nRF51822-QFAA, with 16kB of RAM and 256kB of flash. The UART has no hardware flow control pins. Change-Id: I16ffeee15a1f5714c695dc8b38e77fb134ea7a0f Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no> Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
2016-11-02 16:22:29 +08:00
#endif /* __INC_BOARD_H */