OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/drivers/lora/Kconfig.sx12xx

49 lines
1.3 KiB
Plaintext
Raw Normal View History

drivers: lora: Prepare Kconfig for additional radios Add a new configuration option, LORA_SX12XX, that is shared for all of the LoRaMAC-node-based radio drivers. By default, the appropriate driver for the LoRa radio in the device tree is included is included in the build. Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
2020-05-06 04:50:44 +08:00
#
# Copyright (c) 2019 Manivannan Sadhasivam
#
# SPDX-License-Identifier: Apache-2.0
#
drivers: lora: sx127x: rework SX1276 driver to add SX1272 support SX1272 chip is very similar to the already supported SX1276; unfortunately, Semtech provides a completely separate driver for this one. This commit marks an attempt to avoid code duplication by means of some not-very-pretty ifdefery. Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
2021-01-25 10:04:22 +08:00
DT_COMPAT_SEMTECH_SX1272 := semtech,sx1272
drivers: lora: Prepare Kconfig for additional radios Add a new configuration option, LORA_SX12XX, that is shared for all of the LoRaMAC-node-based radio drivers. By default, the appropriate driver for the LoRa radio in the device tree is included is included in the build. Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
2020-05-06 04:50:44 +08:00
DT_COMPAT_SEMTECH_SX1276 := semtech,sx1276
drivers: lora: Add SX126x LoRa radio support Add support for the SX126x series of LoRa radios using the LoRaMAC-Node HAL. This driver currently makes the following assumptions: * DIO1 is used as an interrupt line. * There is an RF switch selecting between the TX and RX ports and that switch is controlled by DIO2. * There is either no TCXO or the TCXO is controlled by DIO3. Specifically, the limitations above mean that modules that use GPIOs to control the RF switch are currently not supported. Support for such modules would need changes to the LoRaMAC-Node code. Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
2020-04-17 20:36:36 +08:00
DT_COMPAT_SEMTECH_SX1261 := semtech,sx1261
DT_COMPAT_SEMTECH_SX1262 := semtech,sx1262
drivers: lora: Prepare Kconfig for additional radios Add a new configuration option, LORA_SX12XX, that is shared for all of the LoRaMAC-node-based radio drivers. By default, the appropriate driver for the LoRa radio in the device tree is included is included in the build. Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
2020-05-06 04:50:44 +08:00
menuconfig LORA_SX12XX
bool "Semtech SX-series driver"
select HAS_SEMTECH_RADIO_DRIVERS
select HAS_SEMTECH_LORAMAC
depends on SPI
help
Enable LoRa driver for Semtech SX12xx.
if LORA_SX12XX
choice
prompt "LoRa Radio chipset"
drivers: lora: sx127x: rework SX1276 driver to add SX1272 support SX1272 chip is very similar to the already supported SX1276; unfortunately, Semtech provides a completely separate driver for this one. This commit marks an attempt to avoid code duplication by means of some not-very-pretty ifdefery. Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
2021-01-25 10:04:22 +08:00
default LORA_SX127X if $(dt_compat_enabled,$(DT_COMPAT_SEMTECH_SX1272))
default LORA_SX127X if $(dt_compat_enabled,$(DT_COMPAT_SEMTECH_SX1276))
drivers: lora: Add SX126x LoRa radio support Add support for the SX126x series of LoRa radios using the LoRaMAC-Node HAL. This driver currently makes the following assumptions: * DIO1 is used as an interrupt line. * There is an RF switch selecting between the TX and RX ports and that switch is controlled by DIO2. * There is either no TCXO or the TCXO is controlled by DIO3. Specifically, the limitations above mean that modules that use GPIOs to control the RF switch are currently not supported. Support for such modules would need changes to the LoRaMAC-Node code. Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
2020-04-17 20:36:36 +08:00
default LORA_SX126X if $(dt_compat_enabled,$(DT_COMPAT_SEMTECH_SX1261))
default LORA_SX126X if $(dt_compat_enabled,$(DT_COMPAT_SEMTECH_SX1262))
drivers: lora: Prepare Kconfig for additional radios Add a new configuration option, LORA_SX12XX, that is shared for all of the LoRaMAC-node-based radio drivers. By default, the appropriate driver for the LoRa radio in the device tree is included is included in the build. Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
2020-05-06 04:50:44 +08:00
help
Select the LoRa modem used on your board. The default value
is discovered from the device tree and should be correct for
most users.
drivers: lora: sx127x: rework SX1276 driver to add SX1272 support SX1272 chip is very similar to the already supported SX1276; unfortunately, Semtech provides a completely separate driver for this one. This commit marks an attempt to avoid code duplication by means of some not-very-pretty ifdefery. Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
2021-01-25 10:04:22 +08:00
config LORA_SX127X
bool "Semtech SX127x driver"
select HAS_SEMTECH_SX1272 if $(dt_compat_enabled,$(DT_COMPAT_SEMTECH_SX1272))
select HAS_SEMTECH_SX1276 if $(dt_compat_enabled,$(DT_COMPAT_SEMTECH_SX1276))
drivers: lora: Prepare Kconfig for additional radios Add a new configuration option, LORA_SX12XX, that is shared for all of the LoRaMAC-node-based radio drivers. By default, the appropriate driver for the LoRa radio in the device tree is included is included in the build. Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
2020-05-06 04:50:44 +08:00
help
drivers: lora: sx127x: rework SX1276 driver to add SX1272 support SX1272 chip is very similar to the already supported SX1276; unfortunately, Semtech provides a completely separate driver for this one. This commit marks an attempt to avoid code duplication by means of some not-very-pretty ifdefery. Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
2021-01-25 10:04:22 +08:00
Enable LoRa driver for Semtech SX1272 and SX1276.
drivers: lora: Prepare Kconfig for additional radios Add a new configuration option, LORA_SX12XX, that is shared for all of the LoRaMAC-node-based radio drivers. By default, the appropriate driver for the LoRa radio in the device tree is included is included in the build. Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
2020-05-06 04:50:44 +08:00
drivers: lora: Add SX126x LoRa radio support Add support for the SX126x series of LoRa radios using the LoRaMAC-Node HAL. This driver currently makes the following assumptions: * DIO1 is used as an interrupt line. * There is an RF switch selecting between the TX and RX ports and that switch is controlled by DIO2. * There is either no TCXO or the TCXO is controlled by DIO3. Specifically, the limitations above mean that modules that use GPIOs to control the RF switch are currently not supported. Support for such modules would need changes to the LoRaMAC-Node code. Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
2020-04-17 20:36:36 +08:00
config LORA_SX126X
bool "Semtech SX126x driver"
select HAS_SEMTECH_SX126X
help
Enable LoRa driver for Semtech SX1261 and SX1262.
drivers: lora: Prepare Kconfig for additional radios Add a new configuration option, LORA_SX12XX, that is shared for all of the LoRaMAC-node-based radio drivers. By default, the appropriate driver for the LoRa radio in the device tree is included is included in the build. Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
2020-05-06 04:50:44 +08:00
endchoice
endif